The Non-rear-mounted power take-off is a specialized configuration that drives auxiliary equipment from the front or side of the engine, rather than the rear. This arrangement is essential for applications where rear clearance is limited or where front-mounted accessories such as hydraulic pumps, winches, or fire-fighting equipment are required. The Sitrak C7H supports this PTO variant through a dedicated drive housing and mounting interface, and the entire system relies on precision fasteners to ensure reliable power transmission.
This comprehensive Non-rear-mounted power take-off fastening kit includes the critical Hexagon Flange Bolt Q186-M10X40-10.9-MAN183-B1, which is used to secure the PTO unit to the engine block or adapter housing. Every component is engineered to OEM specifications, guaranteeing a perfect fit and reliable performance under the high torque loads typical of PTO-driven equipment.
The Non-rear-mounted power take-off system is designed to withstand the severe shock loads and continuous operation required by hydraulic pumps, compressors, and other industrial machinery. Its robust construction and precise alignment ensure minimal vibration and maximum efficiency, making it a preferred choice for specialized truck applications.
For complete technical specifications and ordering details, please refer to the official Sinotruk Catalog, which provides comprehensive information on all available variants and compatible truck models for the Non-rear-mounted power take-off.
This Non-rear-mounted power take-off fastening kit ensures that your PTO remains securely attached, preventing loosening due to vibration and torque fluctuations. The high-strength bolt included in this kit is the result of extensive engineering and testing, guaranteeing that it meets the demanding requirements of heavy-duty PTO applications.
Whether you are installing a new PTO or replacing worn fasteners, this Non-rear-mounted power take-off kit delivers factory-quality components and a straightforward installation. This Non-rear-mounted power take-off is the definitive choice for operators who demand reliable auxiliary power and long-term durability.
This high-strength hexagon flange bolt is the primary fastener used in the Non-rear-mounted power take-off mounting system. With a nominal diameter of M10, a length of 40mm, and a strength grade of 10.9, it is designed to provide exceptional clamping force and resistance to loosening under the severe vibration and torque loads encountered during PTO operation.
The bolt is manufactured from high-quality alloy steel and features a zinc-nickel coating that delivers superior corrosion resistance, ensuring reliable performance in the demanding environment of the engine bay. The integrated flange head eliminates the need for a separate washer, simplifying installation and ensuring even load distribution across the mounting surface. This bolt is precisely matched to the C7H engine’s PTO mounting points, guaranteeing a perfect fit and optimal load transfer.
In the Non-rear-mounted power take-off system, this bolt secures the PTO housing to the engine block or to an adapter plate, ensuring that the PTO gears remain properly meshed and that the drive shaft is accurately aligned. Its fine-pitch thread provides increased resistance to loosening, and the bolt is pre-coated with a thread-locking compound to further enhance security. Regular inspection and torque verification of these bolts is essential for maintaining the integrity of the PTO system, and this genuine replacement bolt ensures that the original clamping force is restored during service.
The Hexagon Flange Bolt Q186-M10X40-10.9-MAN183-B1 is a critical component that directly impacts the safety and reliability of the Non-rear-mounted power take-off. Its high tensile strength and fatigue resistance guarantee that the PTO remains securely attached even under extreme operating conditions, preventing costly downtime and component damage. This bolt is the recommended replacement for original equipment, and its use is essential for maintaining warranty compliance and ensuring the long-term performance of the PTO system.
The Non-rear-mounted power take-off system is engineered to deliver reliable power transfer to auxiliary equipment. The precision fasteners included in this kit ensure that the PTO remains securely mounted, preventing misalignment and premature wear of gears and bearings.
This Non-rear-mounted power take-off kit provides the essential high-strength bolt needed for a secure installation. While the PTO assembly itself includes multiple components, this fastener is the critical link that ensures the entire system stays intact under load.
The bolt in the Non-rear-mounted power take-off kit is manufactured from premium alloy steel with a zinc-nickel coating, providing excellent resistance to rust, chemicals, and thermal cycling. Its high fatigue strength ensures that it maintains clamping force over millions of operating cycles.
This Non-rear-mounted power take-off bolt is manufactured to the exact OEM specifications, guaranteeing a perfect fit on the Sitrak C7H. Its precise thread geometry and correct head height ensure compatibility with the original PTO housing, eliminating the risk of cross-threading or improper engagement.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
