The chassis shockup bracket upper is a critical component that ensures the proper mounting and alignment of your truck’s shock absorbers, directly impacting ride quality, handling stability, and overall vehicle safety. The WG9925680026 CHASSIS SHOCKUP BRACKET UPPER(HOWO) from HOWO is engineered to deliver exceptional structural rigidity, precise fitment, and long-lasting corrosion resistance, guaranteeing that your suspension system performs optimally under the most demanding conditions. As a vital Howo/Sitrak truck parts component, this bracket is manufactured from high‑strength steel with a durable zinc‑plated finish, featuring precision‑machined mounting holes and reinforced gussets that eliminate flex and ensure accurate shock absorber positioning. Whether you are replacing a worn or damaged bracket or performing a full chassis overhaul, the WG9925680026 guarantees a perfect OEM fit, unmatched durability, and reliable suspension performance – making it the trusted choice for professional workshops and fleet operators worldwide.
The upper shock absorber bracket is the primary interface between the shock absorber and the chassis frame. It must withstand continuous cyclic loading, road impacts, and torsional stresses while maintaining precise geometry. The WG9925680026 is specifically designed to provide a secure, rigid mounting point that allows the shock absorber to function efficiently, damping oscillations and maintaining tire contact with the road. A cracked, corroded, or misaligned bracket can lead to reduced damping effectiveness, uneven tire wear, poor handling, and even complete shock absorber failure. HOWO has engineered this bracket with a box‑section design and additional ribbing to maximize strength and stiffness, while the precision‑drilled holes ensure accurate alignment with the chassis and shock absorber mounting points. With the WG9925680026, you restore the original suspension geometry and ride quality, ensuring your HOWO truck delivers the stability and comfort that professional drivers expect.
Rigid Support
No Flex
Corrosion Guard
Zinc‑Plated
OEM Fit
Exact Match
Precision Holes
Accurate Alignment
Accurate engineering data ensures correct selection and installation. The WG9925680026 is manufactured to the strictest OEM tolerances, guaranteeing seamless integration with your HOWO chassis and suspension system.
| Parameter | Specification | Detail |
|---|---|---|
| OEM Number | WG9925680026 | Exact Match |
| Part Name | CHASSIS SHOCKUP BRACKET UPPER(HOWO) | Genuine HOWO |
| Brand | HOWO | Original Equipment |
| Application | HOWO T7H / A7 / Front or rear suspension | Upper shock mount |
| Material | High‑strength steel (Q345) | Zinc‑nickel plated |
| Bolt Hole Diameter | 14 mm (chassis side), 12 mm (shock side) | Precision drilled |
| Thickness (main plate) | 6 mm | Rigid |
| Gusset Reinforcement | Yes (both sides) | Enhanced strength |
| Surface Finish | Zinc‑nickel + passivation | Corrosion resistant |
| Weight | 1.8 kg | Substantial |
| Warranty | 12 Months | Manufacturer Guarantee |
The WG9925680026 is produced using a high‑precision stamping and welding process, ensuring consistent dimensional accuracy and structural integrity. The steel is first cut to shape, then formed with deep drawn ribs and strengthening beads that increase the bracket’s moment of inertia without adding unnecessary mass. The critical mounting holes are punched and reamed to exact tolerances, ensuring a precise fit with the factory bolts and shock absorber bushings. The bracket is then hot‑dip zinc‑nickel plated and passivated, providing a tough, corrosion‑resistant surface that withstands road salt, moisture, and stone chips. Each unit is inspected for flatness, hole alignment, and weld quality, guaranteeing that the WG9925680026 meets HOWO’s strict quality standards. This engineering excellence translates into a bracket that provides unwavering support for your shock absorbers, maintaining optimal suspension performance and ride comfort for the life of your vehicle.
The WG9925680026 is specifically designed for HOWO T7H and A7 trucks, as well as many Sinotruk models that share the same chassis and suspension architecture. It replaces the original upper shock absorber bracket on both front and rear axles, with identical mounting hole patterns and shock absorber alignment, ensuring a straightforward bolt‑on installation without modifications. The bracket is compatible with all original equipment shock absorbers and can also accommodate certain heavy‑duty aftermarket units.
To confirm fitment, always cross‑reference the OEM number on your existing bracket with WG9925680026. If they match, this component will integrate seamlessly. Keeping this bracket in your spare parts inventory enables rapid suspension repairs, minimising downtime and restoring your vehicle’s handling and ride quality.
HOWO T7H
Primary Fitment
HOWO A7
Also Compatible
Shock Mount
Upper Position
Direct Replacement
No Mods
Replacing a weakened or damaged upper shock bracket with the WG9925680026 immediately restores the structural integrity of the shock absorber mounting point. The rigid bracket ensures that the shock absorber can effectively dampen oscillations, reducing body roll, pitch, and dive during cornering, braking, and acceleration. This results in improved vehicle stability, more predictable handling, and enhanced driver confidence. The corrosion‑resistant finish also prevents the bracket from weakening over time, reducing the risk of sudden failure and extending the service life of the shock absorbers themselves. For fleet operators, a reliable upper bracket reduces suspension‑related downtime, improves tire life through better alignment, and enhances overall safety. By investing in the WG9925680026, you ensure that your HOWO truck delivers the ride quality and handling precision it was designed for, mile after mile.
Installing the WG9925680026 Upper Shockup Bracket is a straightforward procedure. Begin by safely supporting the vehicle and removing the shock absorber from the old bracket. Unbolt the bracket from the chassis using the appropriate socket and wrench. Clean the mounting surface on the frame, removing any rust or debris.
Position the new bracket onto the frame, aligning the holes with the original mounting points. Insert new high‑strength bolts and torque them to the manufacturer’s specification (typically 80–100 Nm for M14 bolts). Reinstall the shock absorber, ensuring the bushings are correctly seated and the mounting bolt is torqued to spec. After installation, lower the vehicle and test the suspension for proper operation. Periodically inspect the bracket for signs of corrosion or damage, and check the bolt torque during routine chassis maintenance. With correct installation, the WG9925680026 will provide years of dependable service.
Pro Tip: When replacing the upper bracket, it is recommended to also inspect the shock absorber bushings and replace them if worn. New bushings ensure a tight fit and prevent premature wear of the bracket and shock absorber. The WG9925680026 is designed to work with standard HOWO shock bushings; order genuine parts for optimal compatibility.
Genuine HOWO components are engineered to the highest standards, and the WG9925680026 Chassis Shockup Bracket Upper is no exception. Aftermarket brackets often use thinner steel, lack adequate reinforcement, or have inaccurate hole placement, leading to flex, misalignment, and premature failure. HOWO’s bracket is manufactured using the same materials and processes as the original equipment, guaranteeing a perfect fit and reliable performance.
By choosing the WG9925680026, you benefit from HOWO’s rigorous testing, including vibration, fatigue, and corrosion tests. This ensures that the bracket meets the demanding requirements of heavy‑duty trucking. Moreover, genuine parts are backed by a comprehensive warranty and supported by HOWO’s global network, giving you confidence in your purchase.
OEM Authentic
Factory Quality
Long Service
Extended Life
Global Standard
Trusted Worldwide
Q: Which vehicles use the WG9925680026?
A: It is designed for HOWO T7H and A7 trucks, as well as many Sinotruk models with the same chassis and suspension layout.
Q: What are the signs of a failing upper shock bracket?
A: Excessive vibration, unusual noises from the suspension, uneven tire wear, and visible cracks or corrosion around the mounting area are common indicators.
Q: Does the bracket come with mounting bolts?
A: The WG9925680026 includes the bracket only. We recommend using new high‑strength bolts for installation, which can be ordered separately if needed.
Q: How do I verify the correct part?
A: Check the OEM number stamped on your existing bracket. If it matches WG9925680026, this is the exact replacement. Consult your vehicle’s parts manual for additional confirmation.
Order your WG9925680026 Chassis Shockup Bracket Upper today! Explore our complete selection of genuine HOWO and Sinotruk suspension components at Howo/Sitrak truck parts and keep your suspension system rigid, reliable, and responsive.
The WG9925680026 Chassis Shockup Bracket Upper from HOWO is a testament to robust engineering and uncompromising quality. By choosing this genuine component, you ensure that your truck’s shock absorbers are securely and accurately mounted, delivering the handling, stability, and ride comfort that your HOWO truck was designed to provide. Whether you are a professional mechanic or a fleet manager, this bracket offers the strength, durability, and exact fit required for modern heavy‑duty trucks. Trust HOWO – the benchmark for excellence in heavy‑duty truck components – and experience the difference that genuine quality makes.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
