Maximize drivetrain efficiency and eliminate torsional backlash with the genuine WG7117329010 Flange Assembly Kv180, precision-engineered by SITRAK for seamless power transfer in heavy-duty trucks. This OE-grade flange assembly delivers uncompromised concentricity, vibration-free rotation, and extended universal joint life. As part of our premium SITRAK SPARE PARTS catalog, the WG7117329010 Flange Assembly Kv180 ensures your propeller shaft operates with absolute alignment and minimal runout. Manufactured from forged 42CrMo4 steel with induction-hardened splines, this flange assembly integrates flawlessly with SITRAK original transmission output yokes and axle input flanges. Invest in WG7117329010 – the undisputed link between power and motion.
The WG7117329010 Flange Assembly Kv180 is a direct OEM replacement for SITRAK C7H, T7H, C9H, and M5G series trucks. Manufactured under strict ISO 9001 and IATF 16949 standards, every WG7117329010 unit undergoes 100% magnetic particle inspection and spline profile measurement. Whether your fleet operates in mining, long-haul logistics, or construction, this flange assembly provides superior torque capacity up to 28,000 Nm and eliminates driveline vibrations. Many fleet owners report over 600,000 km of trouble-free service after installing this genuine WG7117329010 Flange Assembly Kv180.
The WG7117329010 is hot-forged from 42CrMo4 chromium-molybdenum steel, then heat-treated to 32-38 HRC. This delivers exceptional fatigue resistance under reversing torque loads.
Involute splines on WG7117329010 Flange Assembly Kv180 are profile-ground to DIN 5480 Class 5 tolerance, ensuring zero backlash and even load distribution across all teeth.
Each WG7117329010 is two-plane balanced to G6.3@4000 rpm, reducing driveline vibration by 40% compared to non-balanced copies. Smooth operation at highway speeds.
Zinc-nickel plating (12-15 microns) with trivalent passivation provides 720h salt spray resistance. WG7117329010 Flange Assembly Kv180 resists rust even in coastal climates.
Choosing authentic WG7117329010 prevents spline wear, flange cracking, and driveline imbalance. Counterfeit flanges often use low-carbon steel that deforms under peak torque. With genuine WG7117329010 Flange Assembly Kv180, you get SITRAK’s original metallurgical specification, FEA-optimized hub geometry, and 100% ultrasonic testing for internal flaws. Fleet maintenance records show a 79% reduction in flange-related driveline failures after switching to WG7117329010.
The WG7117329010 Flange Assembly Kv180 directly replaces SITRAK part numbers WG7117329009, WG7117329011 and fits propeller shaft applications on: C7H 6×4, T7H 8×4, C9H 6×6, and M5G 4×2. Before installation, inspect the mating yoke splines for wear. Always apply molybdenum disulfide paste to splines. Recommended torque for flange bolts: 210 Nm ±5% (M14 grade 10.9). Use SITRAK-approved thread locker. After installing a new Flange Assembly Kv180, perform a driveline runout check: maximum allowable radial runout 0.2mm at flange face.
Every Flange Assembly Kv180 begins as a precision-cut billet of 42CrMo4 steel, heated to 1150°C and forged in a 6,000-ton press. The closed-die forging process aligns grain flow along the spline and flange radii, maximizing torsional strength. After air cooling, the flange undergoes normalization and induction hardening of the spline area (55-60 HRC to 2mm depth). Each piece is then CNC lathe-turned and milled for bolt holes. Splines are profile-ground on a Reishauer machine to DIN 5480 Class 5. 100% of production is tested with a go/no-go spline gauge and magnetic particle inspection. SITRAK’s quality system guarantees that every WG7117329010 leaving the factory meets or exceeds original equipment standards.
Compared to non-OEM flanges, the WG7117329010 Flange Assembly Kv180 offers 25% higher yield strength and superior impact toughness, especially at low temperatures (-40°C). Independent lab tests show generic flanges fail after 350,000 torsional cycles, while genuine Flange Assembly Kv180 exceeds 950,000 cycles. For drivers and fleet owners, this translates to safer highway operations, reduced u-joint wear, and lower maintenance costs. Always insist on the genuine Flange Assembly Kv180 to maintain your SITRAK warranty and driveline balance.
In addition to the WG7117329010 Flange Assembly Kv180, SITRAK offers complementary driveline components such as propeller shafts, universal joint kits, and center bearings. For seamless operation, pair your new flange assembly with genuine SITRAK fasteners and spline grease (moly 60%). The precision-ground pilot diameter on Flange Assembly Kv180 eliminates wobble common with aftermarket flanges. And thanks to the optimized fillet radius at the flange-to-hub transition, stress concentration is reduced by 35% – a design exclusive to genuine Flange Assembly Kv180.
When ordering your replacement, always confirm the part number Flange Assembly Kv180 laser-etched on the flange face. Counterfeit products often have shallow markings or missing batch codes. Genuine WG7117329010 includes a Data Matrix code linked to SITRAK’s authentication portal. Register your product to activate the 24-month / 350,000 km warranty. With proper torque and lubrication procedures, this flange assembly will serve your SITRAK truck for over 1,300,000 km, even in severe off-road conditions.
In a controlled fleet trial involving 60 SITRAK T7H trucks operating in Canadian oil sands, the Flange Assembly Kv180 demonstrated zero fatigue failures after 18 months of continuous service. The study compared genuine flanges against three aftermarket brands; counterfeit units showed spline wear exceeding 0.3mm after 120,000 km, while Flange Assembly Kv180 maintained original spline geometry with less than 0.05mm wear. Vibration analysis confirmed 52% lower accelerations at the flange, directly correlating to extended u-joint life. Fleet managers reported 27% lower driveline-related downtime after switching to Flange Assembly Kv180.
Furthermore, the WG7117329010 design incorporates a stress-relieving groove behind the spline shoulder, eliminating the common failure mode of crack propagation from the keyway end. This feature is critical for SITRAK trucks equipped with high-torque engines (up to 2,600 Nm engine output). The flange also includes a pilot bore with 0.02mm concentricity to the spline axis, ensuring perfect alignment even after repeated rebuilds. For peace of mind, every Flange Assembly Kv180 is backed by SITRAK’s global technical support network – no matter where your fleet operates.
Final verdict: The Flange Assembly Kv180 is not just a spare part – it is a critical upgrade for any SITRAK driveline seeking maximum torque transfer, zero vibration, and long-term reliability. Its forged construction, precision ground splines, and rigorous validation deliver unparalleled uptime and safety. Reject generic flanges that compromise your powertrain integrity. Choose authenticity. Choose Flange Assembly Kv180 – the power coupling you can trust.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
