The part is a precision-engineered core kit for the HOWO Max 4X2 rear axle.
It includes the differential case, cover, planetary gears, shafts, gaskets, axle shaft gears, and thrust washers.
This assembly enables smooth torque distribution to the wheels while allowing speed differentiation during turns.
As genuine howo Parts, The part meets the highest OEM standards.
Every component is engineered for strength, durability, and precise fitment.
The differential case is the main housing that holds all internal gears and shafts.
The cover seals the assembly and retains the lubricating oil.
Planetary gears and shafts transmit torque from the ring gear to the axle shafts.
The gaskets and thrust washers reduce friction and manage axial play.
This differential assembl kit is the ideal solution for rebuilding or upgrading the rear axle differential.
It restores factory-level traction and drivability to your HOWO Max 4X2.
Trust in HOWO’s engineering and the quality of this differential assembl.
Keep your truck performing at its peak on every journey.
The Differential case is the main housing of The part, holding all internal gears.
It is made from high-strength ductile iron for exceptional rigidity and impact resistance.
The case provides precise bearing journals and gear mounting surfaces.
It is a critical component for maintaining gear alignment and load distribution.
Replace a damaged case to restore the structural integrity of The part.
The Differential cover seals the rear of the differential case, retaining lubricant.
It is made from stamped steel with a corrosion-resistant coating.
The cover includes a fill plug and a magnetic drain plug to capture metal particles.
It is essential for keeping The part clean and well-lubricated.
Replace a damaged or leaking cover to prevent oil loss and contamination.
The Planetary gears are precision-cut helical gears that transfer torque from the ring gear to the side gears.
They are mounted on the planetary shafts and rotate freely within the differential case.
These gears are made from case-hardened alloy steel for exceptional wear resistance.
They are a key component of The part, enabling smooth power distribution.
Replace worn planetary gears to eliminate noise and ensure reliable torque transfer.
The Planetary shafts are hardened steel pins that support the planetary gears within the differential case.
They provide a precise bearing surface for the gears and withstand high shear loads.
The shafts are retained in the case by snap rings or press-fit.
They are a critical component for the correct operation of The part.
Replace worn or scored shafts to restore smooth gear rotation and reduce friction.
This thin metal shim is placed between the planetary gear and the case to control axial clearance.
It reduces wear and prevents gear binding due to thermal expansion.
The gasket is made from hardened steel with a precise thickness tolerance.
It is an essential part of The part for proper gear mesh.
Replace worn gaskets to maintain correct backlash and quiet operation.
The Axle shaft gear is a splined gear that connects the differential to the axle shaft.
It transmits torque from the differential to the drive wheels.
The gear is made from high-strength steel with induction-hardened teeth.
It is a critical component of The part for power delivery.
Replace a worn or damaged axle shaft gear to restore smooth power transfer.
The Thrust washer is a hardened steel ring placed between the axle shaft gear and the case.
It absorbs axial thrust forces and reduces wear on the gear and case surfaces.
The washer is precision-ground for flatness and smooth operation.
It is a vital component for the longevity of The part.
Replace worn thrust washers to prevent gear end-play and excessive wear.
| Material Encoding | Name |
|---|---|
| AZ711732000091 | Differential case |
| 812-35105-0063 | Differential cover |
| AZ711732000085 | Planetary gear |
| AZ010000000025 | Planetary shaft |
| AZ711732000089 | Planetary gear gasket |
| 812W35106-0055 | Axle shaft gear |
| 810W35613-0050 | Thrust washer |
This differential assembl kit includes all internal gears, shafts, washers, and the case and cover.
It provides everything needed to rebuild the differential core.
No need to source individual parts separately.
All gears and shafts are case-hardened alloy steel for maximum wear resistance.
The case and cover are ductile iron for superior strength.
This differential assembl is built to handle the toughest loads.
All components are machined to exact OEM tolerances.
The gaskets and thrust washers ensure correct backlash and minimal gear noise.
This differential assembl delivers smooth, quiet operation.
As genuine howo Parts, this differential assembl is designed by HOWO engineers.
It meets the same quality standards as the original equipment.
Backed by HOWO’s global service network.
The part is the core of your HOWO Max 4X2’s rear axle traction system.
It allows the wheels to rotate at different speeds during turns while maintaining drive.
Over time, gears wear, bearings loosen, and the case can suffer damage from shock loads.
Rebuilding with this complete differential assembl kit restores factory-grade traction.
The case provides rigid support, the cover seals the oil, and the gears transmit torque.
The planetary gears and shafts distribute the load evenly.
The gaskets and thrust washers manage axial play and reduce friction.
This kit is designed for professional installation with proper tools.
Regular maintenance of The part extends its service life.
Check for oil leaks, unusual noises, or play in the axle shafts.
If any issues are found, replace the worn components with this genuine kit.
For fleet operators, standardizing on this differential assembl simplifies inventory.
It ensures consistent traction and drivability across all vehicles.
The durable construction reduces the frequency of major overhauls.
This lowers total cost of ownership and improves fleet availability.
Owner-operators gain peace of mind using genuine HOWO parts.
They know their differential assembl is built to the highest standards.
This kit is compatible with the vehicle’s existing ring and pinion.
It maintains the original gear ratio and driveline geometry.
No modifications are required – it is a direct fit.
In summary, The part kit is the definitive solution for axle rebuilding.
Its comprehensive design, OEM-quality, and ease of installation make it ideal.
Choose this differential assembl for your next axle service.
Experience the difference that genuine howo Parts deliver.
This investment ensures differential longevity, reduced noise, and reliable traction.
Order The part today.
Restore your HOWO Max 4X2’s rear axle to factory-new condition.
Drive with confidence, knowing your differential assembl is secure.
The part – engineered for HOWO Max 4X2, delivering complete differential core reliability and traction.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
