

Your Sitrak truck works hard every day, and the 811W61243-5431 Rear Fender Bracket Assembly is the genuine factory component that keeps your rear fenders firmly supported, properly aligned, and protected from vibration and road abuse. This precision-engineered bracket assembly delivers rock-solid mounting strength, prevents fender sagging, and maintains the clean, professional appearance your truck deserves. As a dedicated supplier of Sitrak truck parts, we understand how much a sturdy fender bracket contributes to vehicle durability and driver pride. Whether you operate a C7H, a C5H, or another dependable Sitrak model, replacing a worn or damaged bracket with the 811W61243-5431 restores the precise fit and dependable performance your truck was engineered to deliver mile after mile.
Rear fenders take a constant beating from road debris, mud, and vibration. Without a strong bracket holding them firmly in place, they begin to sag, rattle, and rub against tires or body panels. That friction damages paint, accelerates rust, and creates irritating noises. The 811W61243-5431 Rear Fender Bracket Assembly restores rigid support, keeping your fenders exactly where they belong and protecting your truck’s bodywork from unnecessary wear.
A loose fender bracket transmits vibration throughout the rear of your truck, creating rattles and buzzing noises that make every drive feel less refined. The 811W61243-5431 is manufactured to exact tolerances, so it mounts tightly and dampens vibration the way the original part did. The result is a noticeably quieter, smoother ride that reduces driver fatigue and makes long hauls far more enjoyable.
Genuine OEM Construction
Manufactured to exact Sitrak specifications, the 811W61243-5431 matches the original dimensions, material grade, and mounting points perfectly. You receive the same dependable quality that came with your truck from the factory.
High-Strength Steel Construction
Built from durable, load-resistant steel, this bracket assembly withstands heavy vibration and constant road abuse without bending, cracking, or deforming. It keeps its shape and support mile after mile.
Straightforward Installation
The 811W61243-5431 installs as a direct replacement with no modification required. Basic hand tools and a modest amount of time are all you need to complete the job properly.
Corrosion-Resistant Finish
The protective coating resists rust, road salt, and chemical exposure, ensuring the bracket maintains its strength and appearance through every season and every climate.
| Parameter | Specification |
|---|---|
| OEM Number | 811W61243-5431 |
| Product Name | Rear Fender Bracket Assembly |
| Brand | Sitrak |
| Material | High-Strength Steel |
| Position | Rear Fender Mounting Point |
| Finish | Anti-Corrosion Coating |
| Installation | Direct Fit, No Modification |
| Warranty | 12 Months |
Fits Popular Sitrak Models
This rear fender bracket assembly suits a broad range of Sitrak trucks, including the C7H, C5H, and other variants that use the same rear fender mounting configuration. Fleet operators value that one part number covers multiple vehicles, simplifying inventory and reducing downtime.
Precision Engineering You Can Trust
Every unit is produced to exact original dimensions, so it seats correctly and maintains the precise alignment your fenders require. No gaps, no guesswork, and no unpleasant surprises during installation.
Step 1: Safely Prepare the Vehicle
Park on a level surface and engage the parking brake. If the bracket is located underneath the truck, lift it with a proper jack and support it securely on stands before beginning work.
Step 2: Remove the Old Bracket
Locate the worn bracket assembly and remove any retaining bolts or fasteners. Take note of the orientation and any spacers so you can reassemble everything correctly.
Step 3: Install the New 811W61243-5431
Position the new bracket assembly in the same orientation as the original. Reinstall the retaining hardware and tighten it to the manufacturer’s recommended torque specification.
Step 4: Verify and Test
Check that all fasteners are tight and the fender sits securely against the bracket. Lower the truck and take a short test drive to confirm there are no rattles or unusual vibrations.
Inspect Periodically
Check the bracket during routine maintenance. Look for cracks, bending, or loose fasteners. Catching small issues early prevents fender sagging and larger structural problems.
Keep It Clean
Wash away mud, salt, and grime with water during regular cleaning. A clean bracket is easier to inspect and less likely to suffer from corrosion over time.
Check Fastener Torque
Verify that retaining hardware remains tight at the recommended torque. Vibration can loosen fasteners over time, so a quick check adds confidence and safety.
Address Changes Promptly
If you notice new vibrations, rattles, or fender movement, inspect the bracket immediately. Replacing a worn 811W61243-5431 early protects your fenders and bodywork.
Save Money on Body Repairs
A failing bracket allows fenders to rub and damage paint, leading to rust and expensive bodywork. By replacing it early with the genuine 811W61243-5431, you avoid secondary damage and keep your maintenance budget under control.
Gain Confidence and Professional Pride
A truck with secure, well-aligned fenders looks cared for and professional. You feel proud behind the wheel, clients notice the difference, and your truck holds its value far better over time.
Is this a genuine Sitrak bracket assembly?
Yes. The 811W61243-5431 is produced to original equipment specifications and meets the fitment, strength, and durability standards that Sitrak trucks require.
How do I know if my bracket needs replacing?
Common signs include fender sagging, new rattles, visible cracks or bending, and loose fasteners. When in doubt, replace it with the 811W61243-5431.
Does installation require special tools?
No special tools are required. Standard hand tools and a torque wrench are sufficient. Most owners complete the job in under an hour with basic mechanical skills.
How long will this bracket last?
With normal use and periodic inspection, the 811W61243-5431 delivers many years of dependable service. Its high-strength steel and corrosion-resistant finish resist environmental damage far better than cheap alternatives.
Do not let a worn bracket ruin your fenders and damage your truck’s appearance. The 811W61243-5431 Rear Fender Bracket Assembly restores rigid support, eliminates vibration, and protects your bodywork from costly damage. It is a small, affordable part that delivers an outsized improvement in durability and professional pride.
Take pride in your truck and give it the genuine quality it deserves. Order the 811W61243-5431 today and experience the confidence that comes from a chassis working exactly as the factory intended. Your truck will reward you with secure fenders, fewer repairs, and many years of dependable service.