The part is a critical structural component that reinforces the front section of the Sitrak C7H cab, providing essential rigidity and support to the front body panels and mounting points.
This Front Cross Member of the Cab is engineered to withstand torsional and bending loads, ensuring the cab maintains its shape and integrity during operation, and is a direct replacement for the original factory part.
For detailed fitment and compatibility information, please refer to the Sinotruk Catalog.
This Front Cross Member of the Cab is a genuine OEM‑grade part, ensuring a perfect fit and long‑term reliability for your Sitrak C7H, and is available for immediate worldwide delivery.
The Front connecting cross member assembly is the main beam that connects the left and right side structures of the cab.
This Front Cross Member of the Cab component is fabricated from high‑strength steel with a durable corrosion‑resistant coating.
Its design incorporates precise mounting holes and reinforcements to distribute loads evenly across the cab front.
The assembly is pre‑formed to match the exact contours of the C7H cab, ensuring a seamless fit during installation.
This Front Cross Member of the Cab provides the foundation for mounting the front grille, headlamps, and cooling modules.
Its robust construction minimizes flex and vibration, contributing to a quieter and more stable cabin environment.
Replacing a damaged or corroded cross member with this genuine part restores the cab’s structural integrity.
The Spacer block is a precision‑machined component that sits between the cross member and the cab body.
This Front Cross Member of the Cab part ensures correct alignment and provides a solid bearing surface for the mounting bolts.
Made from durable steel with a protective finish, the spacer block resists crushing and deformation under clamping force.
It also helps to dampen vibration and reduce noise transmission between the cross member and the cab shell.
Two spacer blocks are included, providing symmetrical support on both sides of The part.
Installation of the spacer blocks is straightforward, and they are essential for achieving the correct clamping force.
Using genuine spacer blocks ensures that The part remains securely attached over time.
The Hex flange face bolt with teeth M10 is a high‑strength fastener used to secure The part.
Its flange face provides a built‑in washer that distributes the clamping load evenly, preventing damage to the components.
The serrated teeth under the head bite into the mating surface, offering superior vibration resistance and locking action.
Made from grade 10.9 steel with a zinc‑plated finish, this bolt guarantees excellent tensile strength and corrosion protection.
The M10 thread size is standard for this application, ensuring compatibility with the original mounting points.
Four bolts are supplied, matching the number of mounting points for a complete installation of The part.
Using the correct bolts is critical for maintaining the structural integrity of The part.
| NO. | Part NO. | Name |
|---|---|---|
| 1 | 811W62821-5499 | Front connecting cross member assembly |
| 2 | 810W62821-0027 | Spacer block |
| 3 | ZQ1801080TF6 | Hex flange face bolt with teeth M10 |
Our Front Cross Member of the Cab is manufactured from high‑strength steel to provide maximum rigidity and crash resistance.
This ensures that the cab remains stable and safe, even under extreme driving conditions.
Every component of The part is engineered to exact OEM dimensions, guaranteeing a perfect fit.
Installation is quick and hassle‑free, with all mounting holes aligning correctly with the cab’s structure.
The part kit includes all necessary bolts and spacer blocks, so no extra parts are required.
This simplifies the replacement process and reduces the chance of missing components.
We stock The part in large quantities to ensure fast delivery worldwide.
Our support team is ready to assist with any questions regarding The part installation.
The part is vital for maintaining the cab’s structural alignment and supporting the front body panels.
It also serves as the mounting base for the radiator, condenser, and front lighting systems.
A damaged or corroded cross member can compromise the fit of these components and lead to misalignment.
Replacing it with our genuine Front Cross Member of the Cab restores the original strength and alignment of the front structure.
Regular inspection of The part is recommended to detect any signs of fatigue or corrosion early.
The part is coated with a high‑quality anti‑corrosion treatment that resists rust and environmental damage.
This ensures that the cross member remains structurally sound even when exposed to road salts, moisture, and temperature variations.
The bolts and spacer blocks are also treated to prevent seizing, making future removal of The part easier.
This durability ensures that The part provides a lifetime of reliable service.
To install The part, first position the cross member against the cab front and align the holes.
Place the spacer blocks between the cross member and the cab body, then insert the hex flange bolts and tighten them evenly.
Torque the bolts to the manufacturer’s specifications to achieve the correct clamping force on The part.
Always use new bolts and spacer blocks when replacing The part to ensure optimal performance.
Inspect The part periodically for signs of rust, cracks, or deformation.
Clean the area to remove dirt and moisture that could accelerate corrosion.
If any damage is found, replace The part immediately to prevent further issues.
Proper maintenance of The part extends the life of the entire cab structure.
This Front Cross Member of the Cab is designed for the Sitrak C7H, fitting both standard and wide‑body cab variants.
It is compatible with all years and engine configurations that use the same cab front mounting points.
The part numbers match the original equipment, ensuring a direct replacement for The part.
Verify your vehicle’s specifications to confirm that this Front Cross Member of the Cab is the correct fit.
Each Front Cross Member of the Cab is tested for dimensional accuracy, material strength, and coating quality.
We simulate real‑world load conditions to ensure that The part performs reliably in service.
Our quality control process includes visual inspection and verification of all critical dimensions.
We back The part with a comprehensive warranty against manufacturing defects.
We maintain a large inventory of Front Cross Member of the Cab kits to ensure prompt dispatch of your order.
Most orders are processed within 24 hours, and tracking information is provided for every shipment.
Our global logistics network ensures that your Front Cross Member of the Cab arrives quickly, minimizing vehicle downtime.
Expedited shipping options are available for urgent repairs involving The part.
Replacing a worn or damaged Front Cross Member of the Cab with our genuine part is a cost‑effective decision.
It prevents misalignment of front body panels and ensures proper fitment of cooling and lighting modules.
The durable construction of The part means it will not need frequent replacement.
Choosing our Front Cross Member of the Cab offers excellent long‑term value for your fleet.
Aftermarket cross members often use thinner steel and inferior coatings, leading to premature rusting and failure.
Our Front Cross Member of the Cab is manufactured to the same standards as the original equipment, ensuring reliability.
By choosing our genuine Front Cross Member of the Cab, you avoid the risks associated with substandard parts.
Trust our Front Cross Member of the Cab to provide the same performance and longevity as the factory‑installed component.
A correctly installed Front Cross Member of the Cab contributes to the overall crashworthiness of the vehicle.
It helps to absorb and distribute impact forces in the event of a frontal collision.
Our Front Cross Member of the Cab meets all relevant safety standards for commercial vehicle structural components.
Regular inspection of The part is essential to ensure continued compliance and safety.
Our Front Cross Member of the Cab is produced using modern stamping and welding techniques for consistent quality.
Robotic welding ensures strong, uniform joints that resist fatigue and cracking.
The coating process uses eco‑friendly materials that provide excellent adhesion and corrosion protection.
This advanced manufacturing guarantees that every Front Cross Member of the Cab meets our high quality standards.
A properly fitted Front Cross Member of the Cab reduces flex and vibration, leading to a quieter and more comfortable cabin.
It also ensures that doors and panels align correctly, preventing wind noise and water leaks.
The improved structural rigidity enhances the overall driving experience for the operator.
The part is a key component in maintaining the cab’s premium feel and durability.
We are committed to providing the highest quality Front Cross Member of the Cab and supporting our customers.
If you have any questions or encounter any issues, our team is ready to assist you promptly.
Your satisfaction is our priority, and we strive to exceed your expectations with every order.
Choose our Front Cross Member of the Cab for a reliable, durable, and genuine solution for your Sitrak C7H.
Our online catalog provides comprehensive access to genuine SINOTRUK parts for all major vehicle lines — including HOWO, Sitrak, Steyr, and Yellow River series trucks. You can browse detailed specifications, original part numbers, and exploded-view diagrams for every assembly. Whether you are performing routine maintenance or planning a major overhaul, the catalog helps you quickly identify the correct components for your vehicle. When you become a SINOTRUK customer, we offer complimentary full‑access catalog services, ensuring you always have the latest product data and interchangeability information at your fingertips to support efficient fleet management and accurate parts ordering.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
