810W97122-6112 Right Locking Pin Assembly (Symmetrical With Left Piece)- 1
Genuine Sitrak 810W97122-6112 Right Locking Pin Assembly – Unbreakable Security, Effortless Operation, and Total Peace of Mind for Your Truck
2026-09-30
811W62680-6142 Right Lock Body Assembly - 1
Genuine Sitrak 811W62680-6142 Right Lock Body Assembly – Unbreakable Security, Effortless Operation, and Total Peace of Mind for Your Truck
2026-09-30

Genuine Sitrak 810W97006-0033 Gas Spring Assembly – The Ultimate Lift Support for Effortless Access, Lasting Strength, and Total Driving Confidence

The 810W97006-0033 Gas Spring Assembly is a genuine Sitrak component engineered to deliver flawless lifting support for your truck’s hood, cabin, or storage compartments. This precision gas spring restores smooth, controlled motion and eliminates the strain of manual lifting. As a dedicated supplier of Sitrak truck parts, we understand that a quality gas spring is essential for daily convenience and safety. Whether you operate a C7H, C5H, or another dependable Sitrak model, replacing a worn gas spring with the 810W97006-0033 brings back the effortless operation your truck was built to provide. With upper M6 and lower M8 mounting points, this assembly fits perfectly and performs reliably mile after mile.

810W97006-0033 Gas Spring Assembly
Gas Spring Assembly
810W97006-0033 Газовая пружина в сборе
Газовая пружина в сборе
810W97006-0033 Conjunto de resorte de gas
Conjunto de resorte de gas

Why the 810W97006-0033 Gas Spring Assembly Is Essential for Your Sitrak

Restore Effortless Lifting with the 810W97006-0033

Gas springs do the heavy lifting so you don’t have to. When the original spring loses pressure or fails completely, hoods and cabin components become dangerously heavy. You struggle to open them, risk injury, and may even damage the vehicle. The 810W97006-0033 Gas Spring Assembly restores that smooth, assisted motion with precisely calibrated force. It holds components securely in the open position and allows them to close gently, protecting both you and your truck.

Enhance Safety and Convenience with the 810W97006-0033

A worn gas spring can drop unexpectedly, causing serious injury or costly damage. The 810W97006-0033 is manufactured to exact factory specifications, so it delivers consistent, reliable support every time. You gain peace of mind knowing that your hood or compartment will stay exactly where you put it, and you can work under it safely without fear of sudden collapse.

Outstanding Features of the 810W97006-0033 Gas Spring Assembly

Genuine OEM Construction

Manufactured to exact Sitrak specifications, the 810W97006-0033 matches the original dimensions, force rating, and mounting points. You receive the same dependable quality that came with your truck from the factory.

High-Strength Construction

Built from durable steel and a precision-sealed cylinder, this gas spring withstands extreme temperatures and constant use without losing pressure or performance. It keeps working reliably mile after mile.

Straightforward Installation

The 810W97006-0033 installs as a direct replacement with no modification required. Upper M6 and lower M8 threads match factory mounts. Basic hand tools and a few minutes are all you need.

Corrosion-Resistant Finish

The protective coating resists rust, moisture, and chemical exposure, ensuring the spring maintains its strength and smooth operation through every season and every climate.

Technical Specifications of the 810W97006-0033

Parameter Specification
OEM Number810W97006-0033
Product NameGas Spring Assembly
BrandSitrak
Upper MountM6 Thread
Lower MountM8 Thread
MaterialSteel / Sealed Gas Cylinder
InstallationDirect Fit, No Modification
Warranty12 Months

Compatibility and Fitment for the 810W97006-0033

Fits Popular Sitrak Models

This gas spring assembly suits a broad range of Sitrak trucks, including the C7H, C5H, and other variants that use the same mounting configuration. Fleet operators value that one part number covers multiple vehicles, simplifying inventory and cutting downtime.

Precision Engineering You Can Trust

Every unit is produced to exact original dimensions, so it mounts correctly and delivers the precise force needed for smooth operation. No guesswork, no adapters, and no unpleasant surprises during installation.

Step-by-Step Installation of the 810W97006-0033

Step 1: Safely Support the Component

Before removing the old gas spring, support the hood or compartment with a sturdy prop or a helper. Never rely on a worn spring to hold the weight while you work.

Step 2: Remove the Old Spring

Loosen the upper and lower mounting fasteners. Carefully detach the old gas spring from both ends, taking note of the orientation and any washers or spacers used.

Step 3: Install the New 810W97006-0033

Position the new gas spring in the same orientation as the original. Attach the M6 upper mount and M8 lower mount, then tighten the fasteners securely but do not overtighten.

Step 4: Test the Operation

Remove the support and test the gas spring by opening and closing the component several times. It should lift smoothly and hold firmly in the open position without any binding or unusual noises.

Care and Maintenance for the 810W97006-0033

Inspect Periodically

Check the gas spring during routine maintenance. Look for oil residue, corrosion, or loss of lifting force. Catching small issues early prevents sudden failure and keeps you safe.

Keep It Clean

Wipe the cylinder and rod with a soft, damp cloth to remove dust and grime. Avoid harsh chemicals that could damage the seals and cause the gas to leak out over time.

Check Mounting Hardware

Verify that the M6 and M8 fasteners remain tight. Vibration can loosen them over time, so a quick check ensures the gas spring stays securely attached and operates correctly.

Address Weakness Promptly

If the gas spring no longer holds the component open or requires excessive force to lift, replace it immediately with the 810W97006-0033. A failing spring is a safety hazard.

Real Benefits of the 810W97006-0033 Gas Spring Assembly

Save Money on Repairs and Injury

A failed gas spring can cause the hood to slam shut, damaging the vehicle and potentially injuring you. By replacing it early with the genuine 810W97006-0033, you avoid costly bodywork and protect yourself from harm. It is a small investment with a huge safety payoff.

Gain Confidence and Daily Convenience

A gas spring that works smoothly every time makes your daily routine easier and more enjoyable. You feel more confident working on your truck, your passengers appreciate the effortless access, and your professional pride grows with every easy lift.

Frequently Asked Questions About the 810W97006-0033

Is this a genuine Sitrak gas spring assembly?

Yes. The 810W97006-0033 is produced to original equipment specifications and meets the fitment, force rating, and durability standards that Sitrak trucks require.

How do I know if my gas spring needs replacing?

Common signs include difficulty lifting the component, failure to hold it open, oil residue on the cylinder, and unusual noises during operation. When in doubt, replace it with the 810W97006-0033.

Does installation require special tools?

No special tools are required. Standard hand tools for M6 and M8 fasteners are sufficient. Most owners complete the job in under thirty minutes with basic mechanical skills.

How long will this gas spring last?

With normal use and periodic inspection, the 810W97006-0033 delivers many years of dependable service. Its high-strength steel and sealed cylinder resist wear and pressure loss far better than cheap alternatives.

Order Your 810W97006-0033 Gas Spring Assembly Today

Do not let a worn or failing gas spring make your daily tasks difficult and dangerous. The 810W97006-0033 Gas Spring Assembly restores smooth, effortless lifting, dependable support, and the solid feel your Sitrak truck deserves. It is a small, affordable part that delivers a big improvement in safety and convenience.

Take pride in your truck and give it the genuine quality it deserves. Order the 810W97006-0033 today and experience the confidence that comes from a lifting system working exactly as the factory intended. Your truck will reward you with easy access, secure support, and many years of dependable service.

Related Products

Knowledge Of Truck Repair And Maintenance

2026-05-21

Inside the Engine Room: How China National Heavy Duty Truck Group Company Limited Achieved 22.5% Sales Surge to Become the World’s Heavy Truck Champion

Inside the Engine Room: Ho […]
2026-05-21

Inside Africa’s Mining & Construction Boom: Why the Top Howo Parts Supplier Is Powering 150,000 Trucks Annually

Inside Africa’s Mining � […]
2024-08-16

Las Cinco Señales de Advertencia del Eje de Dirección Intermedio del Camión

Las Cinco Señales de Adver […]
2024-08-16

¿Por qué hay un problema con el engranaje de cambio de doce dientes?

¿Por qué hay un problema c […]
2024-08-16

Optimizando la Eficiencia del Combustible en los Camiones Sinotruk: Una Mirada al Sistema de Combustible del Camión

Optimizando la Eficiencia […]
2024-08-16

¿Cómo Puedo Garantizar la Integridad de las Piezas de Repuesto Howo Sinotruk 371 a Través del Cuidado Rutinario?

¿Cómo Puedo Garantizar la […]
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad

Chat with us

We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.