VG1540080030 is a premium complete fuel fine filter assembly (Euro III) engineered specifically for Howo/Sitrak truck parts compatibility. This factory‑spec filter module delivers ultra‑clean fuel supply, protecting injectors and pumps from premature wear. With rigorous OEM standards, the VG1540080030 assembly ensures your Euro III engine runs smoother, longer, and with lower emissions. Built for heavy‑duty cycles, it withstands extreme pressure and temperature variations.
The VG1540080030 complete fuel fine filter assembly (Euro III) is not just a filter — it is a high‑performance fuel management component. Every unit is pressure‑tested and manufactured with multi‑layer micro‑glass media that captures particles down to 4 microns. Water separation efficiency exceeds 95%, safeguarding your fuel system against corrosion and bacterial growth.
| Parameter | Value / specification |
|---|---|
| OEM Number | VG1540080030 |
| Filtration efficiency | ≥ 98.5% @ 4 µm |
| Water separation | > 95% |
| Max flow rate | 180 L/h |
| Operating pressure | 0.8 – 3.5 bar |
| Fuel compatibility | Diesel / biodiesel B20 |
| Housing material | Aluminum + corrosion coating |
| Thread size | M16 x 1.5 |
| Height / Diameter | 182 mm / 92 mm |
| Euro standard | Euro III (III‑compliant) |
This complete fuel fine filter assembly (Euro III) is constructed with a robust die‑cast housing that resists vibration and corrosion. The internal bypass valve prevents pressure spikes, while the integrated drain allows quick water purging. Each unit is 100% leak‑tested before packaging, ensuring zero defects out of the box.
Fleet operators and owner‑drivers trust the VG1540080030 for its consistent performance across long‑haul routes. The filter element is pleated for maximum surface area, reducing the risk of clogging even with lower‑quality fuel. Change intervals are predictable, lowering total cost of ownership.
Replace the complete assembly every 40,000–50,000 km or annually. Always prime the filter with clean diesel before installing. Use a torque wrench set at 25 Nm for the mounting bolt. The water sensor port (optional) can be connected to an external warning light.
Generic filters often lack the correct bypass calibration or water‑separating media. The VG1540080030 is engineered to Howo’s exact Euro III specifications, providing superior dirt‑holding capacity and consistent fuel pressure. This directly translates to better throttle response, reduced smoke, and longer injector life.
In side‑by‑side tests, the complete fuel fine filter assembly (Euro III) showed 22% higher contaminant retention compared to aftermarket alternatives. The synthetic fiber blend resists degradation from additives and biofuels, ensuring performance remains stable over the entire service interval.
Euro III engines rely on precise fuel atomization. The VG1540080030 filter assembly delivers consistently clean fuel to the high‑pressure pump, reducing injector sticking and combustion chamber deposits. Operators report smoother idle and improved fuel economy by 3‑5% after installation.
The integrated water‑in‑fuel sensor port (optional) allows real‑time monitoring, preventing water damage to the injection system. This is particularly vital in humid climates or when fuel storage conditions are suboptimal. The housing is designed with a see‑through drain bowl for quick visual inspection.
Direct fit for Howo A7, Howo T7H, Sitrak C7H, Sitrak TGA, and all Euro III 10‑liter and 12‑liter engines. Also compatible with certain CNHTC heavy trucks using the same fuel system architecture. The mounting bracket and thread pattern match the original equipment, making replacement a 15‑minute job for any qualified mechanic.
The complete fuel fine filter assembly is 100% recyclable at end of life. The filter element can be incinerated for energy recovery, while the metal housing is fully recyclable. This aligns with sustainable fleet management goals without sacrificing performance.
Stock availability is consistent across major distribution centers. Each unit is individually boxed with protective caps to prevent contamination. When ordering, always verify the OEM number VG1540080030 to ensure you receive the correct Euro III variant.
Trusted by thousands of fleet owners – VG1540080030 is the benchmark for fuel filtration.
The complete fuel fine filter assembly with OEM number VG1540080030 is the definitive solution for Euro III trucks. The VG1540080030 ensures fuel cleanliness at every operating condition. Choose the VG1540080030 for unmatched engine protection.
For heavy haulage, construction, or long‑distance transport, the VG1540080030 complete fuel fine filter assembly (Euro III) delivers peace of mind. Its precision bypass valve and high‑capacity media make it a favourite among workshop technicians. The robust construction and easy serviceability reduce downtime.
Every component, from the seal ring to the central tube, is manufactured with tight tolerances. The VG1540080030 filter assembly undergoes a 16‑point inspection before leaving the factory. That is the level of quality that Howo and Sitrak owners expect.
24‑month warranty against manufacturing defects. The VG1540080030 is backed by technical support and a global network of partners. Install with confidence and experience the difference of genuine filtration.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
