The Half-High Roof Lining Perimeter Fitting is a comprehensive set of interior trim components designed to provide a finished, professional appearance for the roof area of the Sitrak C7H half-high cab.
This essential kit includes all decorative panels, brackets, guards, handles, and fasteners required to complete the roof lining perimeter. Every component is precision-engineered to match the original vehicle specifications, ensuring a perfect fit and seamless integration with the cab interior.
The Half-High Roof Lining Perimeter Fitting not only enhances the aesthetic appeal of the cabin but also provides functional benefits such as improved noise insulation and secure mounting for accessories. Each part is manufactured from high-quality, UV-stabilized materials that resist fading, cracking, and warping over time.
For complete technical specifications and ordering details, please refer to the official Sinotruk Catalog, which provides comprehensive information on all available variants and compatible truck models.
The Half-High Roof Lining Perimeter Fitting is the ideal choice for owners seeking to restore or upgrade the roof interior of their C7H, ensuring a factory-fresh appearance and lasting durability. This Half-High Roof Lining Perimeter Fitting set delivers everything needed for a complete professional installation.
This decorative panel covers the left rear corner of the roof lining, providing a smooth, finished surface. It is molded from impact-resistant ABS with a textured grain that matches the original interior. The panel includes integrated clip slots for secure attachment without visible fasteners.
Symmetric to the left, this trim piece completes the rear roof perimeter on the right side. It shares the same high-quality material and finish, ensuring visual balance and a professional look. The panel is designed to accommodate the cab’s rear lighting and storage compartments.
These robust clips are used to secure the trim panels to the roof structure. The claw design provides a strong grip that resists vibration and prevents rattling. Made from spring steel with a corrosion-resistant coating, they ensure long-lasting retention.
This long trim piece runs along the left side of the roof, bridging the front and rear sections. It features a low-profile design that seamlessly integrates with the headliner. The trim is pre-drilled for mounting accessories such as grab handles and sun visors.
This bracket provides structural support for the rear roof sealing area on the left side. It is stamped from galvanized steel and includes rubber isolators to dampen vibration. The bracket ensures that the rear trim panels remain securely aligned.
Symmetric to the left, this bracket supports the right rear sealing area. It shares the same durable construction and corrosion protection. Together, both brackets provide a stable base for the rear trim panels.
This guard plate protects the front right roof sealing area from damage. It is made from impact-resistant plastic with a smooth finish. The plate also conceals wiring and fasteners, providing a clean appearance.
This is the left-side counterpart, offering identical protection and aesthetics. It is designed to fit perfectly around the front roof pillar, ensuring a seamless integration with the cab interior.
This trim piece covers the front left area of the roof lining, providing a decorative and functional finish. It includes integrated mounting points for overhead consoles and lighting fixtures.
Symmetric to the left, this trim completes the front perimeter on the right side. It shares the same material and color, ensuring a uniform appearance across the roof lining.
This frame protects the left curtain rail and provides a finished edge for the roof lining. It is made from durable plastic with a brushed metal look, adding a touch of elegance to the interior.
This is the right-side counterpart, offering the same protection and style. Both frames ensure that the curtain rails are securely housed and visually integrated with the roof lining.
This sturdy handle provides a secure grip for passengers entering or exiting the cab. It is manufactured from reinforced nylon with a textured grip surface and is designed to withstand heavy loads. The handle includes integrated mounting points for easy installation.
This self-retaining nut provides a strong threaded hole in thin sheet metal. It is designed for ST4.2 screws and features a spring-loaded cage that holds the nut securely in place during assembly.
This pre-assembled fastener combines a cross recessed pan head tapping screw with a flat washer. It is used to secure trim panels and brackets, providing a flush finish and even load distribution.
This long tapping screw is designed for securing heavy components, such as brackets and supports. The limit feature prevents over-tightening, ensuring consistent clamping force without damaging the material.
This holder provides a threaded insert for ST4.8 screws in plastic panels. It is molded from high-strength nylon with a ribbed outer surface that locks into place, preventing rotation and pull-out.
This standard tapping screw is used for general fastening of lightweight trim components. The cross recess allows for easy driving with a standard screwdriver, and the zinc-plated finish resists corrosion.
This assembly includes a pan head screw and a flat washer pre-installed, simplifying installation and ensuring even pressure distribution. It is ideal for securing panels where a flat bearing surface is required.
Similar to the ST4,2-4 version but with a different cage width, this spring nut is used in tighter spaces. It provides a reliable threaded fastening point for ST4.2 screws in sheet metal applications.
This cover conceals the mounting hardware of the grab handle, providing a clean, finished appearance. It snaps securely over the handle base and matches the interior trim color and texture.
The Half-High Roof Lining Perimeter Fitting includes every trim panel, bracket, guard, handle, and fastener required for a full installation. This eliminates the need for additional purchases and ensures compatibility between all parts, saving time and effort during assembly.
Every component in this kit is manufactured to the exact specifications of the original Sitrak C7H parts. This guarantees a flawless fit and seamless integration with the existing cab structure, ensuring that all trim lines match perfectly and that the final result looks factory-original.
The Half-High Roof Lining Perimeter Fitting includes all required clips, screws, nuts, and holders, making installation straightforward with basic hand tools. The pre-assembled fasteners and self-retaining nuts simplify the process, reducing installation time and ensuring a secure, rattle-free result.
All trim panels and components are fabricated from high-impact, UV-stabilized plastics and corrosion-resistant metals. This ensures that the Half-High Roof Lining Perimeter Fitting maintains its appearance and functionality over years of exposure to sunlight, temperature changes, and vibration, providing excellent value for money.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
