Achieving precise component alignment is non-negotiable for drivetrain reliability and chassis integrity. The 19915E+11 Right bracket from HOWO is engineered to provide a rigid, vibration-resistant mounting point for critical assemblies such as engine supports, transmission mounts, and suspension links. As an indispensable Howo/Sitrak truck parts solution, this right bracket is forged from high-strength steel and precision-machined to exacting OEM tolerances, ensuring a perfect fit every time. Its robust construction eliminates flex and maintains geometric stability under extreme loads, reducing stress on bolts and surrounding components. Whether you are rebuilding a chassis or replacing a damaged mount, the 19915E+11 guarantees reliable support, extended service life, and consistent vehicle handling – making it the top choice for workshops and fleet operators worldwide.
The 19915E+11 Right bracket serves as the structural backbone for mounting heavy components like the engine, gearbox, or suspension arms. Any weakness or misalignment in this bracket can lead to accelerated wear of bushings, bolts, and connected parts, compromising vehicle safety and drivability. HOWO has engineered this bracket with a reinforced gusset design that distributes stress evenly, preventing cracks and deformation over time. Its precise hole spacing and surface flatness ensure that mounting bolts are not subjected to bending loads, reducing the risk of shearing. Whether on paved highways or rugged job sites, the 19915E+11 provides the unwavering support that keeps your truck’s vital systems securely in place, enhancing both performance and longevity.
Reinforced Design
Max Strength
Precision Geometry
Perfect Fit
OEM Grade
Genuine HOWO
Corrosion Guard
Long Life
Accurate dimensional data is essential for proper selection and installation. The 19915E+11 is manufactured to the highest standards, with every critical dimension verified using precision measurement equipment.
| Parameter | Specification | Detail |
|---|---|---|
| OEM Number | 19915E+11 | Exact Match |
| Part Name | Right bracket | HOWO Genuine |
| Brand | HOWO | Original Equipment |
| Application | HOWO T7H / A7 / MC Engines | Engine / Gearbox Mount |
| Material | High-Strength Steel (Q345B) | Forged & Heat-Treated |
| Bolt Hole Diameter | 14.5 mm (x4) | M14 bolts |
| Thickness | 8 mm (plate) | Reinforced ribbing |
| Surface Finish | Zinc plating + passivation | Corrosion resistant |
| Weight | 2.8 kg | Substantial strength |
| Warranty | 12 Months | Manufacturer Guarantee |
The 19915E+11 Right bracket is produced using a state-of-the-art forging process that aligns the metal grain flow along the stress paths, significantly increasing its fatigue resistance. After forging, the bracket undergoes a controlled normalization heat treatment to relieve internal stresses and achieve uniform hardness. The mounting surfaces and hole locations are then CNC-machined to tight tolerances (within ±0.1 mm), ensuring that the bracket mates perfectly with the frame rails and the component being supported.
The addition of strategically placed gussets and ribs enhances the structural rigidity without adding unnecessary weight. The zinc-plated finish, followed by a clear trivalent chromate passivation, provides excellent corrosion protection, even in salt-spray environments. Every 19915E+11 is subjected to a dye-penetrant inspection to detect any surface flaws, guaranteeing that only defect-free brackets reach the customer. This meticulous engineering delivers a component that not only supports heavy loads but also maintains alignment over the long haul.
The 19915E+11 is specifically designed for HOWO heavy-duty trucks, particularly the T7H and A7 series equipped with MC11 or MC13 engines. It is commonly used as the right-side engine mount bracket, transmission support bracket, or suspension attachment point. Its hole pattern and offset precisely match the original factory specifications, allowing for a direct bolt-on replacement without any modifications.
This bracket is also compatible with various Sinotruk models that share the same chassis architecture. To confirm fitment, always compare the OEM number stamped on your existing bracket with 19915E+11. If they match, this component will integrate seamlessly. Keeping this bracket in your spare parts inventory ensures rapid turnaround during chassis repairs or engine overhauls, minimizing costly downtime.
HOWO T7H
Primary Fitment
HOWO A7
Also Compatible
Engine Mount
Right Side
Direct Replacement
No Modification
Upgrading to the 19915E+11 Right bracket delivers immediate improvements in chassis stability. The precise fit eliminates any play in the mounting, reducing vibrations transmitted to the cab and improving driver comfort. Additionally, the robust design prevents the bracket from bending or cracking under heavy torque loads, ensuring that the engine and gearbox remain perfectly aligned – a critical factor for driveline efficiency and bearing longevity.
The corrosion-resistant coating extends the service life of the bracket, even when exposed to road salt, mud, and moisture. Fleet managers will appreciate the reduction in maintenance frequency, as this bracket outlasts many aftermarket alternatives. By investing in the 19915E+11, you protect the surrounding components from undue stress and prevent misalignment-related failures, resulting in lower total cost of ownership.
Installing the 19915E+11 Right bracket is a straightforward process. Begin by safely supporting the component that the bracket will hold (e.g., engine or transmission). Remove the old bracket and clean the mounting surfaces on the frame rail and the component to remove any rust, dirt, or old gasket material.
Position the new bracket against the frame, aligning the bolt holes. Insert new high-strength grade 10.9 bolts and apply a thread-locking compound. Torque the bolts to the manufacturer’s specification in a cross-pattern to ensure even clamping. Lower the component onto the bracket and secure it with the appropriate bolts. After installation, check for any clearance issues and verify that the component sits level. Periodically re-torque the bolts after the first few hundred kilometers of operation. With proper installation, the 19915E+11 will provide years of reliable support.
Pro Tip: Always replace the mounting bolts and nuts when installing a new bracket. Old fasteners may have stretched or suffered corrosion, compromising clamp load. The 19915E+11 is designed to work with grade 10.9 or higher hardware.
Genuine HOWO brackets are engineered to the highest standards of quality and durability. Aftermarket brackets often use thinner steel or imprecise hole locations, leading to poor fit, increased stress, and premature failure. The 19915E+11 is manufactured using the same dies and processes as the original equipment, guaranteeing a perfect fit and reliable performance.
By choosing the 19915E+11, you benefit from HOWO’s rigorous testing and validation, which includes finite element analysis (FEA) and real-world durability trials. This ensures that the bracket can withstand the extreme loads and vibrations typical of heavy-duty trucking. Moreover, genuine parts are backed by a comprehensive warranty and supported by a global network of distributors, giving you confidence in your purchase and long-term reliability.
OEM Authentic
Factory Quality
Long Service
Extended Life
Global Standard
Trusted Worldwide
Q: Which vehicles use the 19915E+11 Right bracket?
A: It is designed for HOWO T7H and A7 trucks, as well as other models with MC11/MC13 engines that require a right-side engine or transmission mount.
Q: Is this bracket reversible (can it be used on the left side)?
A: No, it is specifically a right-hand bracket. The hole pattern and offset are designed for the right side only. Using it on the left side will not align properly.
Q: What material is used?
A: It is forged from high-strength Q345B steel and heat-treated for maximum durability.
Q: How do I verify this is the correct bracket for my truck?
A: Check the OEM number on your existing right bracket. If it reads 19915E+11, this is the exact replacement. You can also consult your vehicle’s parts catalog.
Order your 19915E+11 Right bracket today! Explore our complete inventory of genuine HOWO and Sinotruk chassis parts at Howo/Sitrak truck parts and keep your vehicle’s mounting system rock-solid.
The 19915E+11 Right bracket from HOWO is a testament to robust engineering and uncompromising quality. By choosing this genuine component, you ensure that your engine and transmission remain securely mounted, minimizing vibration and preventing premature wear. Whether you are a professional mechanic or a fleet manager, this bracket offers the strength and precision required for the most demanding applications. Trust HOWO – the benchmark for excellence in heavy-duty truck components – and experience the difference that genuine quality makes.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
