The 612630110070 O‑ring is a precision‑molded elastomeric seal that provides reliable, leak‑free fluid containment in critical engine and hydraulic applications. Manufactured from high‑grade synthetic rubber with exceptional resistance to oil, heat, and pressure, this O‑ring ensures a positive seal that prevents fluid loss and contamination ingress. As an essential component of genuine Howo/Sitrak truck parts, the 612630110070 is produced to exact OEM dimensions, guaranteeing a perfect fit and superior sealing performance in HOWO, Sitrak, and Shacman fuel systems, cooling circuits, and hydraulic components. Whether you are replacing a worn seal during routine maintenance or performing a complete system overhaul, this O‑ring delivers the durability, compressibility, and chemical resistance needed to maintain system integrity, prevent leaks, and extend component life, reducing downtime and maintenance costs.
The 612630110070 is not a generic rubber ring; it is a precision‑molded seal engineered to provide consistent compression and long‑term sealing performance. Manufactured from a specially formulated nitrile (NBR) or fluorocarbon (FKM) compound, depending on the application, this O‑ring offers excellent resistance to diesel fuel, engine oil, coolant, and hydraulic fluids. The material is carefully compounded to achieve the optimal balance of hardness (typically 70–90 Shore A), tensile strength, and compression set resistance. The ring is molded with a smooth, defect‑free surface and a precisely controlled cross‑sectional diameter, ensuring that it fills the gland completely and creates a reliable seal under both static and dynamic conditions.
The O‑ring’s design is based on the established principles of elastomeric sealing, where the ring is compressed between two mating surfaces to create a barrier against fluid passage. The 612630110070 is dimensionally verified to meet the exact inner diameter and cross‑section thickness required for its specific application, ensuring that it does not twist or deform during installation. Its high resilience allows it to accommodate minor surface irregularities and thermal expansion, maintaining a positive seal across a wide temperature range. Whether used in fuel injector return lines, oil cooler connections, or hydraulic valve bodies, this O‑ring provides dependable, long‑lasting sealing.
Fluid Compatibility – The 612630110070 is formulated to resist diesel, engine oil, coolant, and hydraulic fluids, maintaining its properties even after prolonged exposure.
Precision Dimensions – The inner diameter and cross‑section are held to tight tolerances, ensuring perfect gland fill and consistent seal compression.
High Resilience – The elastomer compound provides excellent recovery after compression, maintaining a tight seal over multiple thermal cycles.
Wide Temperature Range – Engineered to perform from ‑40°C to +120°C (NBR) or up to +200°C (FKM), this O‑ring suits diverse operating conditions.
The 612630110070 O‑ring is dimensionally identical to the original equipment seal used in a wide variety of HOWO, Sitrak, and Shacman applications. It is specifically designed for use in fuel injection system return lines, oil cooler housings, hydraulic control valve bodies, and coolant passage connections. The O‑ring’s inner diameter and cross‑section (e.g., ID × CS) match the gland dimensions of the mating components exactly, ensuring proper compression and sealing. By choosing this genuine component, you eliminate the risks associated with aftermarket O‑rings that may have incorrect dimensions, poor material quality, or inadequate hardness, which can lead to leaks, system contamination, or component seizure.
The 612630110070 has been validated through extensive engine and hydraulic system testing, confirming its ability to maintain a leak‑free seal under pressure pulsations, vibration, and thermal cycling. Fleets that have standardized on this O‑ring report a significant reduction in fluid leaks and associated maintenance costs. Its reliable sealing performance ensures that critical systems remain clean and operate at peak efficiency, reducing unplanned downtime.
Correct installation of the 612630110070 is essential to achieve a leak‑free seal and to avoid damaging the O‑ring or the mating components. Begin by thoroughly cleaning the gland and the sealing surfaces to remove any dirt, old sealant, or debris. Inspect the O‑ring for any visible defects, such as nicks, cuts, or distortion; if any are found, replace the ring. Apply a thin, even coat of the compatible fluid (e.g., engine oil or hydraulic fluid) to the O‑ring and the gland surfaces to facilitate installation and prevent damage. Carefully place the O‑ring into the gland, ensuring it is not twisted and sits evenly in the groove.
When assembling the mating components, apply steady, even pressure to compress the O‑ring without pinching or cutting it. Use a suitable assembly lubricant that is compatible with the O‑ring material. Tighten the fasteners to the manufacturer’s specified torque to achieve the correct compression. After assembly, run the system and check for any leaks. If a leak is detected, disassemble, inspect, and replace the O‑ring if necessary. Regular inspection of the 612630110070 during maintenance is recommended—look for signs of hardening, cracking, or permanent compression set. With proper installation and care, this O‑ring will provide reliable sealing for the life of the component.
Each 612630110070 O‑ring is manufactured in an ISO 9001‑certified facility with stringent process control. The raw material is sourced from approved suppliers and is tested for hardness, tensile strength, and compression set. The O‑rings are molded using precision‑engineered tooling, and every ring is 100% visually inspected for surface defects such as flash, blemishes, or contamination. The inner and outer diameters are measured using optical comparators to ensure they are within the specified tolerance.
Random samples from each batch are subjected to accelerated aging tests, including exposure to elevated temperatures and representative fluids, to verify that the O‑ring maintains its sealing properties over its service life. A compression set test is also performed to confirm that the ring recovers properly after compression. This rigorous quality assurance ensures that every 612630110070 delivers the same reliable, leak‑free performance as the original OEM component, giving you confidence in your repair.
Fleet maintenance teams and technicians have come to trust the 612630110070 because it eliminates the guesswork and fitment issues often encountered with generic O‑ring kits. Its consistent dimensions and material quality mean that it seals correctly the first time, reducing the need for rework. Many workshops have reported a significant decrease in fluid leak‑related callbacks after switching to this genuine O‑ring. Its availability in individually sealed packages ensures cleanliness and prevents contamination.
Furthermore, the 612630110070 is backed by a comprehensive quality warranty and is supported by our technical team. Its clear labeling and packaging make inventory management simple. When you choose this O‑ring, you are selecting a component that has been engineered and tested to the highest standards, offering the perfect balance of sealing performance, durability, and value.
In summary, the 612630110070 O‑ring is a precision‑engineered sealing component that provides reliable, leak‑free containment for HOWO, Sitrak, and Shacman fuel, oil, and hydraulic systems. Its high‑quality elastomer, exact dimensions, and rigorous quality assurance ensure that it maintains a positive seal under the most demanding operating conditions. By investing in this genuine replacement part, you are protecting your systems from fluid loss, contamination, and component wear, reducing downtime and maintenance costs.
Don’t settle for generic O‑rings that may compromise system integrity. Choose the 612630110070 for your next repair or rebuild. With its proven track record and widespread acceptance among professionals, this O‑ring is the smart choice for anyone who values reliability, efficiency, and peace of mind. Keep your fluids contained and your engine running at its best with the 612630110070 – the definitive choice for HOWO and Sitrak professionals.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
