Superior control, zero compromise. When your fleet demands absolute precision, the 199018430006 Steering Tie Rod delivers engineered excellence. As a genuine Howo/Sitrak truck parts solution, this component is forged to outlast extreme loads, harsh terrain, and continuous operation. With a tensile‑strength design that exceeds OE specifications, the 199018430006 tie rod ensures responsive steering, reduced tire wear, and predictable handling – mile after mile. Whether you maintain a construction fleet or long‑haul rigs, this is the steering backbone you can trust.
The 199018430006 is not just another tie rod; it is a meticulously crafted steering component that defines reliability. Manufactured from high‑grade alloy steel with anti‑corrosion coating, it resists fatigue and deformation even under repeated high‑torque steering inputs. Every unit is tested for dynamic alignment, ensuring that your Howo or Sitrak maintains factory‑spec toe angles. With hardened ball joints and sealed boots, this tie rod prevents contamination and reduces maintenance intervals, giving you more uptime and lower operating costs.
Cold‑forged construction with induction‑hardened threads. The 199018430006 withstands side loads up to 28 kN, far exceeding standard aftermarket parts. Perfect for off‑road and on‑highway applications.
Zero‑play ball joints and precisely machined taper ensure immediate steering feedback. Reduce driver fatigue and improve fuel efficiency with accurate tracking – the 199018430006 keeps your wheels aligned.
Direct replacement for Howo, Sitrak, and compatible chassis. No modification needed. The 199018430006 matches original mounting points, thread pitch, and torque specs – seamless installation.
Advanced grease retention and dual‑lip seals keep dirt out. With proper maintenance, the 199018430006 delivers >500,000 km of reliable service. Lower total cost of ownership.
Below are the key parameters for the Steering Tie Rod 199018430006. All measurements conform to Howo/Sitrak original standards, ensuring hassle‑free integration and optimal steering geometry.
| Parameter | Value / Specification |
|---|---|
| OEM Number | 199018430006 |
| Product Type | Steering Tie Rod (complete assembly) |
| Material | High‑carbon alloy steel, Zn‑Ni coating |
| Thread Size | M30 × 1.5 (RH / LH) |
| Length (center to center) | 1215 mm ± 1.5 mm |
| Ball Joint Taper | 1:8, standard Howo/Sitrak |
| Torque Spec | 380‑420 Nm (dry thread) |
| Weight | 6.8 kg (net) |
| Service Interval | Inspect every 30,000 km |
Fits all Howo T7H, A7, and Sitrak C7H series (2015–2026) with standard steering linkage. The 199018430006 replaces OEM units without additional shims. Always replace both tie rod ends simultaneously for balanced wear. Use thread‑locking compound and tighten to specified torque. After installation, perform a wheel alignment to maximize the benefits of this precision steering component.
Fleet managers and owner‑operators consistently report improved steering stability after switching to the 199018430006. The robust design minimizes play, which translates to better lane‑keeping and reduced steering corrections on long hauls. In construction environments, where potholes and uneven surfaces are daily challenges, this tie rod absorbs shock without bending or loosening. Its corrosion‑resistant finish ensures that even in salt‑spray regions, the threads and ball joints remain functional and easy to adjust.
Compared to generic alternatives, the 199018430006 offers a 40% higher fatigue limit, based on laboratory cyclic tests. The internal ball stud is induction‑hardened to 58 HRC, providing exceptional wear resistance. Additionally, the dust boot is made from chloroprene rubber with a steel insert, preventing tear and maintaining grease integrity. Every component is 100% dimensionally inspected, so you receive a part that fits perfectly the first time.
For heavy‑haul operations, the 199018430006 reduces tire scrub and uneven tread wear, saving hundreds of dollars per tire set over the component’s lifetime. The precise toe‑in adjustment capability allows fine‑tuning for different load conditions, making it a versatile choice for both empty and fully laden trucks. With minimal steering free‑play, driver confidence increases, especially in adverse weather or emergency maneuvers.
To maximize the service life of your Steering Tie Rod, lubricate the ball joints every 15,000 km using high‑temperature lithium grease. Inspect the boots for cuts or cracks; replace immediately if damaged to avoid contamination. Check the clamping bolts for proper torque after the first 500 km of operation, as new components may settle. Keep the threads clean and apply anti‑seize compound on the adjuster sleeve to facilitate future alignment adjustments.
Regularly verify the steering play by rocking the wheel at 3 and 9 o’clock positions. Excessive movement indicates possible wear in the tie rod ends. With the 199018430006, early detection of wear is easy due to the visible wear indicator on the ball stud. Replace the entire assembly if the play exceeds 3 mm to maintain optimal safety and handling.
Micro‑alloyed steel with vanadium and titanium provides grain refinement. The 199018430006 achieves 850 MPa tensile strength, ensuring no brittle fracture under impact.
Each 199018430006 is dynamically matched to reduce vibration. This improves steering wheel comfort and reduces wear on the power steering pump and gearbox.
Every steering tie rod 6 undergoes a multi‑stage quality process: raw material spectrography, forging grain flow analysis, thread concentricity test, and 100% magnetic particle inspection for surface defects. The assembly is then tested for torque retention, angular deflection, and boot seal integrity. We stand behind the 199018430006 with a 24‑month unlimited‑mileage warranty against manufacturing defects – a testament to its robust engineering.
The Steering Tie Rod is also compatible with aftermarket lift kits and leveling systems, provided the steering geometry is re‑aligned. Its adjuster sleeve design allows up to 12 mm of length adjustment, accommodating various chassis heights. For fleets running different trailer configurations, this adjustability simplifies axle alignment and reduces tire wear across the entire vehicle combination.
In addition, the 199018430006 meets or exceeds all relevant ECE R13 and FMVSS safety standards. Its ball joint retention force is 2.5 times the recommended minimum, giving you an extra margin of safety. When you choose this tie rod, you’re not just buying a part – you’re investing in predictable steering, lower maintenance, and higher resale value for your truck.
The 199018430006 is produced in a zero‑waste facility with recycled steel content. Water‑based coating reduces VOC emissions, aligning with sustainable fleet goals.
Each 199018430006 comes in a reinforced carton with foam inserts, preventing damage during shipping. Bulk orders available for fleet stocking.
From the rugged mining roads to the interstate highways, the Steering Tie Rod proves its mettle. Its unmatched combination of strength, precision, and longevity makes it the preferred replacement for workshop technicians and fleet managers worldwide. With straightforward installation, low maintenance requirements, and significant cost savings over its lifecycle, this tie rod is the definitive upgrade for your Howo or Sitrak.
Don’t settle for uncertain steering or frequent replacements. The Steering Tie Rod delivers consistent, reliable performance that keeps your cargo moving and your drivers satisfied. Order the Steering Tie Rod today and experience the difference that genuine‑grade engineering makes in every turn.
All technical data for Steering Tie Rod are based on Howo/Sitrak original specifications. Always refer to your vehicle service manual for torque and alignment procedures.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
