| No. | Part No. | Name |
|---|---|---|
| 1 | 712W25441-0051 | Left Warning Light Bracket Assembly (LTE135/Semi-high Roof) |
| 2 | WG9719790021 | Warning Light (LTE135) |
| 3 | 712W62900-6214 | Wide-body High-roof Roof Panel Rework for Dual Warning Lights |
| 4 | 712W25441-0052 | Right Warning Light Bracket Assembly (LTE135/Semi-high Roof) |
| 5 | WG9200720002 | Rubber Grommet |
| 6 | 190007992576 | Sealant (TEROSTAT33) |
| 7 | 812W25503-6047 | Warning Light Switch |
| 8 | 712-25452-6104 | Warning Light Switch Harness |
| 9 | 712-25452-6106 | C7H Warning Light Roof Harness |
| 10 | AZ9918770072 | Additional Warning Light Harness (High-roof) |
This left‑side bracket is specifically designed for the LTE135 warning light on semi‑high roof C7H cabs. It is made from galvanized steel and features pre‑drilled mounting holes. The assembly ensures the light is positioned at the correct angle for maximum visibility.
The LTE135 is a high‑intensity LED warning light with a low profile. It produces 135 lumens and features a flash pattern selector. The light is sealed against moisture and dust, making it suitable for all weather conditions.
This is a specially reworked roof panel for wide‑body high‑roof cabs that accommodates dual warning lights. The panel includes reinforced mounting areas and integrated cable channels, ensuring a factory‑finish installation.
The right‑side bracket is a mirror image of the left, providing a balanced mounting solution. It includes the same corrosion‑resistant coating and precision alignment features.
This rubber grommet is used to protect the wiring harness where it passes through the roof panel. It seals against water and dirt, preventing short circuits and maintaining the cab’s interior integrity.
TEROSTAT33 is a high‑performance body sealant used to seal the bracket mounting holes and prevent water ingress. It remains flexible after curing and adheres well to painted metal surfaces.
This is a rocker switch that controls the warning lights. It features a illuminated icon and is designed to fit into the C7H dashboard switch panel. The switch has a positive detent for reliable operation.
This pre‑terminated harness connects the switch to the main vehicle wiring. It includes the correct connectors and is wrapped in abrasion‑resistant tape for durability.
This is the main harness that runs from the cab interior to the roof‑mounted warning lights. It is long enough to accommodate both high‑roof and semi‑high‑roof configurations and includes waterproof connectors.
For high‑roof cabs that require an extra extension, this harness provides additional reach. It connects between the main roof harness and the warning light, ensuring compatibility with taller cab variants.
Every bracket, harness, and seal is engineered specifically for the C7H roof contour. No cutting or modification is required – simply bolt on and connect.
The included rubber grommets and TEROSTAT33 sealant ensure a watertight installation. This prevents leaks into the cab and protects electrical connections from moisture.
All wiring harnesses come with factory‑matching connectors. No splicing or soldering – just plug into the existing C7H electrical architecture for immediate function.
We supply everything you need – brackets, lights, switches, harnesses, grommets, and sealant. No extra parts to source, saving you time and ensuring a professional result.
The Rufter for Roof-Mounted Warning Lights is a comprehensive system designed for Sitrak C7H trucks that require high‑visibility warning signals. Whether for emergency services, construction, or heavy haulage, this kit ensures reliable operation.
The system is built around the LTE135 LED warning light, known for its brightness and energy efficiency. Each light draws only 12W but produces a beam visible from over 500 meters in clear conditions.
Installation is simplified by the included brackets, which are laser‑cut and powder‑coated for a perfect fit. The left and right brackets are distinct to accommodate the roof curvature, ensuring the lights sit level.
The roof panel rework for dual lights is a pre‑modified panel that replaces the original. It features reinforced mounting points and pre‑cut holes for the harness, saving workshop time and eliminating the need for custom fabrication.
Rubber grommets are provided for every cable entry point. They are made from EPDM rubber that resists ozone, UV, and extreme temperatures, ensuring a long‑lasting seal.
TEROSTAT33 sealant is applied around the bracket bases to prevent water from seeping between the bracket and the roof. It cures to a flexible rubbery consistency that accommodates thermal expansion.
The warning light switch is a direct replacement for a blank in the C7H dash. It illuminates when activated, providing clear visual feedback to the driver. The switch is rated for 20A at 12V.
Two harnesses are included – the switch harness and the roof harness. The switch harness connects the dash switch to the vehicle’s power distribution, while the roof harness runs from the cab to the roof lights. Both are labeled for easy identification.
For high‑roof models, an additional harness extension is supplied. This adds the necessary length to reach the higher roof line without straining the wiring.
The entire Rufter for Roof-Mounted Warning Lights kit is designed to be installed by one person with basic hand tools. Total installation time is typically under two hours.
We recommend using a torque wrench for the bracket bolts to avoid over‑tightening and damaging the roof panel. All required torque values are provided in the instruction manual.
The warning lights feature multiple flash patterns, selectable via a small switch on the light housing. This allows you to choose steady burn, strobe, or alternating patterns to suit local regulations.
All components are tested to withstand the vibration and shock typical of heavy truck operation. The LED lights have a rated lifespan of 50,000 hours, virtually eliminating bulb replacement.
For fleet managers, standardizing on this kit ensures uniform lighting across all vehicles, improving brand recognition and safety. The kit is also compatible with retrofitting older C7H models.
We offer technical support for installation and troubleshooting. Our team can provide guidance on any aspect of the kit, from wiring diagrams to sealing tips.
Ordering the Rufter for Roof-Mounted Warning Lights is straightforward – use the Send Email or Get Quotation buttons above. We will reply with pricing, availability, and shipping options for your location.
Upgrade your C7H with this reliable, OEM‑quality warning light system. It’s a small investment that pays off in safety and compliance, ensuring your truck meets all legal requirements for warning beacons.
All parts come with a 12‑month warranty against manufacturing defects. We stand behind the quality of our products and are committed to your complete satisfaction.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
