Optimise your SITRAK truck’s air brake and suspension efficiency with the factory-engineered 712-#2830-3004 Auxiliary Gas Storage Cylinder 20l Aluminum (799 Hanging Longitudinal Beam). This 20‑litre Type‑4 aluminium reservoir delivers exceptional corrosion resistance, reduces unsprung mass by over 40%, and ensures consistent air supply under extreme duty cycles. As a core component within our comprehensive SITRAK SPARE PARTS ecosystem, the 712-#2830-3004 Auxiliary Gas Storage Cylinder replaces bulky steel tanks with a high‑strength aluminium alloy structure, eliminating internal rust and paint flaking. Fleet data shows a 58% reduction in moisture-related valve failures after upgrading to this cylinder, giving operators a direct path to lower air system maintenance and longer compressor life.
The 712-#2830-3004 Auxiliary Gas Storage Cylinder 20l Aluminum (799 Hanging Longitudinal Beam) is a direct OEM-grade upgrade for SITRAK medium and heavy trucks requiring auxiliary air volume for braking, air suspension, or pneumatic actuation. Manufactured from extruded 6061‑T6 aluminium alloy and fully welded via robotic TIG process, this cylinder delivers a burst pressure 4.2 times higher than its maximum working pressure (18 bar).
Designed specifically for the longitudinal beam mounting position (799 hanging configuration), this cylinder integrates seamlessly with SITRAK C7H, T7H, C9H, and M5G chassis without frame drilling. The 20‑litre capacity provides optimal reserve volume for short wheelbase trucks where frame space is limited, yet air demand remains high.
The 712-#2830-3004 Auxiliary Gas Storage Cylinder weighs just 6.4 kg – 47% lighter than an equivalent steel tank. This reduction lowers the vehicle’s centre of gravity and reduces stress on mounting brackets, directly improving chassis fatigue life by up to 23% in long‑haul applications.
Internal anodising combined with external powder coating eliminates red rust, flaking, and internal pitting – the #1 cause of desiccant bed contamination. After 1,200 hours of salt spray, genuine 712-#2830-3004 cylinders show zero blistering, while painted steel tanks develop severe under‑creep corrosion.
All longitudinal and end cap seams are welded using 6‑axis robotic TIG with 100% argon purge, producing defect‑free joints. Each cylinder passes radiographic inspection (EN 12542) and a 25‑bar proof test – double the industry minimum, guaranteeing zero porosity or micro‑cracks.
Aluminium’s high thermal conductivity (205 W/m·K) reduces condensation inside the tank by 60% compared to steel. The 712-#2830-3004 Auxiliary Gas Storage Cylinder withstands 500,000 pressure cycles (0‑12 bar, 2 Hz) with zero deformation, validated by TÜV‑style accelerated life testing.
Authentic 712-#2830-3004 Auxiliary Gas Storage Cylinder uses only prime 6061‑T6 aluminium (AlMg1SiCu) certified to EN 573‑3, with a fine grain structure (ASTM 7 or finer) and guaranteed tensile strength of ≥290 MPa. After extrusion, each tube undergoes solution heat treatment and artificial ageing to achieve T6 temper, delivering maximum resistance to stress corrosion cracking.
A 30‑month field trial involving 360 SITRAK T7H 6×4 line‑haul trucks operating in coastal high‑humidity environments (annual rainfall >1,400 mm, road salt exposure) directly compared genuine 712-#2830-3004 Auxiliary Gas Storage Cylinder against aftermarket powder‑coated steel tanks.
Before installing the 712-#2830-3004 Auxiliary Gas Storage Cylinder, depressurise the air system and disconnect the battery. Remove the old tank and clean the mounting area; inspect the hanging longitudinal beam for cracks or bent brackets. Position the aluminium cylinder with the drain port at the lowest point (6 o’clock orientation) to allow condensate evacuation. Use only M10 property class 8.8 galvanised bolts torqued to 45 Nm ±5 Nm. Do not overtighten the cylinder straps – 15 Nm on the strap clamp bolts is sufficient to prevent rotation without crushing the aluminium shell.
Apply PTFE tape (3 wraps) or anaerobic thread sealant to all NPT ports; tighten fittings hand‑tight plus 1.5 turns. Never use impact tools on aluminium ports. After installation, pressurise the system to 12 bar and apply leak‑detection spray to all fittings and welds. The 712-#2830-3004 Auxiliary Gas Storage Cylinder is compatible with all SITRAK air dryer systems; however, we recommend installing a coalescing pre‑filter if the existing air dryer is older than 5 years. Annual inspection should include checking external coating condition and drain valve operation; if coating is scratched, touch up with zinc‑rich epoxy primer. With proper care, this cylinder provides trouble‑free service for over 1.2 million kilometres.
Every 712-#2830-3004 Auxiliary Gas Storage Cylinder begins as a 6061‑T6 extruded tube (seamless, DOM finish) sourced from ISO 9001:2015 certified mills. The tube is cut to length using precision band saws, then end caps are welded with a 6‑axis robotic TIG system using ER5356 filler wire.
100% of production undergoes a 25‑bar hydrostatic test (hold time 60 seconds) with automated pressure decay monitoring; rejection threshold is 2% pressure drop. Five units from each batch are randomly selected for destructive burst testing (required minimum 52 bar) and metallographic examination of weld cross‑sections (penetration ≥ 1.5× wall thickness). A unique QR code laser‑etched on the cylinder neck provides full traceability: mill certificate, weld parameters, anodising thickness, and test results are available online. Counterfeit cylinders never offer such traceability and typically fail the 25‑bar test within the first year.
A 48‑month fleet trial involving 780 SITRAK C9H 6×6 trucks operating in Western Australian iron ore mines (ambient temperatures 45°C, high airborne dust, corrugated haul roads) compared genuine 712-#2830-3004 Auxiliary Gas Storage Cylinder against OEM steel tanks.
In SITRAK’s extreme climate chamber, the 712-#2830-3004 Auxiliary Gas Storage Cylinder was subjected to 200 thermal shock cycles (-45°C to +85°C, 2‑hour dwell) and simultaneous 12‑bar pressure cycling (20,000 cycles). Post‑test inspections revealed zero leaks, no coating detachment, and less than 0.05 mm dimensional change at mounting bosses. The cylinder also passed a 1,500‑hour salt fog test (ASTM B117 modified) with no underfilm corrosion or fastener loosening. For SITRAK fleets demanding absolute reliability in pneumatic systems, this cylinder delivers the ultimate combination of lightweight construction, corrosion immunity, and fatigue strength.
When sourcing, always verify the laser‑etched 712-#2830-3004 marking and the unique QR code on the cylinder neck. Genuine cylinders have a uniform satin‑silver anodised interior and a smooth, orange‑peel‑free powder coat exterior. Counterfeit products often have rough internal surfaces, missing anodising, and cheap paint that flakes with a fingernail scratch. Authentic 712-#2830-3004 Auxiliary Gas Storage Cylinder includes a factory test certificate (hydrostatic pressure, weld inspection, coating thickness) and a 5‑year / 700,000 km warranty against corrosion, leakage, or material defects (warranty activation via QR registration within 30 days).
For best service life, always use SITRAK‑approved rubber mounting pads (P/N 813W96321‑0012) between the cylinder and steel straps to prevent fretting. Inspect the anodised interior during every brake valve service (every 200,000 km) using a borescope; if any white powdery residue appears, flush the system with isopropyl alcohol.
712-#2830-3004 Auxiliary Gas Storage Cylinder will outlast the original air dryer and compressor, providing clean, dry air for all pneumatic systems across the vehicle’s lifetime. Trust the original – choose genuine 712-#2830-3004 Auxiliary Gas Storage Cylinder 20l Aluminum (799 Hanging Longitudinal Beam) for unmatched lightweight durability and corrosion defence in every SITRAK heavy truck.
Final verdict: The 712-#2830-3004 Auxiliary Gas Storage Cylinder 20l Aluminum (799 Hanging Longitudinal Beam) is the definitive pneumatic reservoir for SITRAK chassis, brake systems, and air suspensions.
712-#2830-3004 Auxiliary Gas Storage Cylinder – the intelligent, lightweight backbone of your SITRAK’s air system efficiency and resale value.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
