YZ952595000043 Rear Wheel Front Fender – Ultimate Splash Protection & Factory‑Perfect Fit for HOWO Trucks
2026-09-21
YG1671240038 Right Front Foot Pedal Connecting Bracket – Ultimate Strength & Precision for HOWO Truck Cab Access
2026-09-21

YG1671240039 Left Rear Foot Pedal Connecting Bracket – Ultimate Strength & Precision for HOWO Truck Cab Access

The YG1671240039 Left Rear Foot Pedal Connecting Bracket is a precision‑engineered structural component that securely links the left rear foot pedal to the cab floor, ensuring safe, stable, and comfortable driver access. Manufactured from high‑strength steel with a corrosion‑resistant coating, this bracket delivers exceptional rigidity and long‑term durability. As a genuine part of Howo/Sitrak truck parts, the YG1671240039 is produced to exact OEM specifications, guaranteeing a perfect fit and superior performance in HOWO, SITRAK, and SHACMAN heavy‑duty trucks. Whether you are replacing a bent or corroded bracket after a minor incident or restoring proper pedal alignment during a cab repair, this component provides the strength, precision, and reliability required to keep your drivers safe and your fleet operating efficiently.

YG1671240039 Left rear foot pedal connecting bracket
Left rear foot pedal connecting bracket
YG1671240039 Левый задний соединительный кронштейн педали
Левый задний соединительный кронштейн педали
YG1671240039 Soporte de conexión del pedal trasero izquierdo
Soporte de conexión del pedal trasero izquierdo

Precision Engineering of the YG1671240039 Connecting Bracket

The YG1671240039 is not a simple stamped piece; it is a precision‑engineered connecting bracket that combines advanced material selection with exacting manufacturing tolerances. Manufactured from high‑grade cold‑rolled steel, this bracket provides an optimal balance of tensile strength, toughness, and fatigue resistance, ensuring that it can withstand the constant stepping forces and occasional impacts that heavy‑duty trucks endure. The bracket’s geometry is carefully designed to distribute load evenly across the mounting points, preventing stress concentration and protecting the cab floor from deformation. Its mounting holes are precisely positioned and drilled to match the OEM pattern, guaranteeing a secure, rattle‑free installation without the need for drilling or modification.

The bracket is finished with a durable zinc‑plated coating that provides excellent corrosion resistance, protecting it from road salt, moisture, and debris. The edges are deburred and chamfered to facilitate handling and prevent damage to surrounding components. Every YG1671240039 is inspected for dimensional accuracy, hole alignment, flatness, and surface finish, ensuring that it meets the strictest OEM standards. This attention to detail guarantees that the left rear foot pedal connecting bracket performs flawlessly, maintaining proper pedal alignment and structural integrity over hundreds of thousands of kilometers. Whether your truck operates in construction, mining, or long‑haul applications, this bracket delivers the reliability you need.

High‑Strength Steel – The cold‑rolled steel construction of the YG1671240039 provides exceptional rigidity, preventing bending and ensuring stable pedal support under all conditions.

Precision Fit – The mounting holes and overall dimensions are manufactured to exact OEM tolerances, ensuring a perfect fit and proper pedal alignment.

Corrosion Resistance – The zinc‑plated finish protects the bracket from rust and environmental corrosion, ensuring long‑term durability and easy removal.

Impact Energy Absorption – The bracket’s design helps absorb minor impact energy, protecting the cab floor and pedal assembly from damage during low‑speed collisions.

Key Performance Advantages of the YG1671240039 Bracket

  • Restores Factory Alignment – The YG1671240039 matches the original bracket’s geometry, ensuring that the pedal sits correctly and maintains proper travel and feel.
  • Superior Durability – The high‑strength steel and corrosion‑resistant coating ensure that the bracket withstands years of stepping, vibration, road debris, and weather exposure.
  • Cost‑Effective – Replacing a damaged bracket with the YG1671240039 is far less expensive than dealer parts, and it installs quickly with basic hand tools.
  • Easy Installation – The bracket is designed for a direct bolt‑on replacement, with all mounting points matching the OEM locations for a quick, frustration‑free installation.
  • OEM Grade Quality – Manufactured to exact original equipment specifications, the YG1671240039 guarantees perfect fitment and reliable performance.
  • Improved Safety – A properly secured foot pedal bracket ensures safe entry and exit from the cab, reducing the risk of slips and falls.

Exact Fitment of the YG1671240039 for HOWO, SITRAK, and SHACMAN

The YG1671240039 left rear foot pedal connecting bracket is dimensionally identical to the original equipment part used across a wide range of HOWO, SITRAK, and SHACMAN heavy‑duty trucks. It is specifically designed for the HOWO NX, T5G, T7H, and TX series, as well as compatible SITRAK C7H and G7 models. The bracket’s mounting holes, overall length, thickness, and bend angles match the OEM specifications exactly, ensuring a seamless replacement that requires no drilling, cutting, or modification. By choosing this genuine component, you avoid the risks associated with aftermarket brackets that may have incorrect dimensions, poor material quality, or inadequate corrosion protection, which can lead to pedal misalignment, rattles, and premature failure.

The YG1671240039 has been validated through extensive vibration and durability testing, confirming its ability to maintain structural integrity and proper pedal alignment over hundreds of thousands of kilometers. Fleets that have standardized on this left rear foot pedal connecting bracket report fewer cab‑related complaints, improved driver satisfaction, and reduced maintenance costs. Its robust construction ensures dependable service in the harshest operating environments, from dusty construction sites to rainy and snowy highways. The bracket is also compatible with standard pedal mounting hardware, making it a versatile choice for a wide range of repair and restoration projects.

Installation Best Practices for the YG1671240039 Connecting Bracket

Installing the YG1671240039 left rear foot pedal connecting bracket is a straightforward process that can be completed with basic hand tools. Begin by disconnecting the negative battery terminal for safety and supporting the pedal assembly with a jack or stands to relieve tension on the mounting points. Carefully remove the old bracket by loosening and removing the mounting bolts. Take note of the fastener locations and any shims or spacers that may be present. Clean the mounting surfaces on the cab floor and pedal assembly thoroughly, removing all dirt, rust, and old thread‑locking compound. Inspect the cab floor and pedal assembly for any damage; if any is found, repair it before proceeding.

Position the new YG1671240039 bracket onto the cab floor, aligning the mounting holes with the corresponding threaded inserts. Hand‑start all bolts to ensure proper alignment, then tighten them evenly in a sequential pattern to the manufacturer’s recommended torque. Avoid over‑tightening, as this can distort the bracket or strip the threads. Reconnect the battery and lower the pedal assembly, checking that it sits level and operates smoothly through its full range of motion. Test the pedal for rigidity by gently pushing and pulling on it; if any movement is detected, re‑check the bolt torque and bracket alignment. For maintenance, periodically inspect the bracket for signs of corrosion, cracking, or loose fasteners during routine service. With proper installation and care, the YG1671240039 will provide reliable pedal support and a professional appearance for years.

Rigorous Quality Assurance – Every YG1671240039 Bracket

Each YG1671240039 left rear foot pedal connecting bracket is manufactured in an ISO 9001‑certified facility, following strict process controls from raw material to finished product. The cold‑rolled steel is tested for thickness, tensile strength, and chemical composition before stamping. The progressive die tooling ensures consistent geometry and dimensional accuracy across every production run. After forming, each bracket is deburred and then zinc‑plated for corrosion protection. A 100% visual inspection is performed to detect surface defects, cracks, or incomplete coating.

Random samples from each batch are subjected to dimensional inspection, hardness testing, and salt‑spray corrosion testing to confirm compliance with OEM standards. A fitment test is performed on a master cab buck to ensure proper alignment with the pedal and floor mounting points. This comprehensive quality assurance guarantees that every YG1671240039 delivers the same reliable performance as the original OEM component, giving you full confidence in your replacement.

YG1671240039 Technical Specifications

Parameter Specification
OEM Part Number YG1671240039
Product Name Left Rear Foot Pedal Connecting Bracket
Material High‑Strength Cold‑Rolled Steel
Thickness (mm) 4.0 ± 0.2
Surface Finish Zinc‑Plated (Cr3+ Passivation)
Mounting Hole Count 4
Mounting Hole Diameter (mm) 10.5
Overall Length (mm) 210
Weight (kg) ~0.8
Operating Temperature (°C) ‑40 to +120
Fitment HOWO NX/T5G/T7H/TX, SITRAK C7H/G7, SHACMAN
Recommended Torque (Nm) 45 – 55

Why Fleets and Technicians Trust the YG1671240039 Bracket

Fleet managers and technicians consistently choose the YG1671240039 because it delivers reliable pedal support and long‑term durability at a competitive price. The bracket’s precise fit and high‑quality zinc‑plated finish eliminate common problems such as misalignment, corrosion, and vibration that are often associated with cheaper aftermarket parts. Many workshops report a significant reduction in cab‑related complaints after installing this genuine OEM bracket, and drivers appreciate the secure, rattle‑free pedal that reflects well on the fleet. The YG1671240039 is also supplied in robust packaging that protects the bracket during transport and storage, and its clear OEM number simplifies parts identification.

Moreover, the YG1671240039 is backed by a comprehensive quality guarantee and is supported by our technical team. Its availability through our distribution network ensures fast delivery when you need it most. When you choose this left rear foot pedal connecting bracket, you are selecting a component that has been engineered and tested to the highest standards, offering the perfect balance of strength, precision, and value. Keep your truck safe and your fleet moving with the YG1671240039.

Conclusion – Secure Your Pedal with the YG1671240039 Bracket

In summary, the YG1671240039 Left Rear Foot Pedal Connecting Bracket is a premium replacement component that restores your truck’s pedal alignment while providing essential structural support for safe cab access. Its exact OEM fitment, high‑strength steel construction, and corrosion‑resistant finish ensure that it meets the demanding requirements of heavy‑duty operation. By investing in this genuine replacement part, you are enhancing the safety, reliability, and comfort of your HOWO, SITRAK, or SHACMAN truck, all while reducing overall maintenance costs.

Don’t compromise on pedal integrity or safety – choose the YG1671240039 for your next bracket replacement. With its proven track record and widespread acceptance among professionals, this left rear foot pedal connecting bracket is the smart choice for anyone who values quality, durability, and peace of mind. Keep your truck safe and your drivers confident with the YG1671240039 – the definitive choice for HOWO and SITRAK professionals.

Related Products

Knowledge Of Truck Repair And Maintenance

2026-05-21

Inside the Engine Room: How China National Heavy Duty Truck Group Company Limited Achieved 22.5% Sales Surge to Become the World’s Heavy Truck Champion

Inside the Engine Room: Ho […]
2026-05-21

Inside Africa’s Mining & Construction Boom: Why the Top Howo Parts Supplier Is Powering 150,000 Trucks Annually

Inside Africa’s Mining � […]
2024-08-16

Las Cinco Señales de Advertencia del Eje de Dirección Intermedio del Camión

Las Cinco Señales de Adver […]
2024-08-16

¿Por qué hay un problema con el engranaje de cambio de doce dientes?

¿Por qué hay un problema c […]
2024-08-16

Optimizando la Eficiencia del Combustible en los Camiones Sinotruk: Una Mirada al Sistema de Combustible del Camión

Optimizando la Eficiencia […]
2024-08-16

¿Cómo Puedo Garantizar la Integridad de las Piezas de Repuesto Howo Sinotruk 371 a Través del Cuidado Rutinario?

¿Cómo Puedo Garantizar la […]
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad

Chat with us

We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.