The SEA110205 air filter (ХИЙН ХУВААРЬЛАГЧ) is not just a routine replacement item – it is the first line of defence against engine‑destroying contaminants. In heavy‑duty applications, engines can ingest several kilograms of dust over their lifetime, and even a small amount of abrasive particles can cause scoring of cylinder walls, ring wear, and turbocharger impeller damage. This genuine HOWO filter uses a high‑density micro‑fiber media that captures over 99.5% of particles as small as 5 microns, ensuring that only clean, measured air enters the cylinders. The benefits are tangible: consistent power output, optimal fuel efficiency, lower oil contamination, and extended component life. By investing in this premium filter, you reduce total operating costs and keep your trucks on the road with fewer unscheduled interruptions.
High‑Efficiency Filtration
Advanced cellulose/synthetic media captures ≥99.5% of particles at 5 μm, protecting critical engine components.
Optimised Airflow
Deep‑pleated design maximises filter surface area, maintaining low intake restriction and full engine power.
Durable Construction
Robust metal end caps and heat‑stabilised pleats resist collapse under extreme pulsing airflow and vibration.
OEM‑Exact Fit
Manufactured to Sinotruk’s strict specifications – direct replacement without modifications.
| Parameter | Specification |
|---|---|
| OEM Number | SEA110205 |
| Product Name | ХИЙН ХУВААРЬЛАГЧ (Air Filter) |
| Outer Diameter | 220 mm ± 2 mm |
| Inner Diameter | 135 mm ± 1.5 mm |
| Height | 350 mm ± 3 mm |
| Media Type | High‑grade cellulose/synthetic micro‑fibre blend |
| Filtration Efficiency | ≥ 99.5% @ 5 μm (ISO 5011) |
| Dust Holding Capacity | ≥ 280 g (ISO 5011) |
| Operating Temperature | -40°C to +80°C |
| Moisture Resistance | Hydrophobic treatment – resists water absorption |
| Recommended Service Interval | 20,000 – 30,000 km (or as per vehicle maintenance schedule) |
| OEM Cross‑Reference | WG9725160045, 81.08410.0038 |
The SEA110205 air filter (ХИЙН ХУВААРЬЛАГЧ) is designed as a direct replacement for the original equipment filter used in a broad range of HOWO and Sitrak heavy‑duty trucks. It is fully compatible with HOWO‑7, HOWO T series, HOWO A7, Sitrak C7H, T7H, and M5G models, as well as many construction and mining machines that share the same air cleaner housing. This filter is especially recommended for vehicles operating in high‑dust environments such as quarry haulers, dump trucks, concrete mixers, agricultural equipment, and long‑haul trucks. Its high dust‑holding capacity and robust construction make it ideal for both on‑road and off‑road applications, delivering consistent engine protection regardless of the terrain or climate.
The SEA110205 air filter is manufactured using state‑of‑the‑art production techniques and rigorous quality assurance protocols. Its proprietary micro‑fibre blend delivers an optimal balance between filtration efficiency and airflow, ensuring that your engine receives clean air without unnecessary restriction. The pleats are thermally bonded to maintain their geometry under pulsating intake flow, preventing distortion that can lead to premature clogging or media failure. The polyurethane end seals are precision‑moulded to provide a leak‑proof fit, eliminating the risk of unfiltered air bypass. Every filter is tested for burst strength, efficiency, and pressure drop in accordance with ISO 5011, guaranteeing consistent performance that matches or exceeds the original equipment. This level of quality translates directly into longer engine life, fewer repairs, and lower operating costs.
Certified Efficiency
Independent lab testing confirms ≥99.5% capture of particles at 5 μm, ensuring superior engine protection.
Moisture‑Repellent Media
Hydrophobic treatment prevents water uptake, maintaining filtration integrity in wet or humid conditions.
Extended Service Intervals
High dust‑holding capacity (≥280 g) allows longer service life, reducing maintenance frequency and cost.
Genuine OEM Quality
Manufactured to Sinotruk’s exact specifications – guaranteed fit, form, and function.
Replacing your SEA110205 air filter is a quick and straightforward procedure that requires minimal tools. Always park the vehicle on a level surface, apply the parking brake, and allow the engine to cool completely. Open the air cleaner housing by releasing the clamps or bolts, carefully remove the old filter, and inspect the interior of the housing for dirt accumulation or damage. Wipe the housing clean with a damp cloth, paying attention to the sealing surface. Install the new filter, ensuring it is seated evenly and fully within the housing. Close the housing and secure all clamps firmly. To maximise filter life, check the intake duct and pre‑cleaner regularly, and replace the filter more frequently in extremely dusty conditions. Always follow the vehicle manufacturer’s recommended service intervals.
Choosing the SEA110205 genuine air filter is one of the most effective decisions you can make to protect your engine and optimise your fleet’s profitability. Contaminated intake air is a major contributor to premature engine wear, leading to increased oil consumption, loss of compression, and eventual costly overhauls. By installing a filter that meets Sinotruk’s original equipment specifications, you guarantee that your engine breathes only clean, filtered air, which promotes complete combustion, consistent horsepower, and reduced fuel usage. Fleet operators around the globe rely on this filter to keep their HOWO and Sitrak trucks performing at their best, even in the most demanding conditions. Its proven track record of reliability and longevity makes it the unequivocal choice for professionals who refuse to compromise on quality.
“After switching to the SEA110205 air filters on our fleet of 30 HOWO T‑series trucks operating in a coal mine, we observed a 25% reduction in engine wear‑related failures and a noticeable improvement in fuel economy. This filter is simply the best we have used.”
The SEA110205 air filter is engineered to fit perfectly in the air cleaner housings of a comprehensive range of HOWO and Sitrak heavy‑duty trucks. It is a direct OE replacement for HOWO‑7, HOWO T series, HOWO A7, Sitrak C7H, T7H, and M5G models, and is also compatible with many construction and agricultural machines that utilise the same filter size. Always confirm the OEM number SEA110205 on the part or packaging to ensure you are installing the correct filter for your specific application.
Heavy‑duty trucks are subjected to some of the harshest operating conditions imaginable – from the scorching heat and abrasive dust of desert mining to the freezing cold and slush of northern logging roads. The SEA110205 air filter is engineered to perform flawlessly across this entire spectrum. Its synthetic‑blend media resists moisture absorption, preventing the filter from becoming waterlogged and restricting airflow, even in heavy rain or snow. The heat‑stabilised pleats maintain their structure under the intense pulsating airflow of a turbocharged diesel, while the durable polyurethane seals remain flexible at sub‑zero temperatures, ensuring a perfect seal. This filter is built to deliver consistent engine protection for the full duration of its service life, reducing downtime and keeping your vehicles productive.
Extreme Temperature Range
Reliable operation from -40°C to +80°C – no cracking or loss of efficiency.
Moisture & Humidity Resistant
Hydrophobic media prevents water uptake, ensuring consistent filtration in wet conditions.
Low Restriction
Maintains minimal pressure drop even at high airflow, ensuring full engine power and throttle response.
Vibration & Impact Resistant
Robust construction withstands road shocks and engine vibrations without pleat collapse or seal failure.
The SEA110205 air filter is packaged in a sturdy, environmentally friendly carton that ensures safe delivery and long‑term storage. Each filter is individually sealed in a protective plastic bag to prevent contamination from dust and moisture during transport. The packaging is clearly labelled with the OEM number, product name (ХИЙН ХУВААРЬЛАГЧ), and key dimensions for quick identification. Bulk packaging options are available for workshops, fleet depots, and OEM service centres, offering significant cost savings and streamlined inventory management. Always check the label to confirm the OEM number SEA110205 before installation to guarantee you are using the correct genuine component.
OEM: SEA110205 | Genuine HOWO / Sitrak Air Filter (ХИЙН ХУВААРЬЛАГЧ)
Choose SEA110205 ХИЙН ХУВААРЬЛАГЧ – the professional‑grade air filter that delivers uncompromising engine protection, optimal airflow, and lasting durability for your HOWO or Sitrak truck.
We are a heavy-duty truck parts store. Please leave your contact information and inquiries. We will respond within 12 hours.
