| No. | Part No. | Name |
|---|---|---|
| 1 | WG1642233105 | HOWO Left rear fender |
| 2 | WG1642233001 | HOWO right rear fender |
| 3 | WG1642230111 | Rear fender lining |
| 4 | WG1642231111 | Left rear fender cushion lining (8X8) |
| 5 | WG1642230008 | gasket |
| 6 | Q40116 | Flat washer |
| 7 | Q2714216 | Cross recessed pan head tapping screw_ST4.2×16 |
| 8 | Q150B0875 | Hexagon head bolt |
| 9 | Q150B0830 | Hexagon head bolt |
| 10 | Q40208 | Big washer |
| 11 | Q40308 | Spring washer |
| 12 | Q340B08 | Hexagon nut type 1 |
The HOWO Left rear fender is a precision‑formed steel panel that shields the left rear wheel and chassis from mud, stones, and road debris. It is manufactured to match the exact contour of the HOWO 7 body, ensuring a perfect fit and a factory‑finish appearance. This Rear fender component is coated with an anti‑corrosion primer and topcoat, providing long‑lasting protection against rust and chipping.
The HOWO right rear fender is the mirror‑image counterpart, providing symmetrical protection for the right rear wheel. Together with the left fender, these Rear fender components ensure balanced coverage and consistent appearance across the vehicle’s rear axle.
The part lining is a durable rubber or plastic sheet that lines the inner surface of the fender, providing an additional barrier against water, mud, and stone impact. It helps to protect the metal fender from corrosion and reduces road noise inside the cab.
The Left rear fender cushion lining is a specialised rubber cushion that fits between the fender and the chassis, absorbing vibration and preventing metal‑to‑metal contact. Its 8X8 dimension refers to its thickness and density, providing optimal damping for The part assembly.
The gasket is a compressible sealing material placed between mating surfaces to prevent water and dirt ingress. In The part assembly, it is used around bolt holes and panel overlaps, ensuring a tight seal and reducing the risk of corrosion.
The Flat washer is a plain steel ring that distributes the clamping load of the bolt over a larger area, preventing damage to the fender or lining material. It is used in conjunction with bolts and nuts to ensure a secure, leak‑free connection.
This self‑tapping screw features a cross‑recessed pan head, designed for fastening plastic linings and lightweight components. Its ST4.2×16 dimensions are optimised for The part lining, providing a secure hold without the need for pre‑drilling.
The Hexagon head bolt is a general‑purpose fastener used throughout The part assembly for attaching the fenders to the chassis. Its hexagonal head allows for easy tightening with standard wrenches, and it is available in two lengths (75mm and 30mm) to suit different mounting depths.
The Big washer is a larger‑diameter flat washer used under the bolt head or nut to spread the load over a wider area. It is particularly important in The part assembly, where it protects the fender material from damage and ensures a stable mounting.
The Spring washer is a split‑ring lock washer that provides tension to prevent the fastener from backing out under vibration. It is used in high‑stress areas of The part assembly to ensure that bolts and nuts remain securely tightened.
The Hexagon nut type 1 is a standard metric nut used with the hexagon head bolts to secure The part components. It is made from high‑strength steel with a zinc‑plated finish for corrosion resistance, ensuring long‑lasting reliability.
Our Rear fender components are manufactured to Sinotruk’s original specifications, guaranteeing a perfect fit on the HOWO 7 chassis. The left and right fenders are designed as mirror images, ensuring symmetrical installation and consistent protection.
The Rear fender kit protects the chassis, suspension, and bodywork from mud, stones, and road salt. The cushion lining and gaskets further reduce vibration and noise, enhancing driver comfort and extending the life of the vehicle.
We supply every bolt, washer, screw, and nut needed for a full Rear fender installation. No additional parts are required, saving time and ensuring a professional, hassle‑free replacement.
All metal components are coated with anti‑corrosion finishes, and the rubber linings are UV‑stabilised. The Rear fender is built to withstand the harsh conditions of dump truck operation, providing long‑term protection and reliability.
The Rear fender is an essential body component that protects the rear wheel area from the elements and road debris. Over time, the original fenders can become damaged by stones, corroded, or faded by UV exposure. Replacing them with our genuine Rear fender assembly restores the vehicle’s appearance and safeguards the underlying chassis and suspension components.
The left and right rear fenders are precision‑stamped from high‑strength steel, with the exact curvature needed to match the HOWO 7 bodywork. They are pre‑drilled with mounting holes that align perfectly with the chassis brackets, simplifying installation and ensuring a factory‑fit appearance.
The rear fender lining is a tough, flexible sheet that sits between the fender and the wheel, providing an additional barrier against water, mud, and stone impact. It is made from a durable rubber compound that resists tearing and abrasion, extending the life of the metal fender.
The left rear fender cushion lining (8X8) is a specialised rubber pad that fits between the fender and the chassis, absorbing vibration and preventing metal‑to‑metal contact. Its 8X8 specification refers to its thickness and density, providing optimal damping for the Rear fender assembly. This component is particularly important for vehicles that operate on rough terrain, as it reduces rattling and extends the life of the mounting hardware.
The gasket is a small but important detail that seals the gaps between the fender and the body, preventing water and dirt from entering the chassis. It is made from a compressible EPDM rubber that maintains its sealing properties over a wide temperature range.
All fasteners are supplied in the correct grades and quantities. The cross‑recessed pan head tapping screws are ideal for securing the plastic linings, while the hexagon head bolts, big washers, spring washers, and hexagon nuts provide a robust, vibration‑proof fastening for the fenders.
The spring washers are particularly important in the Rear fender assembly, as they provide a locking action that prevents the bolts from loosening under the severe vibration characteristic of dump truck operation. The big washers ensure that the load is distributed evenly, preventing damage to the fender material.
Replacing the entire Rear fender kit is a proactive maintenance step that can prevent rust and corrosion from spreading to the chassis. Over time, damaged fenders can allow moisture to reach the frame rails, leading to structural issues. Our kit provides a comprehensive solution that addresses all potential failure points.
Installation is straightforward and can be completed with basic hand tools. The old fenders are removed, the mounting surfaces are cleaned, and the new fenders are attached using the supplied hardware. The lining and cushion are installed before the fender is finally tightened.
For fleet operators, standardising on this genuine Rear fender kit ensures consistent quality and appearance across all trucks. The durable materials reduce the need for frequent replacements, lowering the total cost of ownership.
We recommend that the Rear fender be inspected regularly for signs of damage or loose fasteners. A cracked or corroded fender should be replaced immediately to prevent further damage to the vehicle.
We back our Rear fender kit with a 12‑month warranty against manufacturing defects. Our technical support team is available to assist with any installation or compatibility questions.
We ship worldwide with tracking. Expedited shipping is available for urgent orders. Use the Send Email or Get Quotation buttons to request a customised quote for your fleet.
Choosing a genuine Rear fender kit ensures that your HOWO 7 maintains its original appearance and protection standards. Aftermarket fenders may not have the same fitment or corrosion resistance, leading to premature failure.
The gasket and cushion lining are often overlooked, but they play a crucial role in reducing noise and preventing wear. Our kit includes all these components, ensuring a complete and thorough repair.
The cross‑recessed pan head tapping screws are made from stainless steel, providing excellent corrosion resistance and ensuring that they can be removed easily if the lining needs to be replaced.
We are committed to providing the highest quality components and exceptional customer service. Choose our Rear fender kit for peace of mind.
Don’t compromise on wheel area protection. Replace your damaged or corroded fenders with our genuine kit and enjoy the confidence that comes with a fully tested, factory‑fresh Rear fender system.
We maintain a large stock to ensure fast dispatch, even for bulk orders. Contact our sales team for volume pricing and customised logistics solutions.
Thank you for considering our Rear fender kit for your HOWO 7 dump truck. We are confident that our genuine OEM product will deliver the reliability and performance you expect from Sinotruk.
The Rear fender is a vital component for protecting the vehicle’s rear wheel area and maintaining its appearance. Investing in genuine parts ensures that your truck remains in top condition, both functionally and aesthetically.
We provide a comprehensive installation guide with torque specifications and clear diagrams. The kit is designed for easy replacement, with all components clearly labelled for identification.
We are committed to helping you maintain your HOWO 7 in peak condition. Our technical helpline is staffed by engineers with deep knowledge of the body and chassis systems.
With proper installation and regular inspection, this Rear fender kit will provide years of dependable service, keeping your wheel area clean and protected.
Upgrade your HOWO 7 with the genuine Rear fender kit – the smart choice for reliability, protection, and long‑term value.
We are proud to be a trusted supplier of OEM Sinotruk parts. Contact us today to order your Rear fender kit and experience the quality that only genuine components can deliver.
Don’t wait until a damaged fender compromises your truck’s appearance or leads to rust. Replace your aging components with our genuine kit and enjoy the peace of mind that comes with a fully tested, factory‑fresh solution.
We are here to support your fleet’s needs with fast shipping and competitive pricing. Use the buttons above to request a quote or place your order.
The Rear fender is an essential part of your truck’s body protection. Choose genuine Sinotruk parts for the best results.
We are confident that our genuine Rear fender kit will exceed your expectations. Order today and keep your HOWO 7 protected and looking its best.
We are proud to offer this high‑quality Rear fender kit, which includes every component needed for a complete rear wheel area protection overhaul. It is the most comprehensive solution available for the HOWO 7 dump truck.
Our Rear fender components are built to meet the highest standards of quality and durability. You can trust them to perform when you need them most.
We look forward to serving your HOWO 7 needs. Thank you for choosing our genuine parts for your vehicle.
We are committed to providing the best service and quality. Trust our Rear fender kit to deliver the performance you expect.
Order now and ensure your truck is equipped with the best rear fender protection available. We are here to support you every step of the way.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
