The part is an essential component for maintaining the performance and longevity of the Sitrak C7H diesel engine. This comprehensive kit includes the main filter assembly and all necessary piping, fittings, brackets, and hardware for a complete fuel filtration system installation or overhaul.
This complete Fuel Filter kit includes The part, Single-Way Pipe Clamp, Hexagon Flange Bolt Q186-M8X16-10.9-MAN183-B1, Fuel Filter Bracket, Hollow Bolt, Composite Sealing Washer, Ring Connector, T-Connector, Return Pipe (Injector-Pressure Limiting Valve), Screw-in Fitting, Return Pipe (Pressure Limiting Valve-Reducing Fitting), Fixing Clamp, Washer, Non-Return Valve Bracket, Hexagon Flange Bolt Q186-M8X20-10.9-MAN183-B1, Fixing Clamp D1-25X15-W3-EPDMWWCR, Washer GB/T97.1-6-MAN183-B1, Hexagon Flange Bolt Q186-M6X16-10.9-MAN183-B1, Ferrule Straight Fitting M14X1,5-NW10, Fuel Line (Fuel Pump Inlet), Fuel Line Cap, Snap-in Pipe Clamp, Screw Plug M14X1,5-ST-M3360-RK10-K, Return Pipe, Screw-in Straight Fitting NG12 M14X1,5/SV246NX, Fuel Return Line Cap, Fuel Line (Fuel Pump-Filter), Fuel Line (Filter-High Pressure Pump), and Hexagon Flange Bolt Q186-M8X40-10.9-MAN183-B1. Every component of this Fuel Filter is engineered to OEM specifications for a perfect fit and reliable performance.
For complete technical specifications and ordering details, please refer to the official Sinotruk Catalog, which provides comprehensive information on all available variants and compatible truck models for The part.
Whether you are replacing a clogged fuel filter or upgrading the entire fuel delivery system, this Fuel Filter kit delivers factory-quality components and a straightforward installation. This Fuel Filter is the definitive choice for operators who demand clean fuel delivery and long-term durability.
The primary filtration unit in this Fuel Filter kit, featuring a high-efficiency filter element with integrated primer pump. It removes contaminants down to 5 microns, protecting the high-pressure fuel system from wear and ensuring optimal engine performance. The upgraded filter element offers extended service intervals and improved dirt-holding capacity.
This clamp secures a single fuel line in The part system, preventing movement and chafing. It is made of zinc-plated steel with a rubber-lined cushion, providing secure retention and vibration damping.
These short M8 flange bolts are used for securing small brackets and components in The part system. Grade 10.9 with a zinc-nickel coating, they provide reliable fastening in confined spaces.
This stamped steel bracket securely mounts The part to the engine or chassis. In The part system, it includes rubber isolation mounts to reduce vibration and is coated for corrosion resistance.
This hollow bolt is used for fuel line connections in The part system, allowing fuel to flow through the center while securing the fitting. It features a hexagon head and is made of corrosion-resistant steel.
This sealing washer provides a leak-proof seal for threaded connections in The part system. Featuring a steel core with an FPM rubber coating, it withstands fuel and temperatures up to 150°C.
This ring connector joins two sections of fuel line in The part system. It is made of brass with a nickel plating, featuring barbed ends for secure hose retention.
This T-shaped connector splits the fuel line in The part system, directing flow to multiple components. Made of brass with a nickel plating, it provides a leak-free connection for fuel distribution.
This pipe carries excess fuel from the injectors back to the pressure limiting valve. In the Fuel Filter system, it is made of steel with a corrosion-resistant coating and features precision-formed ends for secure connections.
This threaded fitting connects a fuel line to the filter housing. In the Fuel Filter system, it features a hexagon drive and a pre-applied thread sealant for leak-free sealing.
This pipe carries fuel from the pressure limiting valve to the reducing fitting. In the Fuel Filter system, it is identical in construction to the other return pipes but with a different routing.
This small clamp secures a fuel line or wire harness in the Fuel Filter system. It is made of EPDM rubber with a steel insert, providing a secure hold and vibration isolation.
This hardened flat washer distributes load under the M8 bolt head. In the Fuel Filter system, it prevents galling and ensures even clamping pressure on brackets and components.
This bracket supports the non-return valve in the Fuel Filter system. It is made of galvanized steel with a rubber-lined clamp, providing secure mounting and vibration damping.
These M8 flange bolts are used for securing brackets in the Fuel Filter system. Grade 10.9 with a zinc-nickel coating, they provide reliable fastening and corrosion resistance.
This larger clamp secures thicker fuel lines in the Fuel Filter system. Made of EPDM rubber with a steel insert and a width of 25mm, it provides a secure hold for larger-diameter lines.
This flat washer is used under M6 bolt heads in the Fuel Filter system. It provides load distribution and prevents surface damage to brackets and components.
These M6 flange bolts are used for securing small brackets and components. Grade 10.9 with a zinc-nickel coating, they provide reliable fastening in the Fuel Filter system.
This fitting connects a fuel line to a component in the Fuel Filter system. With a M14X1.5 thread and NW10 size, it features a ferrule compression seal for leak-free connections.
This flexible fuel line carries fuel from the tank to the fuel pump. In the Fuel Filter system, it is made of reinforced rubber with a 10mm inner diameter, resistant to diesel and biodiesel.
This cap seals the end of a fuel line during transport or storage. In the Fuel Filter system, it is made of rubber with a snap-fit design, preventing contaminants from entering the line.
This clamp secures a fuel line to the chassis or bracket in the Fuel Filter system. It features a quick-release design and a rubber-lined cushion to prevent chafing.
This screw plug seals a port in the Fuel Filter system. It features a hexagon socket drive and a zinc-plated finish, with a pre-applied thread sealant for leak-free sealing.
This pipe carries excess fuel back to the tank. In the Fuel Filter system, it is made of steel with a corrosion-resistant coating and is routed to avoid heat sources and moving parts.
This straight fitting connects a fuel line to a component in the Fuel Filter system. With a NG12 size and M14X1.5 thread, it features a pre-applied sealant for leak-free connections.
This cap seals the fuel return line opening. In the Fuel Filter system, it is made of rubber with a snap-fit design, preventing contamination and fuel leakage.
This line carries fuel from the pump to the filter. In the Fuel Filter system, it is made of reinforced rubber with a 12mm inner diameter, designed for high-pressure fuel delivery.
This line carries filtered fuel from the filter to the high-pressure pump. In the Fuel Filter system, it is made of high-pressure rated rubber hose with reinforced construction.
This longer M8 flange bolt is used for securing the main filter bracket. Grade 10.9 with a zinc-nickel coating, it provides high clamping force for deep mounting points in the Fuel Filter system.
The Fuel Filter removes contaminants down to 5 microns, protecting the high-pressure fuel system from abrasive wear. This ensures reliable engine performance, reduces the risk of injector failure, and extends the service life of the entire fuel system.
This Fuel Filter kit includes every component required for a full installation – the main filter, all brackets, clamps, fittings, lines, and fasteners. The all-in-one solution simplifies installation and ensures compatibility, saving time and reducing the risk of missing parts.
The Fuel Filter uses high-quality sealing washers, O-rings, and precision fittings that provide a positive seal against fuel pressure. This prevents air ingress and fuel leaks, ensuring consistent fuel delivery and optimal engine performance.
The Fuel Filter is manufactured to the exact OEM specifications, guaranteeing a perfect fit on the Sitrak C7H. The precision-formed pipes and correctly positioned mounting holes ensure a hassle-free installation, reducing the risk of fuel leaks or system failures.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
