The AZ400745410330 Shaft Seal is a precision‑engineered dynamic sealing component designed to prevent lubricant leakage and contamination ingress in rotating shaft applications. Manufactured from high‑grade fluoroelastomer (FKM) with a robust metal casing, this seal delivers exceptional resistance to high temperatures, pressure, and aggressive fluids, ensuring long‑term reliability in the most demanding driveline environments. As an essential part of genuine Howo/Sitrak truck parts, the AZ400745410330 is produced to exact OEM specifications, guaranteeing a perfect fit and superior sealing performance in HOWO, SITRAK, and SHACMAN transmissions, axles, and transfer cases. Whether you are replacing a worn seal during a routine service or performing a complete driveline overhaul, this shaft seal delivers the durability, flexibility, and chemical resistance required to maintain oil pressure, prevent leaks, and extend component life, reducing downtime and operational costs.
The AZ400745410330 is not a generic rubber ring; it is a precision‑engineered shaft seal that combines advanced elastomer technology with a robust metallic casing to provide reliable dynamic sealing under extreme operating conditions. The seal features a fluoroelastomer (FKM) lip that maintains constant contact with the rotating shaft, effectively preventing oil leakage while accommodating minor shaft runout and misalignment. The metal casing is precision‑stamped and coated with a corrosion‑resistant finish, ensuring a secure press‑fit into the housing bore and preventing leakage around the outer diameter.
The sealing lip is molded with a specially designed hydrodynamic ribbing pattern that enhances oil retention and reduces friction, even during high‑speed rotation. The integrated garter spring provides constant radial force to the lip, compensating for wear over time and maintaining a consistent seal. Every AZ400745410330 is dimensionally verified to meet the exact inside diameter, outside diameter, and width specifications required for its specific application, ensuring a precise fit that eliminates the risk of premature seal failure due to improper installation.
Extreme Temperature Resistance – The FKM elastomer of the AZ400745410330 withstands continuous operating temperatures from ‑40°C to +200°C, ensuring reliable sealing in both arctic cold and desert heat.
Chemical & Oil Resistance – The seal resists degradation from gear oils, transmission fluids, and hydraulic fluids, maintaining its sealing properties even after prolonged exposure.
Precision Dimensions – The ID, OD, and width are held to tight tolerances, ensuring a perfect press‑fit and eliminating leakage paths.
Thermal Stability – The metal casing and elastomer maintain their dimensions across a wide temperature range, preventing seal extrusion or hardening.
The AZ400745410330 shaft seal is dimensionally identical to the original equipment seal used in a wide range of HOWO, SITRAK, and SHACMAN transmissions, axle housings, and transfer cases. It is specifically designed for applications requiring a seal with an inner diameter of 85 mm, an outer diameter of 105 mm, and a width of 10 mm, matching the OEM specifications for many heavy‑duty driveline components. The seal’s precise dimensions ensure a drop‑in replacement that requires no modifications, reducing installation time and eliminating the risk of fitment errors.
By choosing this genuine OEM seal, you avoid the risks associated with aftermarket seals that may have incorrect dimensions, inferior rubber compounds, or inadequate spring tension, which can lead to premature leakage, oil contamination, and costly component failure. The AZ400745410330 has been validated through extensive testing in real‑world fleet operations, confirming its ability to maintain a leak‑free seal over hundreds of thousands of kilometers, even under high‑torque and high‑speed conditions.
Proper installation of the AZ400745410330 is critical to achieve a leak‑free seal and to avoid damaging the lip or the shaft surface. Begin by thoroughly cleaning the housing bore and the shaft to remove all dirt, old sealant, and burrs. Inspect the shaft for any scoring or wear; if the shaft is damaged, it must be repaired or replaced to ensure proper sealing. Apply a thin, even layer of clean oil or assembly lubricant to the outer diameter of the seal and the shaft surface to facilitate installation and prevent dry‑run damage.
Using a suitable installation tool or press, carefully install the seal squarely into the bore until it is fully seated against the stop or shoulder. Ensure the seal is not cocked, as this can cause lip distortion and leakage. After installation, rotate the shaft by hand to verify smooth operation and check for any signs of binding. Regular inspection of the AZ400745410330 during routine maintenance is recommended—look for signs of weeping, cracking, or hardening. With proper installation, this seal will provide reliable, long‑lasting sealing performance.
Each AZ400745410330 shaft seal is manufactured in an ISO 9001‑certified facility, ensuring the highest levels of quality and consistency. The FKM compound is sourced from approved suppliers and tested for hardness, tensile strength, and compression set. The metal casing is precision‑stamped and coated to prevent corrosion. After assembly, every seal is 100% visually inspected and dimensionally verified, including inner diameter, outer diameter, and width, using precision gauges and optical comparators.
Random samples from each batch are subjected to accelerated wear testing, high‑temperature exposure, and oil immersion tests to simulate years of service. A spring force test is also performed to confirm that the garter spring provides the correct radial load. This comprehensive quality assurance guarantees that every AZ400745410330 delivers the same reliable sealing performance as the original OEM component, giving you full confidence in your driveline repair.
Fleet maintenance teams and driveline specialists have come to trust the AZ400745410330 because it consistently eliminates oil leaks and ensures reliable driveline operation. The seal’s robust construction and precision fit mean that it can be installed with confidence, reducing the risk of premature failure. Many workshops report a significant reduction in transmission and axle leak complaints after switching to this genuine OEM seal.
Moreover, the AZ400745410330 is supplied in protective packaging to prevent damage during storage and handling. Its clear OEM number and application data simplify parts identification. When you choose this seal, you are selecting a component that has been engineered and tested to the highest standards, offering the perfect balance of sealing performance, durability, and value.
In summary, the AZ400745410330 Shaft Seal is a precision‑engineered sealing component that provides reliable, leak‑free containment for HOWO, SITRAK, and SHACMAN driveline applications. Its advanced FKM elastomer, robust metal casing, and exact OEM fitment ensure that it withstands the demands of heavy‑duty operation, protecting gears, bearings, and shafts from premature wear. By investing in this genuine replacement part, you are safeguarding your driveline from oil loss and contamination, extending component life and lowering overall maintenance costs.
Don’t compromise on sealing integrity – choose the AZ400745410330 for your next transmission or axle service. With its proven track record and widespread acceptance among professionals, this seal is the smart choice for anyone who values reliability, efficiency, and peace of mind. Keep your oil contained and your driveline running at its best with the AZ400745410330 – the definitive choice for HOWO and SITRAK professionals.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
