The connecting rod is the vital link between the piston and the crankshaft, converting linear motion into rotational power with immense force. The 612600030042 Connecting Rod Assembly from HOWO is engineered to deliver exceptional strength, fatigue resistance, and a perfect factory fit, ensuring that your engine delivers maximum power while maintaining reliability under the most extreme loads. As a critical Howo/Sitrak truck parts component, this connecting rod assembly is manufactured from high-grade forged alloy steel, precision-machined and heat-treated to exacting tolerances, providing a robust, lightweight design that withstands the intense stresses of heavy-duty diesel combustion. Whether you are rebuilding an engine or replacing a worn rod, the 612600030042 guarantees factory-original specifications, superior fatigue life, and lasting reliability – making it the trusted choice for professional workshops and fleet operators worldwide.
The connecting rod assembly is one of the most highly stressed components in any internal combustion engine, bearing the full force of combustion and transmitting it to the crankshaft. The 612600030042 is specifically designed to meet the rigorous demands of HOWO heavy-duty diesel engines, offering exceptional tensile strength and fatigue resistance. A worn or failed connecting rod can lead to catastrophic engine failure, resulting in costly downtime and repairs. HOWO has engineered this connecting rod with a precision-forged I-beam section that optimises strength-to-weight ratio, reducing reciprocating mass while maintaining structural integrity. The large end and small end are precisely machined to ensure perfect fitment with the crankshaft journal and piston pin, and the rod is shot-peened and stress-relieved to eliminate micro-cracks and extend fatigue life. With the 612600030042, you restore the original engine balance and reliability, ensuring maximum power transfer and long-term durability.
High Strength
Forged Steel
Precision Balance
Matched Set
OEM Grade
Genuine HOWO
Fatigue Resistant
Shot-Peened
The 612600030042 connecting rod assembly is manufactured to the highest OEM standards, incorporating advanced materials and precision engineering. Below are the complete technical specifications for this essential engine component.
| Parameter | Specification | Detail |
|---|---|---|
| OEM Number | 612600030042 | Exact Match |
| Part Name | Connecting Rod Assembly | Genuine HOWO |
| Brand | HOWO | Original Equipment |
| Application | HOWO T7H / A7 / MC11/MC13 | Engine connecting rod |
| Material | Forged alloy steel (42CrMo4) | Heat-treated & shot-peened |
| Centre Distance | 219 mm | Precision ground |
| Big End Bore | 80 mm | With bearing shells |
| Small End Bore | 40 mm | Bushed |
| Weight | 2.8 kg | Matched set |
| Hardness | 28–34 HRC | Optimal toughness |
| Surface Finish | Phosphated + oiled | Corrosion protection |
| Warranty | 12 Months | Manufacturer Guarantee |
The 612600030042 connecting rod assembly is produced using a multi-stage manufacturing process that ensures exceptional quality and performance. The forging process aligns the grain flow of the steel, significantly increasing fatigue strength compared to cast or machined rods. After forging, the rod undergoes a controlled heat treatment process, including quenching and tempering, to achieve the optimal balance of hardness and ductility. The critical big-end and small-end bores are then precision-ground to exacting tolerances, ensuring perfect fitment with the crankshaft journal and piston pin. The rod is also shot-peened to induce compressive residual stresses on the surface, greatly improving resistance to crack initiation and propagation. Each rod is inspected for dimensional accuracy, hardness, and surface integrity, guaranteeing that the 612600030042 meets HOWO’s stringent quality standards. This meticulous engineering ensures that your connecting rods deliver consistent, reliable performance, handling the extreme forces of combustion with ease.
The 612600030042 connecting rod assembly is specifically designed for HOWO heavy-duty trucks equipped with MC11 and MC13 engine families, including T7H, A7, and derivative models. It directly replaces the original connecting rod with identical centre distance, bore sizes, and bolt specifications, ensuring a straightforward installation without modifications. The rod is compatible with all factory-specified pistons, crankshafts, and bearings, and it works seamlessly with the original oiling system. This connecting rod is also compatible with many Sinotruk and other commercial vehicles that share the same engine architecture. To confirm fitment, always cross-reference the OEM number on your existing rod with 612600030042. If they match, this component will integrate seamlessly. Keeping these rods in your spare parts inventory enables rapid engine overhauls, minimising downtime and preserving the performance and reliability of your engine.
HOWO T7H
Primary Fitment
HOWO A7
Also Compatible
MC11/MC13
Engine Series
Direct Replacement
No Modifications
Replacing worn or damaged connecting rods with the 612600030042 immediately restores the integrity and performance of your engine. The precision-ground bores and exact centre distance ensure proper piston placement and crankshaft alignment, reducing friction and improving power transfer. The shot-peened surface and premium alloy steel provide exceptional fatigue resistance, allowing the engine to handle higher power outputs and sustained heavy loads without failure. The reduced reciprocating mass (due to optimised design) also contributes to quicker engine response and reduced vibration. For fleet operators, reliable connecting rods reduce the risk of catastrophic engine failure, lower maintenance costs, and help maintain the performance and efficiency of your vehicles. By investing in the 612600030042, you ensure that your HOWO engine delivers the power, reliability, and durability that professional drivers and fleet managers depend on.
Installing the 612600030042 connecting rod assembly is a complex procedure that should be performed by a qualified engine builder with precision measuring tools. Begin by thoroughly cleaning the crankshaft journals and piston pins, and inspect them for wear or damage. Lubricate the new rod bearings and the piston pin with clean engine oil or assembly lube. Install the rod onto the crankshaft, ensuring that the bearing shells are correctly positioned and that the rod cap orientation matches the original markings. Torque the connecting rod bolts to the manufacturer’s specification using a torque wrench and angle gauge, following the correct sequence. Install the piston and secure the piston pin. Rotate the crankshaft to check for free movement and measure the oil clearance using plastigauge or a micrometer to ensure it is within specifications. Periodically monitor oil pressure and listen for any unusual knocking noises. With proper installation, the 612600030042 will provide years of reliable performance.
Pro Tip: When replacing connecting rods, it is recommended to replace all rods as a matched set to ensure consistent weight and balance. The 612600030042 is available individually; order the required quantity for a complete set to maintain engine balance and performance.
Genuine HOWO components are engineered to the highest standards, and the 612600030042 connecting rod assembly is no exception. Aftermarket rods often use inferior steel, inconsistent heat treatment, or imprecise dimensions, leading to premature failure, noise, and potential engine damage. HOWO’s rod is manufactured using the same materials and processes as the original equipment, guaranteeing a perfect fit and reliable performance. By choosing the 612600030042, you benefit from HOWO’s rigorous testing, including fatigue, wear, and corrosion resistance tests. This ensures that the connecting rod meets the demanding requirements of heavy-duty trucking. Moreover, genuine parts are backed by a comprehensive warranty and supported by HOWO’s global network, giving you confidence in your purchase.
OEM Authentic
Factory Quality
Long Service
Extended Life
Global Standard
Trusted Worldwide
Q: Which vehicles use the 612600030042 connecting rod assembly?
A: The 612600030042 is designed for HOWO T7H, A7, and other models with MC11/MC13 engines, as well as many Sinotruk trucks with the same engine architecture.
Q: What are the symptoms of a worn connecting rod?
A: Knocking or tapping noises from the engine (especially under load), low oil pressure, metallic particles in the oil, and reduced engine performance are common indicators.
Q: Can I replace just one connecting rod?
A: While it is possible, it is recommended to replace all connecting rods as a set to ensure consistent weight and balance. The 612600030042 is available individually; order the required quantity for a complete set.
Q: How do I verify the correct part?
A: Check the OEM number on your existing connecting rod. If it matches 612600030042, this is the exact replacement. Consult your vehicle’s parts manual for additional confirmation.
Order your 612600030042 Connecting Rod Assembly today! Explore our complete selection of genuine HOWO and Sinotruk engine components at Howo/Sitrak truck parts and keep your engine running smoothly and reliably.
The 612600030042 Connecting Rod Assembly from HOWO is a testament to precision engineering and uncompromising quality. By choosing this genuine component, you ensure that your engine’s connecting rods deliver the strength, reliability, and durability required for modern heavy-duty trucking. Whether you are a professional engine builder or a fleet manager, this connecting rod assembly offers the performance, reliability, and exact fit that you can count on. Trust HOWO – the benchmark for excellence in heavy-duty truck components – and experience the difference that genuine quality makes.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
