Clean fuel is the lifeblood of any high-performance diesel engine. The VG1560080013 HEAD FUEL FILTER from HOWO is engineered to remove microscopic contaminants, water, and particulates that can cause premature wear to injectors and pumps. As an essential Howo/Sitrak truck parts component, this filter head assembly integrates a high-efficiency media with a built-in water separator, delivering clean, dry fuel to the common-rail system. Its robust aluminum construction and precision sealing ensure leak-free operation even under extreme pressure and temperature fluctuations. Whether you are performing routine service or replacing a clogged unit, the VG1560080013 guarantees maximum contaminant removal, extended injector life, and consistent engine power – making it the trusted choice for workshops and fleet operators worldwide.
The VG1560080013 Head Fuel Filter serves as the primary defense against fuel-borne impurities. Its advanced filtration media captures particles as small as 4 microns, while the integrated water separator coalesces and retains moisture that can rust injector components and promote bacterial growth. HOWO has designed this filter head with a spiral-flow inlet that enhances water separation efficiency, ensuring that only clean, dry fuel reaches the high-pressure pump. A faulty or clogged filter can lead to injector sticking, power loss, and costly repairs. With the VG1560080013, you maintain optimal fuel cleanliness, preserving engine performance and reducing emissions.
4-Micron Media
Superior Capture
Water Separator
Dry Fuel
OEM Grade
Genuine HOWO
Leak-Free
Precision Sealing
Accurate specifications ensure correct application and optimal performance. The VG1560080013 is built to exacting OEM standards, providing a direct replacement for your HOWO fuel system.
| Parameter | Specification | Detail |
|---|---|---|
| OEM Number | VG1560080013 | Exact Match |
| Part Name | HEAD FUEL FILTER | HOWO Genuine |
| Brand | HOWO | Original Equipment |
| Application | HOWO T7H / A7 / MC11/MC13 | Fuel filter head assembly |
| Filtration Rating | 4 microns (absolute) | High efficiency |
| Water Separation | >95% efficiency | Spiral-flow design |
| Inlet/Outlet Ports | M16 x 1.5 (swivel) | Quick-connect fittings |
| Max Pressure | 10 bar (145 psi) | Common-rail ready |
| Material | Aluminum body / steel insert | Corrosion resistant |
| Operating Temp | -30°C to +120°C | Wide range |
| Warranty | 12 Months | Manufacturer Guarantee |
The VG1560080013 is engineered with a multi-layer synthetic media that provides high dirt-holding capacity while maintaining low flow restriction. The outer layer captures large debris, while the inner layers trap fine particulates down to 4 microns. The integrated water separator uses a coalescing element that forces water droplets to merge and settle at the bottom of the filter bowl, where they can be drained manually or via a sensor.
The aluminum head is precision-cast and machined to ensure flat sealing surfaces and accurate port alignment. The integral bypass valve protects the engine from fuel starvation in case of extreme clogging, while the primer pump (if equipped) facilitates easy priming after filter changes. Each VG1560080013 is flow-tested and pressure-cycled to verify durability, ensuring that it meets HOWO’s stringent quality standards. This meticulous engineering translates into a filter head that delivers consistent, reliable fuel conditioning over extended service intervals.
The VG1560080013 is specifically designed for HOWO heavy-duty trucks with MC11 and MC13 engines, commonly fitted in T7H, A7, and similar models. It mounts directly to the chassis or engine bracket, replacing the original fuel filter head assembly. The port orientation and electrical connections (if applicable) match the factory layout, allowing for a straightforward swap using basic hand tools.
This filter head is also compatible with many Sinotruk and other commercial vehicles that share the same fuel system design. To confirm fitment, always verify the OEM number on your existing assembly. If it matches VG1560080013, this component will integrate seamlessly. Keeping this filter head in your inventory ensures you can respond quickly to fuel contamination issues, reducing downtime and protecting your injection system.
HOWO T7H
Primary Fitment
HOWO A7
Also Compatible
Fuel System
Direct Mount
Direct Replacement
No Adaptations
Installing the VG1560080013 ensures that your fuel system receives the cleanest possible fuel. The high-efficiency media reduces injector wear, maintains consistent spray patterns, and prevents sticking – all of which contribute to optimal combustion and maximum power output. The water separator protects against corrosion and microbial growth, extending the life of the entire fuel system.
The robust construction and precise sealing eliminate the risk of air ingress, which can cause hard starting and rough idling. Fleet operators will appreciate the extended service intervals and reduced incidence of fuel-related breakdowns. By investing in the VG1560080013, you safeguard your engine’s performance and reliability, mile after mile.
Replacing the VG1560080013 Head Fuel Filter is a straightforward process. Begin by relieving fuel system pressure and placing a catch pan under the filter. Disconnect the inlet and outlet fuel lines, noting their positions. Remove the mounting bolts and carefully lift the old assembly.
Clean the mounting area and transfer any reusable sensors or fittings to the new filter head. Lubricate the O-rings with clean diesel fuel and install the new assembly, torquing the mounting bolts to specification. Reconnect the fuel lines, ensuring they are secure. Prime the fuel system using the manual primer pump (if available) and start the engine, checking for leaks. Bleed any air from the system as per the vehicle’s manual. For optimal performance, replace the filter element at recommended intervals and regularly drain water from the separator. With correct care, the VG1560080013 will provide years of dependable service.
Pro Tip: When installing a new filter head, always use genuine HOWO seals and O-rings. Aftermarket seals may not withstand the pressure and fuel chemistry, leading to leaks. The VG1560080013 comes with all necessary seals pre-installed for peace of mind.
Genuine HOWO components are engineered to the highest standards, and the VG1560080013 Head Fuel Filter is no exception. Aftermarket filter heads may use inferior media, imprecise porting, or weak sealing, leading to fuel contamination, leaks, and performance issues. HOWO’s filter head is manufactured using the same materials and processes as the original equipment, guaranteeing a perfect fit and reliable performance.
By choosing the VG1560080013, you benefit from HOWO’s extensive validation, which includes flow testing, pressure cycling, and contamination hold-up studies. This ensures that the filter head provides optimal filtration throughout its service life. Moreover, genuine parts are backed by a comprehensive warranty and supported by HOWO’s global network, giving you confidence in your purchase.
OEM Authentic
Factory Quality
Long Service
Extended Life
Global Standard
Trusted Worldwide
Q: Which vehicles use the VG1560080013?
A: It is used in HOWO T7H, A7, and other MC11/MC13 powered trucks, as well as many Sinotruk models with similar fuel systems.
Q: How often should I replace the filter element?
A: Typically every 20,000–30,000 km or as per the vehicle’s maintenance schedule. The VG1560080013 head allows easy element replacement.
Q: Does this filter head include a water-in-fuel sensor?
A: Some variants include a sensor port; check your original configuration. The VG1560080013 is available with or without sensor provision.
Q: How do I verify the correct part?
A: Check the OEM number on your existing filter head. If it matches VG1560080013, this is the exact replacement. You may also consult your vehicle’s parts manual.
Order your VG1560080013 Head Fuel Filter today! Browse our complete selection of genuine HOWO and Sinotruk fuel system components at Howo/Sitrak truck parts and keep your fuel system pristine.
The VG1560080013 Head Fuel Filter from HOWO is a testament to superior filtration and durable construction. By choosing this genuine component, you ensure that your engine receives the cleanest fuel possible, protecting your investment and maximizing performance. Whether you are a professional mechanic or a fleet manager, this filter head offers the reliability and efficiency required for modern heavy-duty diesel engines. Trust HOWO – the benchmark for excellence in heavy-duty truck components – and experience the difference that genuine quality makes.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
