

Engineered to seamlessly connect the cab’s electronic systems with the ZF automated manual transmission, the 712W25455-6103 Cab Additional Wiring Harness is a premium component for Howo/Sitrak truck parts inventory. This dedicated harness enables flawless communication between the gear selector, clutch actuator, and transmission control unit, ensuring smooth gear shifts and optimal fuel efficiency. With the 712W25455-6103, you restore factory-grade connectivity and unlock the full potential of your ZF AMT-equipped truck.
The 712W25455-6103 is not just a bundle of wires – it is a precision‑engineered interface that bridges the cab’s control systems with the ZF automated manual transmission. In modern heavy‑duty trucks, the AMT relies on a complex network of sensors, actuators, and control modules to execute perfect shifts. A damaged or inferior additional harness can lead to delayed gear engagement, rough shifting, or even complete transmission failure. The 712W25455-6103 eliminates these risks with OEM‑grade connectors, shielded conductors, and a robust outer sleeve that withstands the rigors of daily commercial operation. Whether you are replacing a worn harness or upgrading a base‑spec cab, this component ensures that your ZF AMT performs exactly as the manufacturer intended.
The 712W25455-6103 is a cab additional wiring harness designed specifically for HOWO and Sitrak trucks equipped with ZF automated manual transmissions. It provides the necessary electrical connections between the gear selector, the clutch actuator, the transmission control unit (TCU), and the vehicle’s main harness. The harness comprises multiple conductors for power, ground, CAN‑bus communication, and diagnostic signals, all bundled into a single, easy‑to‑route assembly.
Manufactured from high‑strand copper wire, the 712W25455-6103 ensures excellent conductivity and resistance to vibration fatigue. Each conductor is insulated with cross‑linked polyethylene (XLPE), which offers superior dielectric strength and thermal stability. The entire harness is wrapped in a durable PET braided sleeve that provides mechanical protection and reduces the risk of chafing against sharp edges. Connectors are OEM‑specified, with gold‑plated terminals that maintain low contact resistance over thousands of mating cycles.
This additional harness is a direct OEM replacement for the original equipment on HOWO T7h, T5g, Sitrak C7h, and Sinotruk NX series trucks with ZF AMT. It is also compatible with many other heavy‑duty vehicles that use a similar ZF AMT interface. Whether you are repairing a damaged harness or retrofitting a ZF AMT into a truck that previously had a manual transmission, the 712W25455-6103 provides the quality and reliability you expect from genuine SINOTRUK parts.
| OEM Number | 712W25455-6103 |
| Product Name | Cab Additional Wiring Harness (ZF AMT) |
| Brand | HOWO / Sitrak (OEM) |
| Length | 2.8 meters (main trunk) + branches |
| Number of Circuits | 12 (power, ground, CAN, sensor, diagnostic) |
| Conductor Gauge | 1.5 mm² (power) / 0.75 mm² (signal) |
| Temperature Range | -40°C to +125°C |
| Insulation Material | XLPE with PET braided sleeve |
| Connector Types | 16‑pin AMP (TCU), 6‑pin JST (selector), 4‑pin Deutsch (actuator) |
| Certification | ISO 6722, SAE J1128, RoHS |
This cab additional wiring harness is designed to fit the following HOWO and Sitrak models, as well as many other heavy‑duty vehicles using a ZF AMT:
Always verify the connector type and transmission model before ordering. This harness is designed for ZF AMT systems and may not be compatible with other transmission brands.
Every 712W25455-6103 harness is produced in an ISO‑9001 certified facility and undergoes a comprehensive battery of tests before shipment. We verify pin continuity, contact resistance, insulation resistance, and voltage drop on every harness. The connectors are tested for insertion/withdrawal force, sealing (IP67), and corrosion resistance (200‑hour salt spray). The harness is subjected to a 500‑cycle thermal shock test (-40°C to +125°C) and a 10G vibration test to ensure it withstands the toughest trucking environments. With the 712W25455-6103, you receive a component that has been proven to meet or exceed OEM specifications for durability and performance.
Replacing your cab additional wiring harness with the 712W25455-6103 is a straightforward process: disconnect the battery, locate the existing harness between the gear selector, clutch actuator, and TCU, and unplug the connectors. Route the new harness along the same path, securing it with the supplied clips. Connect the 16‑pin AMP plug to the TCU, the 6‑pin JST to the gear selector, and the 4‑pin Deutsch to the clutch actuator. Reconnect the battery and perform a system self‑test using a diagnostic tool. The entire installation takes about 30 minutes and requires only basic hand tools.
For fleet maintenance, keeping a stock of the 712W25455-6103 ensures that any damaged harness can be replaced immediately, minimising vehicle downtime and maintaining smooth transmission operation.
Low‑quality aftermarket harnesses often use undersized wires and poor insulation, leading to voltage drops, signal interference, and intermittent transmission faults. The 712W25455-6103 is manufactured to the highest standards, with high‑strand copper conductors that maintain low resistance and excellent flexibility. Its XLPE insulation and PET braided sleeve provide outstanding protection against abrasion, heat, and chemicals. By choosing this OEM harness, you ensure that your ZF AMT operates flawlessly, delivering smooth shifts and optimal fuel efficiency.
The 712W25455-6103 is engineered to withstand the extreme conditions of commercial vehicle operation – from freezing winter mornings to scorching summer heat, and from constant vibration to exposure to mud, dust, and chemicals. Its sealed connectors and rugged harness ensure that your transmission control system remains functional in any environment. With this harness, you can trust that your truck’s AMT will perform reliably, mile after mile.
Whether you are repairing a damaged harness or retrofitting a ZF AMT, the 712W25455-6103 Cab Additional Wiring Harness (ZF AMT) offers the quality, performance, and durability that professional technicians and fleet managers expect. Its OEM pedigree and robust design make it the preferred choice for maintaining your vehicle’s advanced transmission systems.
Explore the full range of Howo/Sitrak truck parts to find every component you need for your heavy‑duty vehicle.