080V02201-0158 HOWO Shock Absorber – Precision Engineered for Unmatched Ride Comfort and Suspension Control

Shock absorber

Амортизатор

Amortiguador

Why 080V02201-0158 Shock Absorber Is Vital for Your HOWO Suspension

The 080V02201-0158 shock absorber is a critical component of your HOWO truck’s suspension system, responsible for controlling spring oscillations and maintaining tyre contact with the road surface. Its primary function is to convert kinetic energy from road irregularities into thermal energy, which is then dissipated through the hydraulic fluid, providing a smooth, controlled ride. In heavy‑duty trucks, effective shock absorption is essential for driver comfort, cargo protection, and vehicle stability, especially when navigating rough terrain, potholes, or uneven loads. A worn or leaking shock absorber can lead to excessive body roll, reduced braking performance, uneven tyre wear, and increased driver fatigue. By installing the genuine 080V02201-0158 shock absorber, you restore factory‑specified damping characteristics, ensuring optimal ride quality and handling.

Technical Specifications – 080V02201-0158 Shock Absorber

Key Applications of 080V02201-0158 in HOWO & Sitrak Vehicles

The 080V02201-0158 shock absorber is a direct replacement for the original component used in a wide range of HOWO and Sitrak heavy‑duty trucks. It is a critical part of the front and rear suspension systems and is commonly specified for:

Superior Quality – What Makes 080V02201-0158 Stand Out

The 080V02201-0158 shock absorber is manufactured to the highest quality standards, ensuring it outperforms generic aftermarket alternatives. Featuring a twin‑tube hydraulic design with precision‑tuned valving, this shock absorber provides consistent damping force across a wide range of operating conditions. The piston rod is hard‑chromed and ground to a mirror finish, reducing friction and extending seal life. The seamless, drawn‑over‑mandrel (DOM) steel tube body is protected by a durable powder‑coat or zinc‑plated finish, offering exceptional resistance to corrosion and stone damage. Each shock absorber is dyno‑tested to verify damping force characteristics and leakage integrity before leaving the factory. This commitment to quality translates into superior ride comfort, improved vehicle stability, and extended suspension component life.

Installation & Maintenance Guidelines for 080V02201-0158

Installing the 080V02201-0158 shock absorber requires careful attention to safety and proper torque. Always refer to the appropriate workshop manual for your HOWO or Sitrak model. Before installation, ensure the vehicle is securely supported on jack stands and that the suspension is at full droop. Remove the old shock absorber and inspect the mounting bushings and hardware for wear or damage – replace if necessary. Compress the new shock absorber by hand to check for smooth, consistent resistance through the full stroke. Install the new unit, ensuring the upper and lower mounting bolts are tightened to the specified torque (typically 80‑100 Nm for M12 bolts, 150‑180 Nm for M16 bolts). After installation, test the vehicle on a variety of road surfaces to verify ride quality and handling. During routine maintenance, inspect the shock absorber for signs of oil leakage, damaged dust covers, or bent rods, and replace if necessary.

• Always replace shock absorbers in pairs (front or rear axle) to maintain balanced handling.
• Inspect mounting hardware for wear or corrosion – replace if necessary.
• Use a torque wrench to ensure all fasteners are tightened to the correct specification.
• After installation, perform a bounce test to verify proper damping function.
• Inspect shock absorbers at every service interval for signs of leakage or damage.
• Store spare shock absorbers upright in a clean, dry environment to prevent seal damage.

Genuine 080V02201-0158 – The Smart Choice for Suspension Reliability

Choosing the 080V02201-0158 genuine shock absorber is an investment in the long‑term safety, comfort, and performance of your HOWO or Sitrak truck. Inferior aftermarket shock absorbers often use lower‑quality oil, imprecise valving, and substandard seals – leading to premature fading, leakage, and reduced damping performance. By using a genuine OEM component that adheres to Sinotruk’s exacting standards, you guarantee perfect fitment, consistent damping characteristics, and maximum durability. Fleet operators and workshop professionals worldwide trust this shock absorber to maintain the integrity of their suspension systems, reduce driver fatigue, and lower overall maintenance costs. With its proven quality and reliability, it is the definitive choice for those who demand excellence.

Compatibility – 080V02201-0158 with HOWO & Sitrak Models

The 080V02201-0158 shock absorber is designed to fit a comprehensive range of HOWO and Sitrak heavy‑duty trucks, including the most popular models. It is a direct replacement for the original shock absorber fitted at the factory, ensuring a seamless swap without any modifications. Always confirm the OEM number 080V02201-0158 on your original shock absorber or by cross‑referencing your vehicle’s VIN with the Sinotruk parts catalogue. For any uncertainty, consult your local HOWO or Sitrak dealer with your chassis number.

Durability & Performance – 080V02201-0158 in Extreme Conditions

HOWO and Sitrak trucks are subjected to the most punishing road conditions – from freezing winter roads to scorching summer highways, from rough construction sites to salt‑sprayed coastal routes. The 080V02201-0158 shock absorber is engineered to withstand these extremes. Its high‑quality hydraulic fluid maintains consistent viscosity across a wide temperature range, ensuring reliable damping performance in both cold and hot climates. The hard‑chromed piston rod resists corrosion and pitting, while the multi‑lip sealing system prevents oil leakage and contamination ingress. This shock absorber is built to deliver reliable, maintenance‑free performance for the entire service life of your vehicle, reducing unplanned downtime and repair costs.

Packaging & Ordering Information for 080V02201-0158

The 080V02201-0158 shock absorber is supplied in protective packaging to ensure safe delivery and convenient storage. Each shock absorber is individually wrapped in anti‑corrosion paper and sealed in a plastic bag to prevent contamination. Bulk packaging options are available for workshops, fleet depots, and OEM service centres, offering cost savings and streamlined inventory. Every pack is clearly labelled with the OEM number, product name, and key specifications for easy identification. Always verify the OEM number 080V02201-0158 on the label before installation to ensure you are using the correct genuine component.

• Single unit – individually sealed to prevent corrosion
• Box of 2 shock absorbers (pair) for workshop and fleet stock
• Each unit sealed in anti‑corrosion paper to prevent rust
• Label includes OEM 080V02201-0158, dimensions, and material
• Custom bulk packaging available for large‑scale orders

Choose 080V02201-0158 shock absorber – the professional‑grade suspension component that delivers superior ride control, exceptional durability, and reliable performance for your HOWO or Sitrak truck.