Maximize the efficiency of your auxiliary drive system with the 612600020424 Poly V Belt, a high‑performance multi‑ribbed belt engineered to deliver consistent, slip‑free power to your alternator, water pump, power steering pump, and A/C compressor. This belt features a specially formulated EPDM compound with advanced tensile cords that resist stretching and fatigue, providing exceptional durability and quiet operation. As a critical part of genuine Howo/Sitrak truck parts, the 612600020424 is manufactured to exact OEM specifications, guaranteeing a perfect fit and reliable performance in HOWO, Sitrak, and compatible heavy‑duty engines. Whether you are replacing a worn belt or performing preventive maintenance, this poly‑V belt delivers the grip, longevity, and reliability needed to keep your engine’s auxiliary systems running smoothly, reducing downtime and maintenance costs.
The 612600020424 is not a conventional V‑belt; it is a precision‑engineered poly‑V belt that uses multiple longitudinal ribs to provide superior grip and flexibility. The belt’s construction features a high‑strength polyester tensile cord that is helically wound and embedded in a specially formulated EPDM rubber compound. This combination delivers exceptional resistance to heat, ozone, and oil, while maintaining flexibility even at low temperatures. The ribs are precision‑molded to ensure perfect contact with the pulley grooves, distributing load evenly and eliminating slip. The belt’s smooth running surface reduces noise and vibration, making it ideal for modern diesel engines where quiet operation is essential.
The 612600020424 is designed to handle the high torque demands of heavy‑duty auxiliary systems, including high‑output alternators and hydraulic power steering pumps. Its tensile strength and fatigue resistance are optimized to withstand millions of flex cycles, ensuring long service life even under severe operating conditions. The belt’s dimensional stability ensures that it maintains correct tension over time, reducing the need for frequent adjustments and extending the life of pulleys and bearings.
Heat & Ozone Resistance – The EPDM compound of the 612600020424 resists cracking from heat and ozone, ensuring reliable performance in high‑temperature engine compartments.
Superior Grip – The multi‑rib design provides maximum contact area with pulleys, eliminating slip even under high loads and sudden acceleration.
Quiet Operation – The precision‑molded ribs and smooth back surface reduce noise, contributing to a quieter cab environment.
Extended Service Life – High‑strength tensile cords and advanced rubber compounding give the 612600020424 a significantly longer service life compared to standard belts.
The 612600020424 is dimensionally identical to the original equipment poly‑V belt used in HOWO, Sitrak, and Shacman heavy‑duty engines. It is specifically designed for the WP10, WP12, and WP13 series, as well as the WD615 engine family. The belt’s length, number of ribs, and profile exactly match the OEM specifications, ensuring proper tension and fitment on the serpentine drive system. By choosing this genuine component, you avoid the risks associated with aftermarket belts that may have incorrect length, improper rib profile, or inferior materials, which can lead to premature wear, noise, or even belt failure.
The 612600020424 has been validated through extensive dynamometer and field testing, confirming its ability to maintain proper tension and grip over thousands of hours. Fleets that have standardized on this belt report a significant reduction in belt‑related breakdowns and improved alternator and power steering performance. Its robust construction ensures that it withstands the demanding conditions of heavy‑haul and off‑road applications, reducing maintenance costs and downtime.
Installing the 612600020424 correctly is essential for achieving optimal performance and longevity. Before installation, inspect all pulleys for wear, debris, or damage; replace any worn pulleys to prevent premature belt wear. Release the tensioner and remove the old belt, noting the routing diagram. Clean the pulley grooves with a wire brush to remove any old rubber residue. Install the new 612600020424 by routing it over the pulleys according to the correct path, ensuring that the ribs seat fully in the grooves. Use a suitable tensioner tool to apply the proper tension, as specified by the engine manufacturer.
After installation, check the belt tension using a belt tension gauge; the correct tension for the 612600020424 is typically between 350 and 450 N (or as specified in the service manual). Run the engine and observe the belt for any unusual noise or vibration. Re‑check the tension after the first 100 hours of operation, as new belts may stretch slightly. Regular inspection of the belt for cracks, fraying, or glazing is recommended during routine maintenance. With proper installation and tension, the 612600020424 will provide reliable, trouble‑free service.
Each 612600020424 poly‑V belt is manufactured in an ISO 9001‑certified facility using state‑of‑the‑art extrusion and molding equipment. The raw materials, including EPDM rubber and high‑strength polyester cords, are sourced from approved suppliers and tested for quality and consistency. During production, the belt’s dimensions, rib profile, and tensile strength are monitored continuously. A 100% inspection of length, width, and rib geometry is performed after curing to ensure dimensional accuracy.
In addition to dimensional checks, random samples from each batch are subjected to tensile strength testing, fatigue cycling, and dynamic grip testing on a test rig. The belt is also exposed to elevated temperatures and ozone to simulate real‑world conditions. This thorough quality control ensures that every 612600020424 delivers the same outstanding performance and durability as the original OEM belt, giving you complete confidence in your repair.
Fleet maintenance teams and independent technicians alike have come to rely on the 612600020424 because of its consistent quality and reliable performance. The belt’s robust construction and precise fit eliminate the guesswork and time wasted on ill‑fitting aftermarket belts. Workshops report fewer comebacks due to belt noise or failure, and drivers appreciate the quiet, smooth operation. The extended service life of this belt means fewer roadside breakdowns and more productive uptime for fleets.
Furthermore, the 612600020424 is available with clear labeling and is packaged to prevent damage during storage. Its availability through our distribution network ensures fast delivery when you need it. When you choose this poly‑V belt, you are investing in a product that has been tested and proven in the harshest operating environments, offering the perfect combination of grip, durability, and value.
In summary, the 612600020424 Poly V Belt is a premium engine component that delivers superior grip, quiet operation, and exceptional durability for HOWO, Sitrak, and Shacman heavy‑duty trucks. Its advanced EPDM construction, precision‑molded ribs, and high‑strength tensile cords ensure that your alternator, water pump, and power steering system operate at peak efficiency. By investing in this genuine OEM‑grade belt, you are protecting your auxiliary systems from premature failure, reducing maintenance costs, and maximizing vehicle uptime.
Don’t settle for inferior belts that can lead to costly breakdowns. Choose the 612600020424 for your next replacement. With its proven track record and widespread acceptance in the industry, this poly‑V belt is the smart choice for professionals who demand reliability, performance, and peace of mind. Keep your auxiliary systems running smoothly and efficiently with the 612600020424 – the definitive choice for HOWO and Sitrak trucks.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
