| No. | Part No. | Name |
|---|---|---|
| 1 | 712W25441-6008 | Fuel‑Fired Heater System Controller |
| 2 | 712W25455-6015 | Plateau Component Additional Harness |
| 3 | 712W25455-6011 | Fuel‑Fired Heater Power Harness |
| 4 | WG9925770004 | Fuel Pump Chassis Wiring Harness |
| 5 | 712W61701-0291 | Rear Cover Plate |
| 6 | WG9918580087 | Independent Heater Sensor (Plateau Version) |
| 7 | 712W25455-6013 | Fuel‑Fired Heater Cab Bottom Wiring Harness (New Controller) |
The Fuel‑Fired Heater System Controller is the intelligent brain of the heating system, managing combustion timing, fuel metering, and fan speed. It features a built‑in diagnostic interface and temperature sensors that automatically adjust the heat output to maintain the desired cabin or engine temperature, ensuring optimal efficiency and safety.
The Plateau Component Additional Harness is a dedicated wiring extension designed for high‑altitude operation. It connects the heater controller to the altitude sensor, compensating for reduced oxygen levels to maintain proper combustion. This harness is essential for trucks operating above 3000 metres.
This power harness delivers high‑current supply directly from the battery to the heater unit, with heavy‑gauge cables and a waterproof fuse holder. It is pre‑terminated with ring terminals and a sealed connector, ensuring a reliable, low‑resistance path for the substantial current required during start‑up.
The Fuel Pump Chassis Wiring Harness routes control signals to the fuel dosing pump, ensuring precise fuel delivery to the heater. It is protected by a flexible, abrasion‑resistant loom and is routed along the chassis rail, away from heat sources and moving parts.
The Rear Cover Plate is a powder‑coated steel panel that protects the heater’s combustion chamber and exhaust outlet from road debris and water splash. It is designed to fit the C7H chassis perfectly, with pre‑drilled holes for easy installation and maintenance access.
This high‑precision sensor continuously monitors the ambient air pressure and temperature, adjusting the fuel‑air mixture for stable combustion at high altitudes. It is a critical component for reliable heater operation in mountainous regions, preventing flameouts and sooting.
This harness connects the new‑generation heater controller to the cab’s power and control network, enabling driver‑adjustable settings and diagnostic feedback via the dashboard. It is engineered for the revised controller interface and includes a CAN bus connection for integration with the vehicle’s electronic system.
Our Fuel-Fired Heater is manufactured to Sinotruk’s exacting standards, ensuring every component fits and functions as intended. The controller, harnesses, and sensors are calibrated for the C7H’s electrical architecture, delivering seamless integration and reliable operation.
The Fuel-Fired Heater quickly raises engine coolant temperature, reducing oil viscosity and enabling easier starts. It also provides cabin heating without running the main engine, saving fuel and reducing emissions during extended idling.
We supply all necessary wiring, controllers, sensors, and mounting plates for a full installation. The included harnesses are pre‑terminated and labelled, simplifying the replacement process and ensuring correct routing.
All components are built to withstand the harsh under‑chassis environment, with corrosion‑resistant coatings, sealed connectors, and high‑temperature insulation. The Fuel-Fired Heater is designed for long‑term reliability in the most demanding conditions.
The Fuel-Fired Heater is an essential system for heavy trucks operating in cold climates. It uses diesel fuel from the vehicle’s tank to generate heat, which is then transferred to the engine coolant and cabin heater core, significantly reducing warm‑up time and improving driver comfort.
The controller unit is designed with a user‑friendly interface, allowing drivers to set a timer or pre‑heat the engine remotely. Its advanced logic ensures that the heater only operates when necessary, conserving fuel and battery power.
The plateau‑specific components are a standout feature, making this system ideal for trucks that regularly traverse high mountain passes. The additional harness and altitude sensor automatically compensate for thinner air, maintaining a clean, efficient burn that prevents soot accumulation and extends the heater’s service life.
Installation is straightforward with the complete harness set. The power harness connects directly to the battery positive and negative terminals, while the control harness interfaces with the cab’s wiring. All connectors are keyed and colour‑coded to prevent misconnection.
A common issue with aging heating systems is corroded wiring or failed sensors, leading to intermittent operation or complete failure. Replacing the entire system with our genuine Fuel-Fired Heater kit restores full functionality and eliminates the guesswork of diagnosing multiple faults.
The rear cover plate is not merely a protective shield; it also incorporates acoustic damping material to reduce the characteristic ticking noise of the fuel pump, making the system more pleasant for drivers and bystanders alike.
We recommend that the Fuel-Fired Heater be tested before the onset of winter. Using a diagnostic tool, the controller’s error memory can be checked, and the heater can be fired up to verify that all components are functioning correctly.
For fleet operators, standardising on this genuine Fuel-Fired Heater ensures that all trucks have the same level of cold‑start capability and driver comfort. It also simplifies spare parts management and reduces the likelihood of field failures.
The new controller version features a more robust power supply that handles voltage fluctuations better, and the cab bottom wiring harness has been improved with higher gauge wires to reduce resistance and heat generation.
We back our Fuel-Fired Heater with a 12‑month warranty covering manufacturing defects. Our technical support team is available to assist with installation, programming, and troubleshooting.
We ship worldwide with tracking. Expedited shipping is available for urgent orders. Use the Send Email or Get Quotation buttons to request a personalised quote for your fleet or workshop.
Choosing a genuine Fuel-Fired Heater ensures that your C7H maintains its original performance and safety standards. Aftermarket copies often cut corners on wiring insulation and sensor accuracy, leading to unreliable operation and potential fire risks.
The independent heater sensor is a precision device that can be damaged by water ingress. We recommend inspecting its connector and sealing ring during installation to ensure a long service life.
The fuel pump chassis harness is designed with a loop that absorbs chassis flex, preventing strain on the connectors. This attention to detail is what distinguishes genuine Sinotruk parts from generic ones.
We maintain a large inventory of Fuel-Fired Heater kits to ensure fast dispatch, even for bulk orders. Contact our sales team for volume discounts and tailored logistics.
Thank you for considering our Fuel-Fired Heater for your Sitrak C7H. We are confident that our genuine OEM product will provide the reliable heat you need to keep your truck and driver comfortable in the coldest conditions.
The Fuel-Fired Heater is not just a luxury; it is a vital tool for protecting your engine from cold‑start wear and ensuring that your driver can operate in comfort and safety. Investing in a genuine system pays dividends in reduced maintenance and increased uptime.
We provide a comprehensive installation manual with torque specifications and wiring diagrams. Even if you are not a specialist, the clearly labelled components and connectors make the job accessible to any competent mechanic.
We offer a dedicated technical hotline for any installation questions. Our engineers have in‑depth knowledge of the C7H electrical system and can guide you through every step of the process.
With proper installation and regular maintenance, the Fuel-Fired Heater will provide years of dependable service, keeping your C7H ready for action no matter how low the temperature drops.
Upgrade your truck with the genuine Fuel-Fired Heater – the smart choice for cold‑weather reliability and driver comfort.
Order today and experience the difference that genuine Sinotruk quality makes. Our team is standing by to answer any questions and to process your order promptly.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
