| No. | Part No. | Name |
|---|---|---|
| 1 | WG9725931034 | Front bracket assembly of bumper |
| 2 | WG9725930837 | Front anti-drilling bracket pull plate assembly |
| 3 | WG1642242101 | Model 10 HOWO high-position bumper assembly |
| 4 | WG1642242103 | Lower left pedal |
| 5 | WG1642240113 | Antiskid plate |
| 6 | WG9725930179 | cap |
| 7 | WG9725931088 | Right reinforced bracket of bumper |
| 8 | WG9725930710 | Support plate |
| 9 | WG1642242104 | Lower right pedal |
| 10 | WG1642241024 | Right blanking cap |
| 11 | WG1642241023 | Left blanking cap |
| 12 | AZ9925930036 | Towing hook assembly |
| 13 | WG9725931060 | Front suspension stabilizer bar |
| 14 | WG1642242105 | Bumper trim mesh |
| 15 | WG9725931001 | Pedal bracket assembly (HOWO 10 front-face high-bumper) |
| 16 | WG9725930524 | Right front towing hook base |
| 17 | AZ1664240062 | License bracket assembly |
| 18 | Q151B1660 | Hexagon head bolt |
| 19 | 190004071085 | Self-locking nut |
| 20 | Q151B1445 | Hexagon head bolt |
| 21 | Q150B1035 | Hexagon head bolt |
| 22 | Q33210 | Type 2 all-metal hexagonal lock nut |
| 23 | Q40210 | Spring washer |
| 24 | Q40210 | Big washer |
| 25 | ZQ1840825 | Hexagon bolt with flange M8 |
| 26 | ZQ32008 | Hexagon nut with flange |
| 27 | Q40006 | Small washer |
| 28 | WG1664930022 | Stainless steel cross-recessed countersunk head screw M8*25 |
| 29 | Q1811645 | Hexagon toothed bolt with flange bearing surface – Fine thread |
| 30 | WG9725931087 | Left reinforced bracket of bumper |
| 31 | Q1461025 | Hexagon head bolt, Spring washer and flat washer assembly |
The Front bracket assembly of bumper is a heavy‑duty steel mounting structure that attaches the main bumper to the chassis frame. It provides the primary load‑bearing support for the bumper assembly and ensures correct alignment with the vehicle’s front structure.
This pull plate assembly reinforces the lower front section, preventing the bumper from being pushed upward during off‑road operation. It also provides a mounting point for the anti‑drilling guard, enhancing protection for the radiator and engine bay.
The Model 10 HOWO high-position bumper assembly is the main exterior component, featuring a robust steel construction and a high‑clearance design. It incorporates mounting points for the grille, lamps, and tow hooks, and is finished with a durable powder coat that resists corrosion and stone chips.
The Lower left pedal is a sturdy step plate mounted on the left side of the bumper, providing a secure foothold for accessing the engine bay or cleaning the windshield. Its non‑slip surface ensures safe footing in wet or muddy conditions.
The Antiskid plate is a perforated steel sheet mounted on the top of the bumper, providing a slip‑resistant surface for stepping or resting tools. Its open design also allows water and debris to drain away, reducing corrosion.
The cap is a protective cover that fits over exposed ends of the bumper or mounting brackets, providing a clean appearance and preventing debris from entering the internal structure. It is made from UV‑stabilised plastic for long‑term durability.
The Right reinforced bracket of bumper is a heavy‑gauge steel component that adds lateral stiffness to the passenger side of the bumper. It helps absorb impact forces and maintains the bumper’s shape during collisions.
The Support plate is a flat steel brace used to reinforce the bumper mounting points, distributing loads evenly across the chassis. Multiple plates are used to ensure that the bumper assembly remains securely attached.
Symmetrical to the left pedal, the Lower right pedal provides a similar stepping surface on the passenger side, improving accessibility and safety during routine maintenance.
The Right blanking cap is a cosmetic cover that fills the opening on the right side of the bumper when no tow hook or accessory is installed, maintaining a smooth, factory‑finished look.
The Left blanking cap is the mirror‑image cover for the left side, providing identical protection and appearance benefits. Both caps are interchangeable for ease of service.
The Towing hook assembly is a forged steel recovery point bolted to the chassis, enabling the vehicle to be safely towed or to pull other vehicles. It is rated for heavy loads and features a corrosion‑resistant finish.
The Front suspension stabilizer bar is a torsion‑type anti‑roll bar that reduces body lean during cornering. It is mounted to the bumper assembly and connects to the suspension arms, improving handling and stability.
The Bumper trim mesh is a decorative grille insert that fills the lower opening of the bumper, adding a modern styling element while allowing airflow to the radiator. It is made from impact‑resistant polymer.
This bracket assembly supports the lower pedals and provides structural reinforcement for the high‑position bumper. It is designed specifically for the HOWO 10 front‑face configuration, ensuring a perfect fit.
The Right front towing hook base is the mounting plate that secures the towing hook to the chassis on the right side. It is made from high‑tensile steel and is drilled to match the hook’s bolt pattern.
The License bracket assembly provides a secure mounting point for the front license plate, positioned centrally on the bumper. It includes pre‑drilled holes and rubber grommets to prevent rattling.
The Hexagon head bolt is a general‑purpose fastener used throughout the bumper assembly for attaching brackets, pedals, and covers. Its hexagonal head allows for easy tightening with standard wrenches, and it is available in various lengths to suit different mounting depths.
The Self-locking nut features a nylon insert that creates a prevailing‑torque locking action, preventing loosening under vibration. It is used on critical fasteners within the bumper assembly to ensure long‑term reliability.
This all‑metal lock nut offers a higher locking torque than standard nuts, providing excellent resistance to loosening in high‑vibration environments. Its all‑metal construction makes it suitable for high‑temperature applications.
The Spring washer is a split‑ring lock washer that provides a tension force to prevent the fastener from backing out. It is used in conjunction with bolts and nuts to maintain clamping pressure.
The Big washer is a large‑diameter flat washer that distributes the load over a wider area, preventing damage to soft materials and providing a stable clamping surface. It is used under bolt heads and nuts in the bumper assembly.
The Hexagon bolt with flange M8 features an integrated flange that eliminates the need for a separate washer, simplifying assembly. It is used for attaching lightweight components and trim pieces.
The Hexagon nut with flange is a flanged nut that provides a wide bearing surface and eliminates the need for a washer. It is used with flange bolts to create a secure, vibration‑proof joint.
The Small washer is a compact flat washer used in confined spaces where a larger washer would not fit. It provides adequate load distribution for lighter fasteners.
This stainless steel countersunk screw provides a flush, corrosion‑resistant fastening for trim panels and covers. Its cross‑recessed head allows for easy installation with a screwdriver, and the stainless steel material ensures long‑term rust protection.
This fine‑thread bolt features a toothed flange that bites into the mating surface, providing a positive locking action. It is used in critical structural connections where high clamping force and vibration resistance are required.
The Left reinforced bracket of bumper is the driver‑side counterpart to the right bracket, providing symmetrical reinforcement and ensuring that the bumper maintains its alignment and strength under load.
This pre‑assembled fastener includes a hexagon head bolt, a spring washer, and a flat washer, ready for installation. It simplifies assembly and ensures that the correct combination of washers is used for optimal clamping performance.
Our bumper assembly is manufactured to Sinotruk’s original specifications, guaranteeing a perfect fit on the HOWO 7 6×4 chassis. Every bracket and panel aligns with the factory mounting points, ensuring seamless installation and original‑grade protection.
The bumper assembly provides robust impact protection for the radiator, engine, and cab. The reinforced brackets and stabilizer bar work together to absorb energy in a collision, minimising damage and enhancing occupant safety.
We supply every bracket, pedal, mesh, tow hook, and fastener needed for a full bumper assembly replacement. No additional parts are required, saving you time and ensuring a thorough, professional repair.
All metal components are treated with anti‑corrosion coatings, and the stainless steel screws provide long‑term rust protection. The bumper assembly is built to withstand the harsh conditions of off‑road and construction site operations.
The bumper assembly is the first line of defence for your HOWO 7 dump truck, protecting the front end from impacts, debris, and environmental damage. This comprehensive kit replaces or upgrades every component of the front bumper system, ensuring that your vehicle meets both safety and styling standards.
The high‑position bumper design provides increased ground clearance, allowing the truck to navigate rough terrain without the bumper dragging or catching on obstacles. This is particularly important for dump trucks that operate in quarries, mines, and construction sites.
The front bracket assembly and reinforced brackets are manufactured from high‑strength steel, providing a rigid structure that distributes impact forces across the chassis. The support plates and stabilizer bar add additional rigidity, reducing chassis flex during cornering and heavy braking.
The lower left and right pedals are ergonomically designed to provide a secure stepping surface, making it easier to access the cab or work on the engine. The antiskid plates ensure that footing remains sure even in wet or oily conditions, enhancing safety for the driver and maintenance personnel.
The towing hook assembly and right front towing hook base are rated for heavy‑duty recovery operations, with a working load limit that exceeds the vehicle’s gross weight. The forged steel hook is corrosion‑resistant and can be used with standard shackles and tow ropes.
The bumper trim mesh adds a modern aesthetic while protecting the radiator from large debris. Its open design allows maximum airflow, ensuring efficient engine cooling even under heavy load.
All fasteners are supplied in the correct grades and quantities. The hexagon head bolts, self‑locking nuts, and all‑metal lock nuts are selected for their resistance to vibration and corrosion. The spring washers and big washers ensure that every joint remains tight and secure over the vehicle’s lifetime.
Installation of the bumper assembly is straightforward with the provided hardware. The brackets bolt directly to the existing chassis holes, and the bumper is aligned using the support plates. The pedals and trim mesh snap or screw into place, and the tow hook is secured with the heavy‑duty bolts.
For fleet operators, standardising on this genuine bumper assembly ensures consistent quality and appearance across all trucks. The robust construction reduces the need for frequent replacements, lowering total cost of ownership.
The license bracket assembly is pre‑drilled to accept standard license plates, and its rubber grommets prevent rattling. The blanking caps fill the unused tow hook openings, giving the bumper a clean, finished look.
We recommend that the bumper assembly be inspected regularly for signs of damage or loose fasteners. Cracks or bent components should be replaced immediately to maintain structural integrity and safety.
We back our bumper assembly with a 12‑month warranty against manufacturing defects. Our technical support team is available to assist with any installation or compatibility questions.
We ship worldwide with tracking. Expedited shipping is available for urgent orders. Use the Send Email or Get Quotation buttons to request a customised quote for your fleet.
Choosing a genuine bumper assembly ensures that your HOWO 7 maintains its original front‑end protection and appearance. Aftermarket alternatives may not have the same fitment, strength, or corrosion resistance.
The front suspension stabilizer bar is a valuable addition that improves handling, especially when the truck is heavily loaded. It reduces body roll, providing a more stable and predictable driving experience.
The stainless steel countersunk screws used for the trim mesh and blanking caps are rust‑proof, maintaining a clean appearance even after years of exposure to the elements.
We are committed to providing the highest quality components and exceptional customer service. Choose our bumper assembly for peace of mind.
Don’t compromise on front‑end protection. Replace your damaged or worn bumper with our genuine kit and enjoy the confidence that comes with a fully tested, factory‑fresh bumper assembly.
We maintain a large stock to ensure fast dispatch, even for bulk orders. Contact our sales team for volume pricing and customised logistics solutions.
Thank you for considering our bumper assembly for your HOWO 7 dump truck. We are confident that our genuine OEM product will deliver the reliability and performance you expect from Sinotruk.
The bumper assembly is a crucial safety and styling component of your truck. Investing in genuine parts ensures that your vehicle remains compliant, safe, and visually appealing for the long term.
We provide a comprehensive installation guide with torque specifications and clear diagrams. The kit is designed for easy replacement, with all components clearly labelled for identification.
We are committed to helping you maintain your HOWO 7 in peak condition. Our technical helpline is staffed by engineers with deep knowledge of the chassis and body systems.
With proper installation and regular inspection, this bumper assembly will provide years of dependable service, protecting your truck’s front end from damage.
Upgrade your HOWO 7 with the genuine bumper assembly – the smart choice for protection, durability, and long‑term value.
We are proud to be a trusted supplier of OEM Sinotruk parts. Contact us today to order your bumper assembly and experience the quality that only genuine components can deliver.
Don’t wait until a damaged bumper compromises your truck’s safety and appearance. Replace your aging components with our genuine kit and enjoy the peace of mind that comes with a fully tested, factory‑fresh solution.
We are here to support your fleet’s needs with fast shipping and competitive pricing. Use the buttons above to request a quote or place your order.
The bumper assembly is an essential part of your truck’s frontal protection system. Choose genuine Sinotruk parts for the best results.
We are confident that our genuine bumper assembly will exceed your expectations. Order today and keep your HOWO 7 protected and looking its best.
We are proud to offer this high‑quality bumper assembly kit, which includes every component needed for a complete front‑end refurbishment. It is the most comprehensive solution available for the HOWO 7 dump truck.
Our bumper assembly components are built to meet the highest standards of quality and durability. You can trust them to perform when you need them most.
We look forward to serving your HOWO 7 needs. Thank you for choosing our genuine parts for your vehicle.
We are committed to providing the best service and quality. Trust our bumper assembly to deliver the performance you expect.
Order now and ensure your truck is equipped with the best front bumper system available. We are here to support you every step of the way.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
