| No. | Part No. | Name |
|---|---|---|
| 1 | 712-48220-5157 | Combination Pedal with Foam Seal |
| 2 | WG9000360550 | Brake Signal Transmitter (EBS3) |
| 3 | WG9000361501 | Nut Base NG8 (232 Series) |
| 4 | ZQ32008 | Hexagon Flange Nut M8 |
| 5 | 710W48210-0040 | Pivot Shaft |
| 6 | WG9123360051 | Needle Roller Bearing without Inner Ring (2819340100441) |
| 7 | 711W48240-0402 | Tappet |
| 8 | 810W48235-5077 | Brake Pedal Assembly |
| 9 | AZ9123230222 | Circlip |
| 10 | 810-97602-0908 | Compression Spring |
| 11 | 810W48220-0159 | Spring Seat |
| 12 | Q150B0830 | Hexagon Head Bolt |
| 13 | WG9123360067 | Plug (2819602003691) |
| 14 | 810W98183-6423 | Distribution Module |
| 15 | WG9123360054 | Elastic Ring Clamp (2819764002731) |
| 16 | 811W25970-6103 | Accelerator Pedal Assembly |
| 17 | MQ6-09089-0017 | Hexagon Socket Countersunk Flat Head Screw with Slot |
| 18 | MQ6-07213-4311 | Countersunk Round Head Screw D-6×18 |
| 19 | WG9123230226 | Pedal Rubber Cover |
| 20 | 09150010009 | Multi‑purpose Grease |
| 21 | 711W48220-0137 | Plug |
| 22 | Q218B0812 | Hexagon Socket Head Cap Screw |
| 23 | Q40308 | Spring Washer |
The Combination Pedal with Foam Seal is the main structural assembly that houses the brake and accelerator mechanisms. It features an integrated foam seal that prevents dust, moisture, and noise from entering the cab through the pedal opening, ensuring a quiet and comfortable cabin environment.
The Brake Signal Transmitter is a precision sensor that converts the mechanical movement of the brake pedal into an electrical signal for the EBS3 electronic braking system. It ensures rapid, accurate communication between the driver’s braking input and the vehicle’s braking actuators, contributing to shorter stopping distances and enhanced safety.
The Nut Base NG8 is a corrosion‑resistant threaded insert from the 232 series, providing a durable mounting point for pneumatic or electrical fittings. It ensures leak‑free connections for auxiliary lines routed through the pedal assembly area, enhancing the overall integrity of the Combination Pedal Assembly system.
The Hexagon Flange Nut M8 is a self‑locking fastener with an integrated flange that distributes clamping load evenly, eliminating the need for a separate washer. It is used to secure the pedal assembly to the cab floor, providing a vibration‑resistant connection that remains tight under all driving conditions.
The Pivot Shaft is a precision‑ground steel axle that supports the brake pedal and provides a smooth, low‑friction pivot point. Its hardened surface and tight tolerances ensure long‑lasting performance and consistent pedal feel in the Combination Pedal Assembly.
This needle roller bearing provides low‑friction support for the pivot shaft, reducing wear and ensuring smooth pedal operation. Its compact design without an inner ring allows for high load capacity in a limited space, making it ideal for the Combination Pedal Assembly’s tight packaging.
The Tappet is a precision‑machined component that transfers the movement of the brake pedal to the brake signal transmitter. Its hardened surface and precise geometry ensure accurate signal generation and consistent pedal feel, contributing to the reliability of the Combination Pedal Assembly.
The Brake Pedal Assembly is the primary driver interface for the braking system. It is designed with an ergonomic pedal pad and incorporates the pivot shaft, bearing, and return spring. This assembly provides a consistent and progressive brake feel, enhancing driver confidence and control.
The Circlip is a retaining ring that secures components on the pivot shaft, preventing axial movement. It is made from spring steel and provides a reliable, snap‑fit retention solution within the Combination Pedal Assembly.
The Compression Spring provides the return force for the brake pedal, ensuring that it returns to its rest position after application. Its precisely calibrated spring rate contributes to the pedal’s progressive feel, a key characteristic of the Combination Pedal Assembly.
The Spring Seat provides a stable mounting point for the compression spring, ensuring consistent spring alignment and force distribution. Its durable construction contributes to the long‑term reliability of the Combination Pedal Assembly.
The Hexagon Head Bolt is a standard M8 fastener used to secure various components within the Combination Pedal Assembly. Its zinc‑plated finish provides corrosion resistance, and its hexagonal head allows for easy tightening with standard tools.
The Plug is a sealing cap used to close unused ports or openings in the Combination Pedal Assembly, preventing dust, moisture, and debris from entering the mechanism. It is made from durable plastic and provides a secure, push‑fit seal.
The Distribution Module is a central connection point for the Combination Pedal Assembly’s electrical and pneumatic lines. It simplifies routing and provides a neat, organised interface for the brake signal transmitter and other accessories.
The Elastic Ring Clamp is a flexible retaining ring that secures hoses or cables in place, preventing them from chafing against sharp edges. It is an important detail for maintaining the reliability of the Combination Pedal Assembly’s associated lines.
The Accelerator Pedal Assembly is a separate unit that integrates with the Combination Pedal Assembly, providing precise throttle control. It features a potentiometer or Hall‑effect sensor that communicates the pedal position to the engine control unit for smooth and responsive acceleration.
This countersunk screw provides a flush, tamper‑resistant fastening solution for trim panels and covers within the Combination Pedal Assembly. Its slotted socket head allows for secure tightening without damaging surrounding surfaces.
This countersunk round head screw is used for securing components where a low‑profile finish is required. Its design prevents snagging and provides a clean, professional appearance within the Combination Pedal Assembly.
The Pedal Rubber Cover provides a durable, slip‑resistant surface for the driver’s foot. It is made from high‑quality rubber that resists wear, oil, and weathering, ensuring long‑lasting grip and comfort in the Combination Pedal Assembly.
The Multi‑purpose Grease is a high‑performance lubricant supplied with the Combination Pedal Assembly for lubricating the pivot shaft, bearings, and other moving parts. It reduces friction, extends component life, and ensures smooth pedal operation.
This second Plug is a sealing cap used to protect unused threaded holes or ports in the Combination Pedal Assembly. It ensures that the assembly remains clean and free from contamination.
The Hexagon Socket Head Cap Screw is a high‑strength fastener with an internal hex drive, providing a clean, recessed fastening solution for the Combination Pedal Assembly. Its compact head design allows for use in tight spaces.
The Spring Washer is a split‑ring lock washer that provides tension to prevent fasteners from loosening under vibration. It is used in conjunction with the hexagon socket head cap screws to ensure a secure, maintenance‑free connection in the Combination Pedal Assembly.
Our Combination Pedal Assembly is manufactured to Sinotruk’s original specifications, ensuring perfect compatibility with the C7H’s electronic and pneumatic systems. Every component is precision‑engineered for consistent, reliable performance.
The Combination Pedal Assembly delivers a natural, progressive pedal feel that reduces driver fatigue and enhances precision. The EBS3 brake signal transmitter and accelerator sensor provide consistent, responsive signals for smooth operation.
We supply every fastener, bearing, spring, seal, and lubricant needed for a full installation of the Combination Pedal Assembly. No additional parts are required, simplifying the replacement process and saving workshop time.
Built with heavy‑duty materials, sealed bearings, and corrosion‑resistant fasteners, the Combination Pedal Assembly withstands the rigours of daily truck operation. The supplied grease ensures smooth movement and extends component life.
The Combination Pedal Assembly is the primary interface between the driver and the vehicle’s braking and powertrain systems, integrating the brake and accelerator pedals into a single, ergonomic unit. It is specifically designed for the Sitrak C7H with WABCO‑EBS3 electronic braking and AMT transmissions, delivering precise, reliable control in all driving conditions.
The brake pedal is supported by a precision‑ground pivot shaft running in needle roller bearings, providing smooth, low‑friction movement. The return spring and spring seat ensure consistent pedal feel and reliable return to the rest position. The brake signal transmitter converts the mechanical pedal movement into an electrical signal, providing the EBS3 system with accurate driver demand information.
The accelerator pedal is a separate module that integrates into the Combination Pedal Assembly, providing the driver with precise throttle control. Its sensor outputs a variable signal to the engine control unit, enabling smooth acceleration and engine braking. The pedal rubber cover provides a durable, slip‑resistant surface for reliable foot grip.
The foam seal is a critical detail that prevents outside air, dust, and moisture from entering the cab through the pedal opening. This contributes to a quieter, more comfortable cabin environment and protects the pedal mechanism from corrosion.
All fasteners supplied with the Combination Pedal Assembly are made from high‑strength steel with corrosion‑resistant coatings. The hexagon flange nuts provide a self‑locking feature that prevents loosening under vibration, while the spring washers add an extra layer of security.
The multi‑purpose grease supplied with the kit should be applied to the pivot shaft and bearings during installation, ensuring smooth operation and reducing wear. Regular lubrication is recommended to maintain the pedal’s precise feel and long service life.
Replacing a worn or damaged Combination Pedal Assembly is a straightforward procedure. After disconnecting the battery and removing the old assembly, the new unit is installed using the supplied bolts and nuts. The electrical connectors are keyed to prevent incorrect installation, and the system self‑calibrates upon power‑up.
For fleet operators, maintaining a consistent pedal feel across all trucks is essential for driver comfort and safety. Our genuine Combination Pedal Assembly ensures that every vehicle in your fleet offers the same predictable response, reducing the risk of driver error.
The brake signal transmitter is calibrated to the EBS3 system’s specific voltage range, ensuring accurate communication and optimal braking performance. It is tested for reliability and durability, providing consistent operation over millions of cycles.
All components are designed to operate in extreme temperatures from -40°C to +85°C, ensuring reliable performance in all climates. The sealed bearings and corrosion‑resistant coatings protect against dust, moisture, and salt, making the Combination Pedal Assembly suitable for off‑road and coastal applications.
We recommend inspecting the pedal assembly periodically for any signs of wear, such as excessive play, sticking, or abnormal noise. Replacing a worn unit proactively can prevent sudden failures that could compromise vehicle safety.
We back our Combination Pedal Assembly with a 12‑month warranty against manufacturing defects. Our technical support team is available to assist with any installation or compatibility questions.
We ship worldwide with tracking. Expedited shipping is available. Use the Send Email or Get Quotation buttons to request a customised quote for your fleet.
Choosing a genuine Combination Pedal Assembly ensures that your C7H maintains its original driving characteristics and safety systems. Aftermarket units may not have the correct sensor calibration or mechanical tolerances, leading to poor drivability or diagnostic trouble codes.
The distribution module and nut bases provide a neat, organised mounting point for auxiliary lines, simplifying future maintenance and reducing the risk of chafing or damage to the wiring.
We are committed to providing the highest quality components and exceptional customer service. Choose our Combination Pedal Assembly for peace of mind.
Don’t compromise on control. Replace your aging pedal assembly with our genuine kit and enjoy the confidence that comes with a fully tested, factory‑fresh Combination Pedal Assembly.
We maintain a large stock to ensure fast dispatch, even for bulk orders. Contact our sales team for volume pricing and customised logistics solutions.
Thank you for considering our Combination Pedal Assembly for your Sitrak C7H. We are confident that our genuine OEM product will deliver the reliability and performance you expect from Sinotruk.
The Combination Pedal Assembly is a critical component for driver safety and vehicle control. Investing in genuine parts ensures that your truck responds precisely to your inputs, enhancing both comfort and safety.
We provide a comprehensive installation guide with torque specifications and wiring diagrams. The kit is designed for easy replacement, with all components clearly labelled for identification.
We are committed to helping you maintain your C7H in peak condition. Our technical helpline is staffed by engineers with deep knowledge of the pedal and control systems.
With proper installation and regular inspection, this Combination Pedal Assembly will provide years of dependable service, keeping your truck’s controls precise and responsive.
Upgrade your C7H with the genuine Combination Pedal Assembly – the smart choice for reliability, safety, and long‑term value.
We are proud to be a trusted supplier of OEM Sinotruk parts. Contact us today to order your Combination Pedal Assembly and experience the quality that only genuine components can deliver.
Don’t wait until a pedal failure compromises your safety. Replace your aging unit with our genuine kit and enjoy the peace of mind that comes with a fully tested, factory‑fresh system.
We are here to support your fleet’s needs with fast shipping and competitive pricing. Use the buttons above to request a quote or place your order.
The Combination Pedal Assembly is an essential part of your truck’s control system. Choose genuine Sinotruk parts for the best results.
We are confident that our genuine Combination Pedal Assembly will exceed your expectations. Order today and keep your C7H driving smoothly and safely.
We are proud to offer this high‑quality Combination Pedal Assembly kit, which includes every component needed for a complete replacement. It is the most reliable solution available for the Sitrak C7H.
Our Combination Pedal Assembly is built to meet the highest standards of quality and durability. You can trust it to perform when you need it most.
We look forward to serving your Sitrak C7H needs. Thank you for choosing our genuine parts for your vehicle.
We are committed to providing the best service and quality. Trust our Combination Pedal Assembly to deliver the performance you expect.
Order now and ensure your truck is equipped with the best pedal control system available. We are here to support you every step of the way.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
