

The YZ952595000042 Right Rear Wheel Cover Assembly is a premium replacement component engineered to protect the rear wheel hub, brake drum, and surrounding chassis components from mud, stones, water spray, and road debris. Manufactured from high‑strength steel with a durable anti‑corrosion coating, this wheel cover assembly delivers exceptional rigidity, impact resistance, and long‑term reliability. As a genuine part of Howo/Sitrak truck parts, the YZ952595000042 is produced to exact OEM specifications, guaranteeing a perfect fit and superior performance in HOWO, SITRAK, and SHACMAN heavy‑duty trucks. Whether you are replacing a bent or rusted cover after a minor collision or restoring proper wheel protection during a chassis overhaul, this assembly provides the strength, precision, and durability required to keep your truck clean, safe, and compliant with road regulations.
The YZ952595000042 is not a simple stamped panel; it is a precision‑engineered wheel cover assembly that combines advanced material selection with exacting manufacturing tolerances. Manufactured from high‑grade cold‑rolled steel, this assembly provides an optimal balance of tensile strength, toughness, and fatigue resistance, ensuring that it can withstand the constant vibration and occasional impacts that heavy‑duty trucks endure. The cover’s geometry is carefully designed to deflect mud, water, and stones away from the wheel hub and brake components, protecting them from contamination and corrosion. Its mounting holes are precisely positioned and drilled to match the OEM pattern, guaranteeing a secure, rattle‑free installation without the need for drilling or modification.
The wheel cover assembly is finished with a durable zinc‑plated coating that provides excellent corrosion resistance, protecting it from road salt, moisture, and debris. The edges are deburred and hemmed to facilitate handling and prevent damage to surrounding components. Every YZ952595000042 is inspected for dimensional accuracy, hole alignment, flatness, and surface finish, ensuring that it meets the strictest OEM standards. This attention to detail guarantees that the right rear wheel cover assembly performs flawlessly, maintaining proper wheel protection and structural integrity over hundreds of thousands of kilometers. Whether your truck operates in construction, mining, or long‑haul applications, this assembly delivers the reliability you need.
High‑Strength Steel – The cold‑rolled steel construction of the YZ952595000042 provides exceptional rigidity, resisting deformation from road debris and impact.
Precision Fit – The mounting holes and overall dimensions are manufactured to exact OEM tolerances, ensuring a perfect fit and proper wheel clearance.
Corrosion Resistance – The zinc‑plated finish protects the assembly from rust and environmental degradation, ensuring long‑term durability.
Splash & Debris Deflection – The cover’s profile effectively channels mud, water, and stones away from the rear wheel hub and brake components.
The YZ952595000042 right rear wheel cover assembly is dimensionally identical to the original equipment part used across a wide range of HOWO, SITRAK, and SHACMAN heavy‑duty trucks. It is specifically designed for the HOWO NX, T5G, T7H, and TX series, as well as compatible SITRAK C7H and G7 models. The assembly’s mounting holes, overall length, thickness, and bend angles match the OEM specifications exactly, ensuring a seamless replacement that requires no drilling, cutting, or modification. By choosing this genuine component, you avoid the risks associated with aftermarket covers that may have incorrect dimensions, poor material quality, or inadequate corrosion protection, which can lead to poor fitment, rust, and premature failure.
The YZ952595000042 has been validated through extensive vibration and durability testing, confirming its ability to maintain structural integrity and proper wheel protection over hundreds of thousands of kilometers. Fleets that have standardized on this wheel cover assembly report fewer chassis‑related complaints, improved vehicle cleanliness, and reduced maintenance costs. Its robust construction ensures dependable service in the harshest operating environments, from dusty construction sites to rainy and snowy highways. The assembly is also compatible with standard mounting hardware, making it a versatile choice for a wide range of repair and restoration projects.
Installing the YZ952595000042 right rear wheel cover assembly is a straightforward process that can be completed with basic hand tools. Begin by disconnecting the negative battery terminal for safety and supporting the rear of the truck with a jack or stands to relieve tension on the mounting points. Carefully remove the old cover by loosening and removing the mounting bolts. Take note of the fastener locations and any shims or spacers that may be present. Clean the mounting surfaces on the chassis and wheel well thoroughly, removing all dirt, rust, and old thread‑locking compound. Inspect the chassis and wheel well for any damage; if any is found, repair it before proceeding.
Position the new YZ952595000042 assembly onto the chassis, aligning the mounting holes with the corresponding threaded inserts. Hand‑start all bolts to ensure proper alignment, then tighten them evenly in a sequential pattern to the manufacturer’s recommended torque. Avoid over‑tightening, as this can distort the cover or strip the threads. Reconnect the battery and lower the truck, checking that the cover sits level and provides adequate clearance for the tire through its full range of suspension travel. Test the assembly for rigidity by gently pushing and pulling on it; if any movement is detected, re‑check the bolt torque and cover alignment. For maintenance, periodically inspect the assembly for signs of corrosion, cracking, or loose fasteners during routine service. With proper installation and care, the YZ952595000042 will provide reliable wheel protection and a professional appearance for years.
Each YZ952595000042 right rear wheel cover assembly is manufactured in an ISO 9001‑certified facility, following strict process controls from raw material to finished product. The cold‑rolled steel is tested for thickness, tensile strength, and chemical composition before stamping. The progressive die tooling ensures consistent geometry and dimensional accuracy across every production run. After forming, each cover is deburred and then zinc‑plated for corrosion protection. A 100% visual inspection is performed to detect surface defects, cracks, or incomplete coating.
Random samples from each batch are subjected to dimensional inspection, hardness testing, and salt‑spray corrosion testing to confirm compliance with OEM standards. A fitment test is performed on a master chassis buck to ensure proper alignment with the wheel well and chassis mounting points. This comprehensive quality assurance guarantees that every YZ952595000042 delivers the same reliable performance as the original OEM component, giving you full confidence in your replacement.
Fleet managers and technicians consistently choose the YZ952595000042 because it delivers reliable wheel protection and long‑term durability at a competitive price. The assembly’s precise fit and high‑quality anti‑corrosion finish eliminate common problems such as misalignment, rust, and vibration that are often associated with cheaper aftermarket parts. Many workshops report a significant reduction in chassis‑related complaints after installing this genuine OEM cover, and drivers appreciate the cleaner, more professional appearance that reflects well on the fleet. The YZ952595000042 is also supplied in robust packaging that protects the assembly during transport and storage, and its clear OEM number simplifies parts identification.
Moreover, the YZ952595000042 is backed by a comprehensive quality guarantee and is supported by our technical team. Its availability through our distribution network ensures fast delivery when you need it most. When you choose this right rear wheel cover assembly, you are selecting a component that has been engineered and tested to the highest standards, offering the perfect balance of protection, appearance, and value. Keep your truck clean and protected with the YZ952595000042.
In summary, the YZ952595000042 Right Rear Wheel Cover Assembly is a premium replacement component that restores your truck’s wheel protection while providing essential shielding for the chassis and rear components. Its exact OEM fitment, high‑strength steel construction, and corrosion‑resistant finish ensure that it meets the demanding requirements of heavy‑duty operation. By investing in this genuine replacement part, you are enhancing the safety, reliability, and appearance of your HOWO, SITRAK, or SHACMAN truck, all while reducing overall maintenance costs.
Don’t compromise on wheel protection or style – choose the YZ952595000042 for your next wheel cover assembly replacement. With its proven track record and widespread acceptance among professionals, this assembly is the smart choice for anyone who values quality, durability, and peace of mind. Keep your truck clean and protected with the YZ952595000042 – the definitive choice for HOWO and SITRAK professionals.