The part is a precision steering linkage component that connects the steering gear to the left and right front wheels on the first axle of the HOWO A7 8X4 heavy truck. This robust tie rod assembly ensures accurate toe‑in alignment, precise steering response, and even tyre wear across the front axle. The part is engineered to withstand the high loads and frequent articulation encountered in heavy‑duty on‑road and off‑road operations, delivering consistent steering feel and stability.
At howo Parts, we supply the original equipment quality HOWO8x4first axle steer tie rod, manufactured to the exact specifications of the factory component. This HOWO8x4first axle steer tie rod features a heavy‑duty steel tube, precision‑forged ends, and robust ball joints that provide smooth, wear‑resistant articulation. The part is designed for direct bolt‑on replacement, ensuring that your steering system maintains its original geometry and performance. Every HOWO8x4first axle steer tie rod is subjected to rigorous quality control to guarantee reliability in the most demanding environments.
Proper steering geometry is critical for vehicle safety and tyre life, and The part plays a central role in maintaining that geometry. Whether you are operating in construction, mining, or long‑haul transport, The part provides the durability and precision you need. Regular inspection and timely replacement of The part will prevent steering play, uneven tyre wear, and costly alignment issues. Trust our HOWO8x4first axle steer tie rod to keep your HOWO A7 8X4 steering true and responsive for millions of kilometres.
The Pull level assembly（Φ50） is the complete steering tie rod assembly for the first axle, featuring a 50 mm diameter tube and integrated ball joints. This assembly is the core component of The part, providing the necessary length and adjustability for correct toe‑in settings. Its forged ends and high‑strength steel construction ensure that The part resists bending and fatigue under heavy loads.
This assembly includes both inner and outer tie rod ends, with grease fittings for regular lubrication. The part’s ball joints are designed to handle the angular movement of the steering knuckles while maintaining low friction. The Pull level assembly（Φ50） is factory‑set to the correct length, but it also features an adjustable sleeve to allow fine‑tuning of toe alignment during service. With proper maintenance, The part will deliver consistent steering performance throughout its service life.
When replacing your steering linkage, choosing the genuine Pull level assembly（Φ50） ensures that your HOWO8x4first axle steer tie rod matches the original quality and fitment. This assembly is tested for durability and precision, giving you confidence in the safety and handling of your HOWO A7 8X4. The part is an essential part of any steering system overhaul, and our Pull level assembly（Φ50） provides the reliability you expect from howo Parts.
| Part NO. | Description |
|---|---|
| AZ9731430050 | Pull level assembly（Φ50） |
Our HOWO8x4first axle steer tie rod is manufactured to the exact original equipment specifications, ensuring a perfect fit and consistent steering geometry. We use high‑grade steel and precision forging to produce a HOWO8x4first axle steer tie rod that matches the strength and durability of the factory part.
The part features precision‑machined ball joints and a rigid tube that eliminates flex, providing immediate and accurate steering input. This translates to better driver control and reduced steering play, enhancing overall vehicle safety and handling.
Our HOWO8x4first axle steer tie rod is supplied as a complete assembly with all necessary hardware. The adjustable sleeve allows for quick toe‑in alignment during installation, saving time and reducing workshop costs. The part is designed for straightforward replacement.
We keep a large stock of HOWO8x4first axle steer tie rods to ensure fast delivery worldwide. Our technical team provides installation guidance and alignment recommendations, helping you get the most from your HOWO8x4first axle steer tie rod.
The part is the essential link between the steering gear and the wheel knuckles. It transmits steering force from the driver to the wheels, while maintaining the correct toe angle for straight‑line stability and cornering grip. A worn or damaged HOWO8x4first axle steer tie rod can cause steering wander, excessive tyre wear, and even loss of control. Regular inspection and timely replacement of The part are vital for safe operation.
The part is subjected to continuous stress from road impacts, cornering forces, and steering inputs. Our HOWO8x4first axle steer tie rod is constructed from heat‑treated alloy steel and features heavy‑duty ball joints that resist wear and corrosion. The 50 mm diameter tube provides exceptional rigidity, ensuring that The part maintains its geometry even under the most demanding conditions.
When installing The part, always replace the castle nuts and cotter pins with new ones. Torque the ball joint nuts to the specified value and ensure the tie rod ends are fully seated. After installation, adjust the toe‑in to the factory recommended setting using the adjustable sleeve. Regular greasing of The part ball joints will extend its service life significantly.
We recommend inspecting The part every 50,000 km. Check for excessive play in the ball joints, damaged boots, and any signs of bending or cracking. If you notice steering vagueness or uneven tyre wear, have The part inspected immediately. Replacing a worn HOWO8x4first axle steer tie rod is far more cost‑effective than replacing tyres or repairing steering components.
Our HOWO8x4first axle steer tie rod is specifically designed for the first axle of the HOWO A7 8X4 chassis, with the correct length, thread sizes, and ball joint taper to match the original steering knuckles and steering arm. This ensures a perfect fit and eliminates the need for modifications.
Each HOWO8x4first axle steer tie rod undergoes 100% inspection, including dimensional checks, hardness testing, and ball joint torque verification. We provide a comprehensive warranty against material and workmanship defects, giving you full confidence in your purchase.
We maintain a substantial inventory of HOWO8x4first axle steer tie rods to support fleet maintenance and urgent repairs. Bulk orders are available with competitive pricing and fast shipping. Contact our sales team for custom orders or special requirements.
Investing in a genuine HOWO8x4first axle steer tie rod prevents premature tyre wear, reduces fuel consumption due to correct alignment, and minimises steering system repairs. The durable construction ensures that The part outlasts cheaper aftermarket alternatives, delivering lower total cost of ownership.
Aftermarket tie rods often have inferior ball joints and softer steel, leading to rapid wear and steering issues. Our HOWO8x4first axle steer tie rod is built to the same rigorous standards as the original equipment, ensuring consistent performance and safety. Trust The part from howo Parts for your HOWO A7 8X4.
The part is the key to maintaining correct toe‑in, which directly affects tyre life and vehicle stability. A correctly adjusted HOWO8x4first axle steer tie rod ensures that both front wheels point in the same direction, reducing rolling resistance and improving fuel economy. Regular alignment checks, combined with a healthy HOWO8x4first axle steer tie rod, will keep your truck running straight and true.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
