WG9003071105 HOWO Assembled Oil Seal – Dual‑Lip Protection for Leak‑Free Drivetrain Performance

Assembled Oil Seal / Double Oil Seal

Двойное масляное уплотнение в сборе

Sello de aceite doble ensamblado

Why WG9003071105 Assembled Oil Seal Is Vital for Your HOWO Drivetrain

The WG9003071105 assembled oil seal (double oil seal) is a key component in maintaining the integrity of your HOWO truck’s lubricated systems. In heavy‑duty applications, wheel hubs, axle inputs, and transmission outputs are subjected to extreme rotational speeds, high temperatures, and constant exposure to road debris. A single‑lip seal may allow minor weepage or ingress of contaminants over time, leading to premature bearing failure, increased wear, and costly repairs. This double‑lip design features a primary sealing lip that retains lubricant and a secondary dust lip that blocks external contaminants, providing a robust barrier that significantly extends component life. By installing the genuine WG9003071105 assembled oil seal, you ensure that your drivetrain remains clean, well‑lubricated, and fully protected against the harsh operating conditions typical of heavy‑duty trucking.

Technical Specifications – WG9003071105 Assembled Oil Seal (Double Oil Seal)

Primary Applications of WG9003071105 in HOWO & Sitrak Vehicles

The WG9003071105 assembled oil seal (double oil seal) is used in a variety of sealing applications across HOWO and Sitrak heavy‑duty trucks. It is commonly found in wheel hub assemblies, axle input seals, transmission output shafts, and transfer case applications. This seal is particularly suited for the front and rear wheel hubs of HOWO‑7, HOWO T series, HOWO A7, Sitrak C7H, T7H, and M5G models, where it protects bearings from lubricant loss and external contamination. Its double‑lip design makes it ideal for off‑road and construction vehicles that operate in dusty or wet environments, ensuring reliable sealing performance under the most challenging conditions.

Superior Quality – What Makes WG9003071105 Stand Out

The WG9003071105 assembled oil seal is manufactured under strict quality control to deliver consistent, reliable sealing performance. Unlike generic aftermarket seals that may use inferior elastomers or imprecise metal casings, this genuine HOWO component is produced using premium NBR or FKM compounds that offer excellent resistance to oil, heat, and ozone. The sealing lips are precision‑moulded with a hydrodynamic profile that promotes a thin oil film for lubrication while preventing leakage. The steel casing is zinc‑plated to resist corrosion, and the garter spring ensures constant lip pressure against the shaft, compensating for minor wear and thermal expansion. Each seal is tested for dimensional accuracy, lip geometry, and spring tension to guarantee a perfect fit and long service life. This level of quality ensures that your drivetrain remains leak‑free and protected, reducing maintenance costs and extending component life.

Installation & Maintenance Guidelines for WG9003071105

Correct installation of the WG9003071105 assembled oil seal is crucial to achieving optimal sealing performance and service life. Always refer to the appropriate workshop manual for your HOWO or Sitrak model before beginning any seal replacement. Start by carefully removing the old seal using a suitable puller, taking care not to damage the housing bore or shaft surface. Clean the bore and shaft thoroughly with a non‑abrasive solvent, removing all old sealant, dirt, and burrs. Inspect the shaft for wear, scoring, or corrosion – if damaged, the shaft should be repaired or replaced. Lubricate the new seal lip with clean oil or grease, and apply a thin layer of sealant to the outer metal casing to ensure a leak‑proof fit in the bore. Use a proper seal installation tool or a soft‑faced driver to press the seal evenly into the housing, ensuring it is seated square and flush with the bore face. Avoid cocking or damaging the seal lip during installation. After assembly, check the seal lip orientation (dust lip facing outward) and rotate the shaft manually to confirm smooth operation.

• Always replace the seal when servicing wheel hubs, axles, or transmissions – never reuse an old seal.
• Ensure the shaft surface finish is within specification (Ra ≤ 0.8 µm) to avoid premature lip wear.
• Use a seal installer that matches the outer diameter to prevent distortion.
• After installation, fill the cavity with the recommended lubricant to prevent dry start‑up.
• Store spare seals in a cool, dry place away from direct sunlight and ozone sources.

Genuine WG9003071105 – The Smart Choice for Leak‑Free Reliability

Choosing the WG9003071105 genuine assembled oil seal is one of the most effective ways to prevent lubricant leaks and protect your HOWO or Sitrak drivetrain from premature wear. A failed seal can lead to oil starvation, bearing seizure, and costly repairs that could have been avoided with a quality replacement. By using a genuine OEM seal that meets Sinotruk’s exact specifications, you ensure a perfect fit, reliable sealing performance, and extended service intervals. Fleet operators and workshop professionals worldwide trust this double‑lip seal to maintain the integrity of their wheel hubs, axles, and transmissions, reducing unplanned downtime and lowering total cost of ownership. With its proven durability and precision engineering, it is the definitive choice for those who demand the best from their equipment.

Compatibility – WG9003071105 with HOWO & Sitrak Models

The WG9003071105 assembled oil seal is designed to fit a comprehensive range of HOWO and Sitrak heavy‑duty trucks. It is a direct replacement for the original seal used in the front and rear wheel hubs of HOWO‑7, HOWO T series, HOWO A7, Sitrak C7H, T7H, and M5G models. It is also suitable for axle input shafts, transmission outputs, and transfer case applications across these vehicle families. This seal is commonly specified in OEM parts catalogs for hub bearing and axle overhaul kits. Always verify the OEM number WG9003071105 on the part or packaging to ensure you are installing the correct seal for your specific application.

Durability & Performance – WG9003071105 in Extreme Conditions

HOWO and Sitrak trucks are subjected to some of the harshest operating conditions imaginable – from freezing Arctic routes to scorching desert heat, from muddy construction sites to salt‑sprayed coastal highways. The WG9003071105 assembled oil seal is engineered to perform reliably across this entire spectrum. Its NBR compound remains flexible at low temperatures, preventing cracking and leakage, while its heat resistance maintains sealing integrity even in high‑temperature axle applications. The double‑lip design provides an additional barrier against water, mud, and dust ingress, ensuring that bearings and gears remain protected even when operating in extreme off‑road conditions. This seal is built to last, delivering leak‑free performance for the full recommended service interval, reducing the risk of costly failures and keeping your trucks on the road.

Packaging & Ordering Information for WG9003071105

The WG9003071105 assembled oil seal is supplied in protective packaging that ensures safe delivery and storage. Each seal is individually wrapped to prevent damage and contamination during transport. The packaging is clearly labelled with the OEM number, product name, and key dimensions for easy identification. Bulk ordering options are available for workshops, fleet maintenance depots, and OEM service centres, offering significant cost savings and streamlined inventory management. Always check the label to confirm the OEM number WG9003071105 before installation to guarantee you are using the correct genuine component.

• Single unit – individually packaged to prevent damage
• Box of 5 or 10 seals for workshop and fleet stock
• Each seal sealed in anti‑corrosion packaging to prevent rust
• Label includes OEM WG9003071105, dimensions, and material type
• Custom bulk packaging available for large‑scale orders

Choose WG9003071105 assembled oil seal – the professional‑grade sealing solution that delivers leak‑free protection, exceptional durability, and reliable performance for your HOWO or Sitrak truck.