Accurate wheel speed detection is the cornerstone of a dependable anti‑lock braking system, and the rear axle sensor plays a vital role in maintaining vehicle stability during emergency stops. The 2260100 ABS Sensor HOWO Rear is engineered to deliver precise, real‑time speed data to the ABS control unit, ensuring optimal brake modulation and preventing wheel lock‑up on slippery surfaces. As a critical Howo/Sitrak truck parts component, this rear ABS sensor is manufactured from high‑grade materials with a rugged, weather‑sealed housing, providing reliable performance in extreme temperatures, moisture, and vibration. Whether you are replacing a faulty sensor or performing preventative maintenance, the 2260100 guarantees a perfect factory fit, consistent signal output, and long‑lasting durability – making it the trusted choice for professional workshops and fleet operators worldwide.
The rear ABS sensor is responsible for monitoring the rotational speed of the rear wheels, providing essential input for the ABS control module to adjust brake pressure and prevent wheel lock‑up. The 2260100 is specifically designed for HOWO heavy‑duty trucks, offering high‑resolution digital signals that enable the ABS system to react instantly to changing road conditions. A faulty or degraded sensor can cause the ABS warning light to illuminate, reduce braking effectiveness, and compromise vehicle stability. HOWO has engineered this sensor with a robust Hall‑effect element and a durable, waterproof connector, ensuring consistent signal integrity even in harsh environments. With the 2260100, you restore the full functionality of your rear ABS, enhancing safety and driver confidence on every journey.
Precision Signal
Accurate Speed Data
Rugged Design
Weather‑Sealed
OEM Fit
Exact Replacement
Reliable
Long Service Life
The 2260100 ABS sensor is manufactured to the highest OEM standards, incorporating advanced magnetic sensing technology and robust construction. Below are the complete technical specifications for this essential safety component.
| Parameter | Specification | Detail |
|---|---|---|
| OEM Number | 2260100 | Exact Match |
| Part Name | ABS Sensor HOWO Rear | Genuine HOWO |
| Brand | HOWO | Original Equipment |
| Application | HOWO T7H / A7 / Rear Axle | ABS Wheel Speed Monitoring |
| Sensor Type | Active Magnetic (Hall Effect) | Digital Output |
| Supply Voltage | 5 V DC – 16 V DC | Regulated |
| Output Signal | Digital Square Wave | Frequency Proportional to Speed |
| Operating Temperature | -40°C to +125°C | Extreme Range |
| Protection Class | IP67 | Dust & Waterproof |
| Connector Type | 2‑Pin (Deutsch / AMP) | Sealed |
| Mounting Type | Bolt‑on (M6 x 1.0) | With integrated bracket |
| Air Gap | 0.5 – 1.5 mm | Adjustable |
| Weight | 0.15 kg | Lightweight |
| Warranty | 12 Months | Manufacturer Guarantee |
The 2260100 ABS sensor utilizes advanced Hall‑effect technology to provide a high‑resolution digital signal that accurately reflects wheel speed. The sensor element is encapsulated in a robust, chemically‑resistant polymer housing that protects against moisture, dirt, and vibration. The integrated electronic circuitry ensures a stable output signal, even at low speeds, enabling the ABS control unit to make precise braking decisions. The sensor’s design includes an integrated alignment feature that simplifies installation and ensures the correct air gap between the sensor tip and the tone ring, eliminating the need for complex adjustments. Each sensor undergoes rigorous testing for signal integrity, temperature cycling, and vibration resistance, guaranteeing that the 2260100 meets HOWO’s exacting quality standards. This engineering excellence translates into a sensor that delivers consistent, reliable performance, helping to keep your vehicle’s ABS system operating at its best.
The 2260100 ABS sensor is specifically designed for HOWO heavy‑duty trucks, including the T7H, A7, and other models equipped with the standard rear ABS system. It directly replaces the original sensor with identical mounting points, connector type, and electrical characteristics, ensuring a straightforward plug‑and‑play installation. The sensor is compatible with both 4S/2M and 4S/4M ABS configurations, making it a versatile spare part for a wide range of applications. This sensor is also compatible with many Sinotruk and other commercial vehicles that utilize the same ABS system architecture. To confirm fitment, always cross‑reference the OEM number on your existing sensor with 2260100. If they match, this component will integrate seamlessly. Keeping this sensor in your spare parts inventory enables rapid ABS repairs, minimising downtime and ensuring your truck’s braking system remains fully functional.
HOWO T7H
Primary Fitment
HOWO A7
Also Compatible
Rear Axle
Direct Mount
Direct Replacement
No Modifications
Replacing a faulty or degraded ABS sensor with the 2260100 immediately restores the full functionality of your vehicle’s anti‑lock braking system. The accurate, high‑resolution speed signal allows the ABS control unit to modulate brake pressure with precision, ensuring optimal wheel slip control during emergency braking. This results in shorter stopping distances, improved vehicle stability, and reduced risk of skidding, particularly on wet or icy surfaces. The robust construction and sealed design also prevent moisture ingress, which is a common cause of sensor failure, ensuring long‑term reliability. For fleet operators, a reliable ABS sensor reduces the risk of accidents, lowers maintenance costs, and helps maintain compliance with safety regulations. By investing in the 2260100, you ensure that your HOWO truck delivers the safe, predictable braking performance that professional drivers and fleet managers depend on.
Installing the 2260100 ABS sensor is a straightforward procedure that can be performed with basic hand tools. Begin by safely raising the vehicle and removing the wheel to access the sensor mounting location. Disconnect the electrical connector from the old sensor, taking care to release any locking clips. Remove the mounting bolt and carefully extract the sensor from its bore. Clean the mounting surface and inspect the tone ring for any damage or debris. Install the new sensor, ensuring that it is fully seated and the mounting bolt is torqued to the manufacturer’s specification (typically 8–10 Nm). Reconnect the electrical connector and secure the wiring harness away from moving parts. After installation, start the engine and check for any ABS warning lights; if the light remains on, use a diagnostic tool to clear any stored fault codes. Periodically inspect the sensor and wiring for signs of wear or corrosion, and replace the sensor if any damage is found. With proper installation, the 2260100 will provide reliable ABS performance for many years.
Pro Tip: When replacing the ABS sensor, always inspect the sensor bore for dirt or corrosion, and clean it thoroughly before installation. Applying a thin layer of anti‑seize compound to the sensor body can help ease future removal. The 2260100 is designed for a precise fit; ensure that the air gap is correct to guarantee optimal signal performance.
Genuine HOWO components are engineered to the highest standards, and the 2260100 ABS sensor is no exception. Aftermarket sensors often use inferior sensing elements, less durable housing materials, or imprecise specifications, leading to erratic signals, premature failure, and potential ABS malfunctions. HOWO’s sensor is manufactured using the same materials and processes as the original equipment, guaranteeing a perfect fit and reliable performance. By choosing the 2260100, you benefit from HOWO’s rigorous testing, including signal accuracy, temperature cycling, and vibration endurance tests. This ensures that the sensor meets the demanding requirements of heavy‑duty trucking. Moreover, genuine parts are backed by a comprehensive warranty and supported by HOWO’s global network, giving you confidence in your purchase.
OEM Authentic
Factory Quality
Long Service
Extended Life
Global Standard
Trusted Worldwide
Q: Which vehicles use the 2260100 ABS sensor?
A: The 2260100 is designed for HOWO T7H, A7, and other heavy‑duty trucks, as well as many Sinotruk models that share the same ABS system.
Q: What are the symptoms of a failing ABS sensor?
A: An illuminated ABS warning light, erratic ABS activation during normal braking, longer stopping distances, and a noticeable loss of braking confidence are common indicators.
Q: Can I install the sensor myself?
A: Yes, the 2260100 is designed for straightforward installation with basic tools. However, if you are not confident, we recommend professional installation to ensure correct air gap and wiring routing.
Q: How do I verify the correct part?
A: Check the OEM number on your existing sensor. If it matches 2260100, this is the exact replacement. Consult your vehicle’s parts manual for additional confirmation.
Order your 2260100 ABS Sensor today! Explore our complete selection of genuine HOWO and Sinotruk safety components at Howo/Sitrak truck parts and keep your braking system operating at peak performance.
The 2260100 ABS Sensor from HOWO is a testament to precision engineering and uncompromising quality. By choosing this genuine component, you ensure that your truck’s anti‑lock braking system receives accurate, reliable wheel speed data, enhancing safety and braking performance in every driving condition. Whether you are a professional mechanic or a fleet manager, this sensor offers the performance, durability, and exact fit required for modern heavy‑duty trucks. Trust HOWO – the benchmark for excellence in heavy‑duty truck components – and experience the difference that genuine quality makes.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
